Temperature: 0 °C - 650 °C
SUPERHEATED STEAM UNIONS Up to 650 °C operating temperature Available as weld-on or screw-in version For pressures up to PN 100 Metric or Whitworth thread Available for tube diameters from DN3 up to DN40 Temperature-resistant up ...
Temperature: -80 °C - 400 °C
MANUAL BLOCKING VALVES AND NON-RETURN VALVES For medium flow regulation Robust, durable version Delivery complete with DILO connecting parts Temperature range of non-return valves ...
DN: 6.35 mm
Pressure: 10 bar
SOLENOID VALVE FOR COMPRESSED AIR, PUMP CONTROL. NO, Solenoid valve for compressed air. Brass and NBR. 24 V DC. Normally open type N.O. 1
SAMOA Industrial, S.A.
DN: 6.35 mm
AIR LINE SHUTOFF VALVE, NEEDLE AIR VALVE, BSP (FF) Air valve, BSP (FF). Needle air valve.
SAMOA Industrial, S.A.
DN: 6.35 mm
Pressure: 65 bar
Low and medium pressure 1/4" BSP (FF), quarter turn valve.
SAMOA Industrial, S.A.
Ball Valves & Check Valves for CNG refuelling - Ball Valves - Tank Head Valves - Air Torque Actuated Ball Valves - Sandwich Valves - ...
DN: 15 mm - 250 mm
... Another important feature of the valve is that it is easy to adapt to the multi-channel structure, so that a valve can obtain two, three, or even four different flow channels.This simplifies piping design, ...
Tengxuan
DN: 40 mm - 300 mm
Pressure: 15, 11, 24, 17.6 bar
... parts of the gate valve are called the gate plate. The gate plate moves up and down and is perpendicular to the direction of fluid. The gate valve can only be fully opened and closed, not used for regulating ...
Tengxuan
Ball valve is evolved from the plug valve, its opening and closing pieces as a ball, using the ball around the axis of the stem rotation 90 degrees to achieve the purpose of opening and closing. The ...
Tengxuan
Eye bath valve assembly for tank showers Stainless steel eye bath valve assembly, complete with Y strainer with fine mesh filter basket. • 1/2 inch ball valve with hygienic flushing ...
Hughes Safety Showers
Main valve assembly suitable for the 350L emergency tank shower from Hughes. 11/2 inch single union safeblock grey UPVC valve with solvent cement sockets. • WRAS approved • ISO EN 1452-3, NF and KIW ...
Hughes Safety Showers
Main valve assembly suitable for the 1200L and 1500L emergency tank shower from Hughes. 11/2 inch single union safeblock grey UPVC valve with solvent cement sockets. • WRAS approved • ISO EN 1452-3, ...
Hughes Safety Showers
... Sample Valve (5157A Model): Ideal for general sampling, the standard sample valve can be quickly installed on the pipe line or container. The valve clamps into position. This enables ...
The Model 472A Spray Valve is an air-open/spring-closed spray valve available in brass or stainless steel. The valve features metering adjustment of output volume and a choice of air-cap ...
Pressure: 16 bar
Temperature: -20 °C - 40 °C
Outlet valve for gas cartridges • Adjuster for metallic gas cartridges • according to DIN EN 417:2012 • outside thread M 10 x 1 • CE-0085CQ0255
DN: 0.5, 0.25, 0.75 in
Temperature: -20 °C - 50 °C
Opening / closing system: The most frequent application of these valves is in installations where the flow is interrupted regularly. Valve design: Needle valve Maximum nominal pressure: ...
DN: 19 mm - 24.5 mm
Pressure: 25 bar
Temperature: -20 °C - 50 °C
Opening/closing system: The most frequent application of this valve is in installations where the flow is interrupted regularly. Valves for pressure gauges
DN: 20 mm
... accessory for valves manufactured by Aplisens. It is constructed using 316 stainless steel. This needle valve operates with a medium temperature. Order codes for VM-1 are 1/M, 1/G, 1/graphite and 1/oxygen. ...
DN: 12, 14 mm
One kind of fitting accessories is a needle valve VM-1-R7R with 316ss materials used. This product can operate in medium temperature and it works on pressures. It has no vent port and is packed by graphite. It can be ...
Pressure: 100 bar
Temperature: 80 °C
The ball valve is manufactured from H17N14M2 grade material, which is equivalent to 316 stainless steel. Maximum temperatures of the medium should not be more than 80 degrees Celsius. The maximum working pressure is 100 ...
Valves play an important role throughout the pharmaceutical, food, chemical and allied industries. Valves play an important role throughout the pharmaceutical, food, chemical and allied industries. ...
