NORMA fittings

Diameter: 4 mm - 16 mm
Operating pressure: -0.1 MPa - 1 MPa

... . Various sizes of unequal union type makes it possible to handle with just one fitting, although two or more fittings are used before. It reduces the amount of fitting used and enables ...

Diameter: 3, 10, 2, 1.8, 6 mm
Operating pressure: -0.1 MPa - 1 MPa

Mini-type fitting is 40% smaller than the standard type fitting. Even the ultra-small size, tube can be easily connected or disconnected. The elliptical, ultra-small release ring is employed. Easy ...

Diameter: 3 mm - 6 mm
Operating pressure: -0.1 MPa - 0.5 MPa

Barb joint best suitable for space-saving piping. They are optimal for piping vacuum equipment. (Use with vacuum tube.) As for compression type, tube can be tightening by hands. Clean-room Package, best suitable for compact piping ...

Diameter: 0.75 in - 1.25 in

Operating pressure: 0 bar - 8 bar

It’s a Safety accessory in according with Directives ATEX 2014/34/EU and PED 2014/68/UE. The dry Break coupling is used to prevent any possible leaking during the process of transferring hazardous fluids in different fields of application ...

Diameter: 3, 4 in
Operating pressure: 8 bar - 230 bar

VAPOR RECOVERY ADAPTOR WITH IN LINE DEFLAGRATION FLAME ARRESTER It's a Protection System with ribbon coil: deflagration in-line flame arrester in according with Directive 20H/34/EU and harmonized standard EN ISO 16852:2016 - Used for ...

Diameter: 2, 3 in
Operating pressure: 0 bar - 8 bar

It's a Safety accessory in according with Directives ATEX 2014/34/EU and PED 2014/68/UE. The dry quick coupling is used to prevent any possible leaking during the process of transferring hazardous fluids in différent fields of application ...

Diameter: 2 mm - 8 mm
Operating pressure: 630, 500, 320 bar

With Oleotec hoses and fittings, pressure can be checked while hydraulic systems are at full pressure. Micro-fittings and micro-bore hoses can bear a working pressure of max. 630 bar. All fittings ...

Diameter: 40 mm - 400 mm
Operating pressure: 10 bar

Reusable aluminum coupling system, suitable to be fitted to MARMOTECH® and STEELBLAST hoses,including: • Aluminum semi-flanges according to UNI EN 1092-1 PN 10 (ex UNI 2277) • Flat black SBR gasket • Bolts, nuts ...

Diameter: 4, 6 mm
Operating pressure: 10 bar

... Corrosion-resistant - High level of gas tightness - Material of sample-contacting parts: PVDF Hose and tube screw connectors as well as fittings of series 1 to 3 out of plastic are indispensable and well-proven accessories ...

Diameter: 6 mm

... with barbed fitting for flexible tube -Barbed fitting: DN 6 -Corrosion-resistant -High level of gas tightness -Material of sample-contacting parts: PP hose nozzles, G-ISO thread, material: PP Hose ...

Diameter: 8 mm

... barbed fitting for flexible tube Thread size: G 1/8" Barbed fitting Corrosion-resistant High level of gas tightness Material of sample-contacting parts: PP hose nozzles, G-ISO thread, material: PP Hose ...

Diameter: 25 mm - 150 mm

Sanitary Stainless Steel Tee Three Way Connection: Welded, Clamped, Flanged, Threaded Standard: DIN, SMS, ISO Material: SS304 SS316L Size: DN25-150, 1"-6" Application: Dairy, Food, Beer, Beverage, Pharmaceutical and other industrial ...

Diameter: 25 mm - 150 mm

Sanitray Stainless Steel Cross Four Way Standard: DIN, SMS, ISO Connection: Flanged, Clamped, Welded, Threaded Material: SS304 or SS316L Size: DN25-150, 1"-6" Application: Dairy, Food, Beer, Beverage, Pharmaceutical and other industrial ...

