Nilfisk-CFM separators

Flow: 9.6 m³/h - 960 m³/h

The oil and water separator is used to dry compressed air and other industrial gases. The separator ensures the fault-free and efficient operation of compressed-air and gas consumers by increasing the ...

... existing equipment • Vendor-independent connection • Other multi-track machines The SERVOFEED PF410 & PF420 are line separators for products from multi-lane production lines to a single-lane onward transport e.g. ...

The stone separator is always standing just before the washer, and is used for separating stones, so the do not enter the washing machine along with the vegetables. It is provided by letting the vegetables pass through ...

Length: 4,510 mm
Width: 2,480 mm
Weight: 2,200 kg

The Positive Type of Gravity Separator is a new gravity machine of positive pressure independently developed by our company. The structure of the equipment is optimized and the capacity have greatly improved basis on ...

Flow: 800 m³/h
Length: 1,931 mm
Width: 1,100 mm

The latest addition to the Sibilia textile sector: a pre-separator equipped with a 7.5 kW side channel pump and a Big Bag container with capacity equal to 1 m³. B75 has been designed with spinning, carding and combing ...

... LT – Lamella tank model The Lamella model LT is available in several standard sizes. The model LT is a combined lamella separator and sludge thickening device with rotating sludge scraper. The volume in the tank is greater ...

Flow: 3,000 m³/h

... to the integrated F9 class filter • Several filter stages, which ensures the last filter stage enjoys a particularly long service life • Installed in a sturdy sheet-steel housing • ...

These types of grids are used for separating any unwanted ferrous particle found in powder ed or granulated products, liquid or dry. For this reason, they are especially designed and suitable for the food or ceramics industry, etc The ...

Permanent overband magnets, OVBPs, may be used on all types of bulk products, on conveyors, vibrating lines or chutes. They are intended for : •protecting the plant against ferromagnetic parts, •refining and magnetic sorting of transported ...

Flow: 2,000 m³/h
Filtration size: 4 mm

The allflux® procedure uses fluidised bed technology for density sorting and hydraulic classification. This two-stage treatment makes it possible to process a mixture of sand and water without pre-thickening. An upflow that passes through ...

Width: 130 cm

... the need of modern industrial processes. Separator is consisted of a bowl group rotating at high speeds, the drive elements that drive the bowl and the body that carries the bowl and drive components. Separator ...

Magnetic separator is one of the most widely used and highly versatile models in the industry, and is suitable for the separation of substances with magnetic differences. Magnetic separators are widely ...

Width: 540 mm
Weight: 15, 10 kg

The pre-separators DCF 2900 c (Intellibag) and DCF 2900 L (Longopac) are ideally suited for collecting a large amount of dust combined with our smaller dust extractors, for example our models DC 1800, DC 2800 or DC 2900. ...

... constantly high level of oil separation. contec Oil Mist Separators have been awarded with the Environmental Technology Prize for 1990. Due to their very compact design, contec Oil Mist Separators ...

Length: 1,800 mm
Width: 1,400 mm
Weight: 0.3 t

The oxidized iron ore mainly includes hematite, specularite, limonite, siderite and etc. in China. All of them are weakly magnetic ores, which are characterized by large reserves, low grade and fine disseminated particle size. Besides, ...

• For 6.x formats • Convergering into one lane • Compact design Description With the very compact Weber weSORT 3000 belt converger, up to six packing lanes can be merged onto one track. Decisive added value results in particular ...

Efficient Powder Separator is the latest powder separating equipment developed by our company, the separating rate could reach 85% -90% or more. Application Air classifier is mainly used for raw meal ...

Weight: 25 kg - 87 kg

Filtering Type Oil-water separator Filtering Type Oil-water separator No power natured oil-water separator. Simply replace the filter. Filters can be replaced ...

Width: 1 m - 2 m

Lamellar packs with frame for sludge removal. They are composed of the parallel channel lamellar pack in rigid polystyrene, stabilized against UV radiation, closed in an AISI 304 containment frame; they are normally employed for the ...

Flow: 4,300, 6,500, 9,000 m³/h
Length: 1,000 mm
Width: 1,000, 1,600 mm

... allow the user quick and service-friendly access to all components. In addition, all filter systems are designed to be changed without tools. The high-quality filter system with integrated HEPA H13 filter, ...

Flow: 1 m³/h
Length: 1,100 mm
Width: 900 mm

ZK disc stack centrifuges are mainly used for the separation of solid-liquid mixtures. In theory, disc stack centrifuges can be used for materials with a solidliquid weight difference greater than 0.05g/cm³ (solid weight greater than ...

Product description: Gold Centrifugal Concentrator is based on the law of centrifugal force and it has been developed and improved on the traditional centrifuge which could save much energy.Alleviated the suction effect,heavy grains get ...

The spark separator by DENA is an accessory of the extraction system, designed to catch embers and sparks and avoid they get to the filters. We know the risk of fire in suction systems without a separator ...

... B builds classifiers by placing multiple units in a circular arrangement. The material is evenly distributed via a plate ensuring a higher throughput. AIR CLASSIFIER APPLICATION B+B builds and supplies ...