OKS low-temperature lubricants

Operating temperature: -50 °C - 130 °C
Pour point: -50 °C
Flash point: 200 °C

OKS 425 is a synthetic grease for long-term lubrication of machine elements. Advantages and benefits Good low-temperature behaviour, stress absorbing ability and smooth run at high speeds Good ...

Operating temperature: -30 °C - 120 °C
Pour point: -45 °C
Flash point: 200 °C

... the amount of grease has to be limited to avoid excess lubrication of the gear. At longer relubrication intervals a complete exchange of the old grease is recommended. Mix with appropriate lubricants only.

Operating temperature: -45 °C - 120 °C
Pour point: -70 °C
Flash point: 200 °C

... synthetic low-temperature grease with NSF H1 certification for food processing technology. Areas of application Grease lubrication of bearings with low coasting ...

Operating temperature: -45 °C - 120 °C

... bearings with minimal gearing play and high speeds, at low temperatures as well as low coasting torques. Areas of application For joints, propeller shafts and chains when grease ...

Operating temperature: -60 °C - 120 °C

... at low temperatures and high speeds. Areas of application Grease lubrication of plain and roller bearings with low bearing play as well as bearings with low ...

Operating temperature: -73 °C - 200 °C

OKS 1133 is a low-temperature silicone grease. Areas of application For example, electric motors, drives, control systems and telecommunication and navigation systems under arctic conditions, Bowden ...

Operating temperature: -60 °C - 135 °C
Pour point: -65 °C
Flash point: 160 °C

... extremyl low temperatures to -60°C. Areas of application Fully synthetic oil for use at permanently low temperatures in all areas of the food processing industry, ...

Operating temperature: -60 °C - 135 °C
Pour point: -65 °C
Flash point: 160 °C

... oil for food processing technology that can also be used at extremly low temperatures to -60°C. Areas of application Fully synthetic oil for use at permanently low temperatures ...

Operating temperature: -40 °C - 135 °C
Pour point: -45 °C
Flash point: 240 °C

... sufficient amount of lubricant with a brush, drip oiler, by immersion or using a suitable automatic lubrication system. Assess the lubrication frequency and quantity on basis of service ...

Operating temperature: -45 °C - 135 °C
Pour point: -50 °C
Flash point: 230 °C

... sufficient amount of lubricant with a brush, drip oiler, by immersion or using a suitable automatic lubrication system. Assess the lubrication frequency and quantity on basis of service ...