OKS gear greases

Operating temperature: -50 °C - 120 °C

... Relubrication with a grease gun on to the grease nipples or with an automatic lubrication system. Relubrication intervals and amount to be defined acc. to the service conditions. If the removal of the ...

Operating temperature: -10 °C - 160 °C

... Relubrication with a grease gun on to the grease nipples or with an automatic lubrication system. Relubrication intervals and amount to be defined acc. to the service conditions. If the removal of the ...

Operating temperature: -50 °C - 130 °C
Pour point: -50 °C
Flash point: 200 °C

... free inner housing space. Observe the instructions of the bearing or machine manufacturer. Relubrication with a grease gun through the grease nipples or with an automatic lubrication system.

Operating temperature: -15 °C - 160 °C

OKS 427 is a gear and bearing grease at high temperatures and high loads. Areas of application Lubrication of highly stressed and relatively slowly running gears where due to leakage ...

Operating temperature: -30 °C - 120 °C
Pour point: -45 °C
Flash point: 200 °C

... conditions. If the removal of the old grease is not possible the amount of grease has to be limited to avoid excess lubrication of the gear. At longer relubrication intervals a complete ...

Operating temperature: -25 °C - 150 °C

... viscosity at (40°C): 1,700 mm²/s (base oil) Applications Clean the lubricating points well for optimal effect. Apply the grease evenly and thinly to the functional surfaces with a brush, spatula, etc. Avoid excesses. ...

Operating temperature: -30 °C - 220 °C

OKS 490 is a gear lubrication grease for open and half open gears. Areas of application For highest contact pressure and high circumferential speed, e.g. for rotary kilns, ball ...

Operating temperature: -30 °C - 100 °C

... an open gear spray for dry lubrication of slowly-turning, open pinion gears and steel cables etc. subjected to high pressures, dust or corrosive influences, such as outdoor weathering. Areas of application Lubrication ...