MOOG control valves

DN: 0.125 mm

This flow control valve is provided for repeatable oil flow control in one direction. This valve prevents damages to the system caused by high flow rates. It was made ...

DN: 0.125 in - 0.25 in
Pressure: 7 psi - 135 psi
Temperature: -20 °C - 70 °C

1、Delicate and compact structure; 2、Available to exhaust and cut off flow, sensitive in adjustment, high precision; 3、Install in several positions to facilitate installation and application.

Pressure: 0 bar - 0 bar
Temperature: 250 °C - 450 °C

Bakeable leak valves are used to control the flow of gas into a vacuum system from an external source. A soft metal pad is compressed against a harder metal seat, creating the necessary seal for precise ...

Product Feature - Excellent Flow Characteristics, High sensitivity and easy to adjust. - Proline flow control regulators with polymer, nickel-plated brass or métal bodies, external or recessed adjustment ...

Low-load start-up control valves supply the boiler with the required quantity of feedwater during start-up (30–50% of the water required for full-load operation), regulated by volume, at higher pressure ...

DN: 0.5 in
Pressure: 0 bar - 16 bar
Flow rate: 0 m³/min - 60 m³/min

... no power connection. Equipped with a valve for flushing the system and functional testing and control. Advantages Works with oil contaminated condensate Works without loss of compressed air ...

DN: 10 mm
Pressure: 320 bar
Flow rate: 400 l/min

3/2-way valve cartridge for electric, direct and pilot controls applicable. Connection: DN10

DN: 15 mm - 150 mm
Pressure: 16, 40 bar
Temperature: -20 °C - 70 °C

2-way control valve with pneumatic, single acting actuator and positioner - option with electric actuator and positioner. Suitable for gas, liquid and steam.

DN: 0.125 in
Pressure: 0 bar - 400 bar

Mini Needle Valve, Tradinco T1700 Special instrumentation-needle valve for vacuum and pneumatic pressures up to 400 bar. Excellent feel and low torque allows high accurate control ...

Pressure: 35 bar

It is used to control the flow for regulator or pipe system

DN: 65, 80, 100, 150 mm
Pressure: 20 psi - 250 psi

The TYCO Model DPV-1 Dry Pipe Valves are differential valves used to automatically control the flow of water into dry pipe fire protection sprinkler systems upon operation of one or more ...

DN: 11.6 mm - 100 mm
Temperature: -30 °C - 180 °C

DESCRIPTION • 2-way ball valve BSP female threaded • Full bore • Body, ball and stem SS316 • Seats PTFE 15% glassfiber filled • Working pressure maximum 63 Barg • Temperature -15º up to + 180º C. • Blow-out proof ...

DN: 15 mm - 50 mm

Model No.: CS100-Socket, CS200-Thread, CS300-Flanged Body Material:UPVC,PP Seat:PTFE O-Ring:EPDM,VITON Size: DN15(1/2")~DN50(2") Standard: JIS,ANSI,DIN

Electrical Post-Mix Taps with Flow Control to maintain the fluid flow constant depsite any pressure variations. Ideal for water, soda, soft drinks, fruit juice and wine. Operates with coils of 24V / 50Hz 5W. SK approved. Electric ...

... is included in the valve. The hydraulic actuator is controled by an hydraulic power unit and an electrical panel. Accesories: Welded constrution to change from square to round section. USE Installation in water dams ...

... operating pressures and temperatures. To meet this requirement then any of the Budenberg ranges of Double Block and Bleed Valves including type 98 one piece, MV Modular type or Monoflanges can be fitted with either an ...

Pressure: 210, 315 bar
Flow rate: 57, 85 l/min

... cylinder applications where directional valves (specifically proportional valves) are sensitive to flow intensification of powering the rod side. The DCB10-MC diverts flow directly to tank and bypasses ...

Pressure: 0 psi - 125 psi
Temperature: -20 °F - 180 °F

Any TAC Push Button Valve may be operated with a choice of four TAC Air Pilot Operators. Valves are miniature 2, 3 and 4-way, and available in 10-32 UNF, 1/8 and 1/4 pipe sizes. Thread Air Pilot Operator ...

DN: 8 mm - 100 mm
Pressure: 40 bar
Temperature: -15 °C - 90 °C

... T-handle, gear handle RALLENTY. Available colours: black, red. All the valves comply with the regulation 97/23/CE and are tested 100% on pneumatic seal with electronic control.

DN: 0.5 in - 6 in
Pressure: 15 psi - 50 psi
Temperature: -20 °F - 250 °F

Clark Globe Valves 1/2"through 2"are bronze body, NPT screw sort, and are appraised for ANSI Class 250 working pressures. The working temperature ranges from 20° to 250°f. The valve stems are stainless ...

DN: 0.5 in - 12 in
Pressure: 110 psi
Temperature: 200 °F

... sanitary high performance 316 butterfly valve series stand above others in the sanitary and fine chemical fields. The valves incorporated an advanced design with characteristics unseen in other valves. ...

DN: 250 mm - 3,000 mm

The dapò valves are widely used where a regulation of the flow rate or a partialization of the air flows is required. Dapò adjustment valves with diameters from 250 mm up to 3000 mm are possible. For ...

P2/J2 series adopt unbalanced trim design, top guiding, and simple in construction. Suitable for most of service requirement. The actuator for P2/J2 series can be QLM series sliding pneumatic type or EML series electric type. P2/J2 ...

Sanitary Stainless Steel SS304 Air Pressure Relief Valve with manometer for fermentation tank Available Standard: ISO,DIN,3A,SMS Valve Type :Safety Valve Seal: Silicon/EPDM/PTFE Application: ...

Pressure: 39,200, 14,700 Pa
Flow rate: 10 l/min

A flow control valve is a type of valve that carries out control on its own where the pressure of micro flow rates suppresses any fluctuations, in order to maintain ...