METAL WORK pressure regulators

Pressure: 413.7 bar
Temperature: -40 °C - 149 °C

The Model GR™ Genie® Pressure Regulator is a single stage pressure regulator designed specifically for use in gas analyzer sample conditioning systems. Its stainless steel housing contains ...

Pressure: 0 bar - 0.98 bar
Orifice diameter: 8 mm - 65 mm

Initial Pressure Controler; springloaded; stainless steel; with screwed or with flanged ends; operated by piston or by diaphragm

Pressure: 350 bar

Description Pressure regulators limit the maximum pressure of a hydraulic circuit, for its security. This is obtained by means of valves that include almost all the range of pressure ...

Pressure: 10 bar

... non-burning gases (up to 5.0 purity) Inlet pressure 10 bar max. Outlet pressure 0.2-4 bar Inlet / outlet connections: Female threads ISO 228 G1/4" (other connections available) Integrated outlet pressure ...

Pressure: 1 bar - 14 bar
Flow: 800 l/min - 5,000 l/min

Pressure: 0 bar - 200 bar
Orifice diameter: 6.3, 0.07 mm

A single stage regulator for nitrogen reducing the inlet pressure from 200bar to any pressure between 0 and 200 bar. One of the main application used onboard is for pressure ...

Pressure: 34.47 bar
Flow: 50 ft³/min

Control high pressure electronically Pressure ranges from vacuum to 500psig Available in lightweight aluminum or oxygen compatible brass bodies High forward and high relief ...

Pressure: 200 bar

... Bottle pre-pressure 300 bar. • Star-Regulator Bottle-connection on backside – Bottle pre-pressure 200 bar. Extraction Point Pressure Regulator Extraction Point ...

Pressure: 350, 220 bar

... available on request. Outlet pressure up to 15 bar (218 psi) is controlled by a diaphragm; greater outlet pressures are controlled by a piston. The main valve is balanced for outlet pressure ...

Pressure: 0 bar - 9 bar
Flow: 8 l/min - 1,200 l/min
Orifice diameter: 0.13, 0.25 in

... series of 0-8 bar proportional pressure regulator- low flow 500 L/min, and economic type high flow. The low flow version consists of two solenoid valves, one high-processing speed digital electronic board, ...

Pressure: 2, 4, 8 bar

Precision Regulator • Available in 2 bar, 4 bar 8t 8 bar pressure range. • Sensitivity 0.2%. • Repeatability 0.5%. • Light weight.

Pressure: 0 bar - 4,000 bar
Orifice diameter: 1.5 in

... T-Handle for smooth adjustment • Blow off disc type pressure relief for low pressure gauge protection only • Protective rubber gauge boots

Pressure: 0 bar - 10 bar
Flow: 1,200 l/min - 1,700 l/min

Mini air regulator. Mechanized from a solid aluminium block. Diaphragm regulator from 0 to 10 bar. Quality pressure gauge up to 10 bar. Stand included for assembly on the wall. Standard ...

Pressure: 0.5 bar - 8 bar
Orifice diameter: 1 in
Temperature: 0 °C - 50 °C

pressure-control-valve 1" Inch made of plastic polyamid female thread seal NBR for air, set pressure 0.5 - 8.0 bar design: - straightway form installation position: - only in vertical position product ...

Pressure: 0 bar - 8 bar
Orifice diameter: 0 mm - 10 mm
Temperature: 0 °C - 70 °C

Compact pressure regulator, Quick connector for hose 10/8, G 1/4, Piston pressure regulator with self-relieving design, hollow bolt and pivoting ring piece. The regulator ...

Pressure: 0 psi - 1,000 psi

... cardboard box Body burst pressure up to 4350 PSI These regulators are intended for primary pressure control on non-corrosive, high purity or liquefied gases (up to ...

Series 5D pressure keeping valves are used to eliminate overpressures due to operation or due to the system. It eliminates pressure peaks by relieving the system if the set pressure is ...

Pressure: 0 psi - 5 psi

... stable air pressure put into the inlet in the die to control the ID inner diameter of the tube. Range are available from 0-3" of water up to the maximum of 0-5 psi. Meters are available in psi, inches ...

Pressure: 0 psi - 20,000 psi
Temperature: 0 °C - 49 °C

The NuQuip® Model PR Series Pressure Regulator is a pressure reducing device utilizing an air actuator for precise control of high pressures. These regulators ...

... and performance and safer, more efficient refueling of military aircraft. The Cla-Val Model 341GF-D3 Nozzle is used for pressure fuel servicing of fixed-wing aircraft, other types of military aircraft, as well as for ...

Pressure: 0.35 bar - 1.4 bar

Designed to reduce first stage pressure 5-20 PSIG (.035- 1.4 bar) down to a pressure higher than 11” W.C (28 mbar), the actual pressure setting is specified in the table below. Ideal ...

Pressure: 0 bar - 4 bar
Flow: 12 l/h

High pressure regulator for gas fluids as LPG (butane, propane) that ensures principally the function of single stage regulation in LPG equipment. Temperature working range as per regulations ISO EN16129 ...

Pressure: 0 bar - 50 bar

Maximal inlet pressure (bar) : 50 Outlet pressure (bar) : 0.5 - 12 Maximum discharge (nm3/h) : 400 Gas compatibility : Non corrosive gas + O2 and C2H2 and propane and butane

Pressure: 0.8 bar - 85 bar
Temperature: -10 °C - 60 °C

PILOT-OPERATED GAS PRESSURE REGULATORS Aperflux 101 The Aperflux 101 is a pilot-controlled pressure regulator for medium and high pressure. Aperflux is a "fail open" ...

The BelGAS P200 gas pressure regulator is a manual, direct acting, self-operating, spring loaded adjustable regulator, used in applications where pressure reduction is ...