Sanitary Stainless Steel Reducer Connection: Clamped, Flanged, Welded, Threaded Standard: DIN, SMS, ISO Material: SS304 or SS316L Size: DN25-150, 1"-6" Application: Dairy, Food, Beer, Beverage, Pharmaceutical and other industrial ...

... Black • - Material: Polyamide/Nylon 6.6 • - Number of Batteries: 0 • - Product Name: plastic fitting for conduit • - Product Type: Conduit Fitting with NPT Threads • - Size: NC 34mm

Diameter: 12 mm
Operating pressure: 1 bar

Product details Thread: Metric, PG, G(PF), NPT Materials: UL approved and halogen-free nylon PA66(Flammability UL94V-2) for A.C.F parts. EPDM rubber for B. D parts. (Accept to order super rubber: high temperature resistance, ...

Materials: UL approved Nylon PA66 ( Flammability UL94V-2)Working temperature: -40℃-100℃, can up to 120℃ in short time. Features:Strong tensile strength, Fast plugging and unloading, improved the installation efficiency.Can be used for ...

Diameter: 16, 12, 13.7 mm
Operating pressure: -0.99 bar - 20 bar

... connection style fitting is a perfect solution for all applications requiring the Cleaning in Place (C.I.P) sanitation procedure. The assembly and disassembly of a Clamp fitting is very easy and does ...

Diameter: 6, 8, 10 mm
Operating pressure: -0.99 bar - 20 bar

... connection style fitting is a perfect solution for all applications requiring the Cleaning in Place (C.I.P) sanitation procedure. The assembly and disassembly of a Clamp fitting is very easy and does ...

Diameter: 6, 8, 10 mm
Operating pressure: -0.99 bar - 25 bar

Diameter: 10 mm - 100 mm

... large range of these Fixings & Fittings for Adjustable Feet in stock ready for free or next day delivery, along with free samples which can be sent out if you'd like to test suitability before placing an order. These ...

Diameter: 28 mm - 70 mm

Pipe connectors Suitable for realizing watertight, current leading connections between high current pipes. Hexagonal design is standard. But on request also in octagon or as groove nut design deliverable.

GVF Impianti wear-resistant segmented bend CM series is composed by three interchangeable sectors with rotary split flange and a gasket interposed. The rotary split flanges permit to make path and direction diversions, removing the ...

GVF Impianti’s wear-resistant squared bend CSQ series is produced in carbonitrided NiHard cast iron, in order to give it an high hardness and wear resistance. The bend’s special design permits the material to deposit and create a protective ...

Diameter: 12.7 mm

 Material: SS-316  Body Diameter: 3/8” OD  For crimping or brazing to probe  NON-Threaded TRANSITION 1) ATLG125SS * - 3/8″ OD X 1/8″ 2) ATLG1250SS * - 3/8″ OD X 1/4″ 3) ATLG188SS * - 3/8″ OD X 3/16″ 4) ATLG375SS * - 3/8″ ...

... a tube. Solid Hex Plugs Solid Hex Plugs are also for customers that take standard fitting and weld or thread non standard sizes on one end or make a custom fitting while embedding an RTD or thermocouple ...

... a tube. Solid Hex Plugs Solid Hex Plugs are also for customers that take standard fitting and weld or thread non standard sizes on one end or make a custom fitting while embedding an RTD or thermocouple ...

Diameter: 2, 2.5, 3, 4 in
Operating pressure: 40 bar

Swivel joint – direct-flangeswivel Product characteristics steel (42CrMo4) or stainless steel (1.4571) PTFE-Compound-seal built-in ball guiding tracks similar to ball bearings swiveling, rotating movements with ...

Diameter: 2 in - 32 in
Operating pressure: 40 bar

Swivel joint – direct-flangeswivel, Product characteristics steel (42CrMo4) or stainless steel (1.4571) PTFE-Compound-seal built-in ball guiding tracks similar to ball bearings swiveling, rotating movements with ...

Diameter: 0.25 in - 2 in
Operating pressure: 350, 100 psi

Swivel joint – heavy version with thread connections, nominal diameters G1/4″ – G2″ Product characteristics steel (42CrMo4) or stainless steel (1.4571) PTFE-Compound-seal built-in ball guiding tracks similar to ball ...

