MOOG control valves

Applications: Single-acting cylinders. Actuation: Flipper lever-operated. Functions: Cylinder piston “advance,” “hold” and “retract.”. Used on these pumps: PE172 and PA172.

DN: 63.5 mm
Pressure: 207, 276 bar
Flow rate: 19, 38 l/min

... FLOW REGULATOR WITH BUILT-IN PRESSURE RELIEF VALVE U.S. PATENT No. 7,063,100 The FRRV10-41F is a screw-in, cartridge type, combination valve includes a pressure compensated, non adjustable ...

DN: 50 mm - 300 mm
Temperature: -20 °C - 93 °C

The PL4200 is axial flow and electric control valve which is composed of electric actuator and the main valve. The PL4200 receives the control signal that output by the ...

DN: 25 mm - 700 mm
Pressure: 10 bar - 100 bar

... and accurate control The valve segment comes with dual bearings which results in high durability and low torque requirement The valve seat can be replaced from the outside without ...

DN: 50 mm - 200 mm
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 150 °C

... combination with the flushing chambers prevent any contact of the product with the environment. On the inside of the valve, the self-draining valve housing with single-seat, leakage chamber and balancer ...

DN: 0.5 in - 6 in
Pressure: 230 psi

Type-21/21a ball valves are corrosion resistant plastic manual true union design quarter turn valves with hyperbolic flow characteristics, low pressure drops and reliable sealing. They offer relatively ...

... downstream pressure to a re-determined limit. Wnen downstream pressure exceeds the pressure setting of the control pilot, the main valve and pilot valve close drip-tight.

DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: -30 °C - 140 °C

Control ball valve to control the flow of hot and cold water and Glykol solutions (max. 50%) in HVAC systems conjunction with a rotary actuator Technical data Valve Flow ...

DN: 50 mm
Pressure: 10 bar
Temperature: -20 °C

The sampling valve 125A is standard DN50 sampling valve by FAMAT. It is used for sampling of powders, granules, pastes and liquids under process conditions in the pharmaceutical, chemical and food industries.

DN: 0.5 in - 2 in
Pressure: 41.4 bar
Temperature: 400 °F

The NIBCO® bronze ball valve provides bubble-tight shutoff at 600 PSI. The valve is equipped with integral ISO direct mount pad for actuation and vented ball. It is pre-assembled with NIBCO® Series 2000 ...

DN: 40 mm - 600 mm
Pressure: 10, 16 bar
Temperature: 50 °C

Resilient-seated gate valve with bolted cover connection and face-to-face length of Basic Series 14 for waste-water applications. Proven design with innovative improvements, such as plastic sliding caps on the wedge, ...

DN: 0.25 in - 2 in
Pressure: 1,000 psi

AISI-316 (ASTM-A351-CF8M, EN10213 1.4408), AISI-304 (ASTM-A351-CF8, EN10213 1.4308) Full port, Threaded end, 1000PSI/ PN63, Blow-out proof stem Locking device, Oval handle, Wing handle

DN: 20 mm - 150 mm
Pressure: 6 bar
Temperature: 2 °C - 110 °C

... working Areas of use Continuous control of the supply temperature in heating systems in which a certain loss through leakage is desired. Features MH32F: 3-way valves with nominal diameters DN 20...150 MH42F: ...

DN: 15 mm - 150 mm
Pressure: 16 bar
Temperature: -40 °C - 210 °C

... PFA lined ball valves are used in a wide variety of applications in many industries The valves are ideally suited for corrosive applications, requiring reliable performance, tight shutoff, constant ...

DN: 16, 25, 40, 50 mm

Soft start valves are used to throttle the gas flow in roughing lines. They prevent turbulences in piping and containers, particulate contamination in vacuum installations, detachment of substrates by turbulences.

DN: 15 mm - 300 mm
Pressure: 4 bar - 10 bar

DN 15 - 200 PN 4 - 10 Body: EN-JL1040 Coating: Rubber lining, Halar Diaphragm valve with or without rubber coating, and different qualities of diaphragm for different media. Drip-proof closure even with suspended ...

DN: 10 mm - 300 mm
Pressure: 40 bar
Temperature: -271 °C - -30 °C

... environment, desert or cold conditions) Essential product features: - Available as globe, control or check valve and filter with stem extension - Cryogenic valve suitable for medium ...

DN: 3 mm - 8 mm

... Intake Shutoff Valve is available with three different methods of electric actuation described below. The descriptions include the available models for each version. -SVX Energize To Close Valve ...

Gate valves Gate valves are primarily used to enable or prevent a fluid medium to flow (i.e. ON / OFF control). A fully open gate valve results in no obstruction to ...

DN: 0.5 mm - 11 mm
Pressure: 0.5 bar - 10 bar
Temperature: -10 °C - 70 °C

... at least 10°C below lowest occurring ambient temperature. Materials Body: Al (anodized), seals: NBR This valve is used for the speed control of a pneumatic cylinder. The flow rate can br regulated ...

DN: 0.25 in - 2 in
Pressure: 400 psi

Threaded, 2-Piece, Std. Port, Bronze Ball Valve, 400 CWP, Sizes: 1/4" to 2" (DN 8 to DN 50)

The actuator pilots of the OS Series are especially designed for pressure control in regulators and shutoff valves, they can operate on maximum and minimum pressure, on maximum only, on minimum only.

DN: 0.5 in - 3 in

Series CSM-61 Flow Measurement Valves monitor system flow in low to medium flow rate HVAC units providing a highly accurate flow measurement. It consists of bronze body construction with bi-directional, positive shutoff ...

These AWH butterfly valves are synonymous with quality, reliability and high hygiene standards. Supplemented with a comprehensive range of accessories, these valves therefore offer the ideal solution ...

DN: 50 mm - 300 mm
Pressure: 6, 10 bar
Temperature: 10 °C - 60 °C

• Ideally suited for flow control using minimal piping space. • 100% factory tested. • Minimal pressure drop. • Low maintenance. • Resistance to many inorganic chemicals. • Regulable opening every 15º with position ...