OKS long-life greases

Operating temperature: -20 °C - 130 °C
Pour point: -20 °C
Flash point: 200 °C

... high-pressure long-life grease for lubrication points subjected to pressure or impacts also under outdoor exposure. Areas of application For harsh operating conditions Advantages ...

Operating temperature: -25 °C - 150 °C

OKS 418 is an economic hot bearing grease for lubrication of friction and rolling bearings at higher temperatures. Areas of application Grease lubrication of plain and rolling bearings at high temperatures, ...

Operating temperature: -10 °C - 160 °C

... Relubrication with a grease gun on to the grease nipples or with an automatic lubrication system. Relubrication intervals and amount to be defined acc. to the service conditions. If the removal of the ...

Operating temperature: -40 °C - 140 °C
Pour point: 268 °C
Flash point: -65 °C

... at the lubrication nipples by grease gun or by automatic lubrication system. Assess the lubrication frequency and quantity on basis of service conditions. If old grease cannot be removed, restrict the ...

Operating temperature: -50 °C - 130 °C
Pour point: -50 °C
Flash point: 200 °C

... synthetic grease for long-term lubrication of machine elements. Advantages and benefits Good low-temperature behaviour, stress absorbing ability and smooth run at high speeds Good plastic compatibility The ...

Operating temperature: -15 °C - 160 °C

OKS 427 is a gear and bearing grease at high temperatures and high loads. Areas of application Lubrication of highly stressed and relatively slowly running gears where due to leakage a grease must ...

Operating temperature: -30 °C - 120 °C
Pour point: -45 °C
Flash point: 200 °C

... conditions. If the removal of the old grease is not possible the amount of grease has to be limited to avoid excess lubrication of the gear. At longer relubrication intervals a complete exchange of the ...

Operating temperature: -20 °C - 120 °C
Pour point: -20 °C
Flash point: 200 °C

... Relubrication with a grease gun through the grease nipples or with an automatic lubrication system. Relubrication intervals and amount to be defined acc. to the service conditions. If the removal of the ...

Operating temperature: -40 °C - 150 °C

OKS 464 is a special grease for long-term lubrication of rolling and friction bearings for avoiding electrostatic charging. Areas of application Special grease for the long-term ...

Operating temperature: -40 °C - 200 °C

... with suitable lubricants. Caution: Plastic based on silicone, such as silicone rubber can be attacked by silicone grease. Silicone grease may not be used at sliding points under pure oxygen influence. Industries No ...