DN: 50 mm - 100 mm
Pressure: 0 bar - 200 bar
Temperature: -20 °C - 100 °C
Needle valve Flow regulation for liquids and gases Operation: Seat and plug of the needle valve NV are conical shaped. By lifting or lowering the plug, the available cross-section can be increased ...
Pressure: 30, 8 bar
Temperature: 15 °C - 40 °C
... multi-directional valve is particularly suited for liquid handling applications. The control system is compatible with SyrDos™ syringe pumps. The robust stainless steel housing makes the multi-directional valve ...
DN: 2 mm - 17.5 mm
Pressure: 1,400 bar
Temperature: 10 °C - 80 °C
... aforesaid valves allow not only to fill, but also to carry out the delivery under pressure with nominal diameters being double compared with the valves that are normally on the market for the pressure ...
DN: 2 mm - 8 mm
Pressure: 1,400 bar
Temperature: -20 °C - 80 °C
... avoid contamination. Specific selection of metallic materials to avoid hydrogen embrittlement. Special hard treatments for Valve stem Leakage test on seat and packing with nitrogen at maximum operating pressure.
DN: 0.5 in - 3 in
Pressure: 8.5, 7 bar
Temperature: 0 °C - 50 °C
... sure seating of ball - Simple design allows easy access to the valve when replacing seals becomes necessary - Special retaining collar makes valve mounting quick and easy
DN: 2 in - 12 in
Pressure: 200 psi
• Design Standard: AWWA C515 • Nominal Pressure: 200PSI • Flange Standard: ASME/ANSI B16.1 Class 125 or ASME/ANSI B16.42 Class 150 or BS EN1092-2 PN16 or GB/T9113.1 • Epoxy resin coating both inside & outside the body • It could be ...
DN: 0.25 in - 2 in
Pressure: 63 bar
Temperature: -25 °C - 180 °C
2 Pcs full bore ball valve construction: stainless steel CF 8M S (316). Investment casting. Gas threaded ends din 2999. Seats and seals: PTFE + 15% GF o´ring stem: viton. Manually operated by handle ...
DN: 0.5 in - 2 in
Temperature: -25 °C - 180 °C
3 Ways ball valve reduced bore. “T” bore construction: AISI 316; four seats PTFE + GF body and stem seats: PTFE o´ring stem: viton. Gas threaded ends DIN 2999. PN 63. Manually operated by handle with ...
DN: 0.25 in - 2 in
Temperature: -30 °C - 180 °C
3 Ways ball valve reduced bore. “L” bore construction: AISI 316; four seats PTFE + GF body and stem seats: PTF o´ring stem: viton. Gas threaded ends DIN 2999. PN 63. Direct assembling S/ISO 5211. Manually operated ...
DN: 0.25 in - 0.5 in
Pressure: 0 bar - 3 bar
Temperature: 0 °C - 60 °C
... in fluoropolymer valves have allowed us to provide you with an entrapment free, full flow-through component. These high-purity valves are available in numerous configuration alternatives in both 2 way ...
DN: 0.25 in - 1 in
This ball valve has a compact main body size and takes up little space for installation.
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 90 °C
... thread, as well as flange adapters. Slanted seat valves (free flow valves) Valve casing and top made of stainless steel, gunmetal or silicon bronze, valve seat made ...
DN: 12 mm - 20 mm
Pressure: 7.3 psi - 65.3 psi
Flow rate: 0.8 l/h - 3 l/h
... the pressure lose is slight and irrigtion precision is high. 6.Water saved can amount to 30-40%,and compared with the conventional irrrigation mode. Basic characteristics: 1.The different wall thicknesses are ...
DaYu Water-saving Group Co.,Ltd.
DN: 0.78 mm - 1.32 mm
Pressure: 0 bar - 7 bar
M Series Solenoid Valve is a sub-miniature 2- or 3-way valve that implements efficient power conservation. In battery-powered applications, the M Series can be designed for extreme low wattage conditions. ...
DN: 50 mm - 600 mm
Pressure: 10 bar - 16 bar
Temperature: -40 °C - 200 °C
GAR-SEAL® Butterfly Valve for Control, Throttling and Shut-off Duties GAR-SEAL® valves are used extensively where corrosive, abrasive, and toxic media need to be reliably controlled. They are typically ...
Valves and Subplates For inline applications, use the 61642 Valve mounted on a 61646 Subplate. This set-up is also recommended for use with high volume air-powered hydraulic pumps in StayLock applications. ...
VACUUM ADJUSTEMENT VALVE 1" Applications Vacuum level adjusting
SAPELEM
Please specify:
Help us improve:
remaining