Diameter: 3 mm

Diameter: 1 mm - 8 mm

Diameter: 1.5 mm - 8 mm

Diameter: 10 mm - 54.5 mm

Connectors FLEXAquick for ROHRflex corrugated plastic tubings Plastic connector, quick-type, straight, plug-type connection, conically sealed Material PA plastics Temperature -40°C ... +120°C Protection class [acc. to EN 60529]: IP 66

Diameter: 10 mm - 56 mm

Metal connector, safety-type straight, outer thread metric or PG incl. ferrule [brass/plastic], sealing [TPE] or brass thrust collar and O-ring [NBR] Material: nickel-plated brass Temperature range: -40°C ... +125°C -40°C ... ...

Diameter: 10 mm - 56 mm

Metal connector, safety-type straight, metric outer thread, strain relief, incl. ferrule, sealing made of TPE or brass thrust collar [MSD] and O-ring Material: nickel-plated brass Temperature range: -40°C ... +100°C Prot. rate ...

Diameter: 3 mm - 14 mm
Operating pressure: 16 bar

... structure – Hexagon socket for easy assembly Operating temperature : -20°C bis +70°C -20°C bis +80°C For fittings with PVC seal For fittings with NBR O-rings Vacuum : max 98% Materials ...

Diameter: 4 mm - 14 mm
Operating pressure: 16 bar

... structure – Hexagon socket for easy assembly Operating temperature -20°C bis +70°C -20°C bis +80°C For fittings with PVC seal For fittings with NBR O-rings Vacuum max 98% Materials NBR ...

Diameter: 4 mm - 14 mm
Operating pressure: 16 bar

... structure – Hexagon socket for easy assembly Operating temperature -20°C bis +70°C -20°C bis +80°C For fittings with PVC seal For fittings with NBR O-rings Vacuum max 98% Materials NBR ...

Diameter: 0.25 in - 2 in
Operating pressure: 10 bar

Port Refer below technical data sheet (Available BSP) Media Air, Water, Oil, Gas Upto 10 bar Temperature 85" C (Chilled water & high température available on request) RPM 1000 RPM High-Perfomance Bearings & Seals Dual Connection Available

Diameter: 4 mm - 16 mm

Compact & Captivating Design Air tight sealing of tubes Durable & Maintenance free Pneumatic cylinders (ail types) Pneumatic control & circuit panels Ail Threaded nipples has plastic portion that is capable of rotating 360° Compatible ...

Diameter: 4 mm - 16 mm

Compact & Captivating Design Air tight sealing of tubes Durable & Maintenance free Pneumatic cylinders (ail types) Pneumatic control & circuit panels Ail Threaded nipples has plastic portion that is capable of rotating 360° Compatible ...

Diameter: 1.6 mm - 11.5 mm
Operating pressure: 0 bar - 7,000 bar

MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...

Diameter: 3.2 mm - 17.5 mm
Operating pressure: 0 bar - 1,400 bar

MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...

Diameter: 3 mm - 20 mm
Operating pressure: 1,050 bar

MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...

Operating pressure: 100 psi

Barbed fittings with Orifice Insert These barbed fittings feature an integral precision orifice. SPECIFICATIONS ACCURACY: See “Precision Orifices” MATERIAL: FDA Approved Polysulfone/Polycarbonate MAX. ...

Operating pressure: 100 psi

Barbed fittings with Orifice Insert Barbed fittings with Orifice Insert These barbed fittings feature an integral precision orifice. Specifications ACCURACY: See “Precision Orifices” MATERIAL: ...

Completely raparaible and disassemblable - Pressurized and depressurized connectable - Suitable for fluids and gases - Functional parts - high strength stainless steel - Mounting into individual contour - Flow optimized (real diameter) - ...

MECHANISM / NIPPLE, ND 6/10 UP TO 250 BAR These coupling elements can only be mechanically coupled and are used to transfer liquid and gaseous media. - Pressurized and depressurized connectable - Suitable for fluids and gases - ...