ORIENTAL MOTOR cylinders

Stroke : 8 mm - 20 mm
Force: 5 kN - 32 kN

... actuation. When workpieces are clamped onto a machine tool table, the hollow rod cylinder can be fitted over the clamp bolt instead of the nut. The hollow rod cylinders can be used for push or pull applications. Completely ...

Stroke : 8 mm - 25 mm
Force: 2 kN - 155.5 kN

Cylinder barrel from steel, burnished. Piston and piston rod case hardened and ground. Wiper at piston rod. Piston rod with internal thread. Oil supply via threaded port. Universal mounting by means of mounting holes. ...

Stroke : 25.5 mm - 51 mm
Force: 5.9 kN - 17.5 kN

Cylinder barrel from steel, hardened and burnished. Piston rod hardened and chrome plated. Piston rod with internal thread. Wiper at piston rod. Oil supply via threaded port. Universal pull cylinder ...

Stroke : 50, 7, 15, 25 mm
Force: 100, 170 N

LINEAR CYLINDERS Proven technology We have more than 20 years of proven reliability, which ensures uninterrupted production for you Constant drive force Equal force and travel time when retracting and extending ...

Stroke : 15 mm - 300 mm
Force: 80 N - 950 N

LINEAR CYLINDERS Large locating flange The large mounting surface simplifies your design and allows secure attachment of follow-on tools Dampened end position By using PowerStop shock absorbers, you can gently move ...

Stroke : 50, 100 mm
Force: 600, 720 N

► Hoseless air passage Eliminates undefined interference contours and wear-prone hoses and increases the safety of your application in the process ► Dampened end position By using PowerStop shock absorbers, you can gently move up ...

Stroke : 20 mm - 100 mm
Pressure: 500, 350 bar
Force: 17.1 kN - 109.2 kN

B1.554 Block cylinders with aluminium or bronze housing for adjustable magnetic sensors double acting, max. operating pressure 350 bar or 500 bar

Stroke : 8 mm - 10 mm
Force: 8.5 kN - 40 kN

B1.372 Low-block clamping cylinders B1.372 Low-block clamping cylinders single acting with spring return max. operating pressure 500 bar max. clamping force: 8.5 .. 40 kN stroke: 8 .. 10 mm

Stroke : 0.5 mm - 1 mm
Force: 16 kN - 100 kN

B1.494 Spring clamping cylinders B1.494 Spring clamping cylinders pulling with hydraulic return max. operating pressure see unclamping pressure h = 1 mm max. clamping force: 16 ..100 kN unclamping ...

Stroke : 40 mm - 20,000 mm
Force: 0.3 kN - 60 kN
Torque: 0.14 Nm - 265.39 Nm

... Series Servo Electric Cylinder with advanced servo cylinder structure design and imported parts assembly, ensure that Lim-Tec servo electric cylinder in the domestic leading linear motion.Rolled ...

Force: 2 kN - 20 kN

... hour. Temperature range : -15 ℃ to 50 ℃. Protection grade: IP44, IP55. ZBT parallel synchronous belt ball screw electric cylinder Thrust range： 0.2 to 2 tons Max speed：200mm/s Max stroke：2m Accessories: brake motor, ...

Stroke : 500 mm - 3,000 mm
Force: 600 N - 150,000 N
Torque: 0.53 Nm - 2,331 Nm

LIM-TEC IMB Series Servo Electric Cylinder with advanced servo cylinder structure design and imported parts assembly, ensure that Lim-Tec servo electric cylinder in the domestic leading ...

Stroke : 1 mm - 100 mm
Force: 500 N
Speed: 38 mm/s

... fixture components, buildings or machines must be moved by remote control. Two features are responsible for the electric cylinder BGR 010's success: These drives have been specially designed for confined spaces and ...

Stroke : 20 mm - 130 mm
Force: 750 N
Speed: 50 mm/s

Linear actuator for extreme conditions The LD75 is specially designed for use in extreme conditions. Ambient temperatures from -40° to 85° Celsius* can do as little harm as the jet of a high-pressure cleaner or the strong vibrations ...

Stroke : 15 mm - 300 mm
Force: 1,000 N
Speed: 100 mm/s

The electric cylinders of the 015 series can be flexibly configured, which makes them perfect for a variety of industrial applications. Infinitely variable stroke lengths up to 300 mm, various overall lengths and a ...

Stroke : 25 mm - 2,700 mm
Bore: 32 mm - 100 mm
Pressure: 0 bar - 10 bar

... The new ISO 15552 cylinders of the Airwork CF series represent the new generation of ISO pneumatic cylinders that, thanks to the use of innovative materials and a state-of-the-art construction philosophy, ...

Stroke : 25 mm - 2,700 mm
Bore: 32 mm - 100 mm
Pressure: 0 bar - 10 bar

... The new ISO 15552 cylinders of the Airwork CF series represent the new generation of ISO pneumatic cylinders that, thanks to the use of innovative materials and a state-of-the-art construction philosophy, ...

Stroke : 10 mm - 320 mm
Bore: 8 mm - 25 mm
Force: 30 N - 295 N

... used in several applications. Both aluminum heads are fixed to the stainless steel tube by a rolling process. ISO 6432 cylinders can be realized with double or single effect (pushing or pulling), magnetic, with bumper ...

Stroke : 100 mm - 1,000 mm
Force: 15,000, 10,000 N
Speed: 0 mm/s - 1,250 mm/s

New electric cylinder for heavy-duty applications RK Rose+Krieger has expanded its range of electric cylinders with the introduction of an additional electromechanical heavy-duty cylinder: ...

Stroke : 50 mm
Force: 0 N - 300 N
Speed: 0.55 in/s

The electric cylinders of the component M9 are low-cost linear drives for small powers and feature compactness and space-saving dimensions.

Stroke : 40 mm - 100 mm
Force: 50 N - 500 N
Speed: 0.8 in/s

010 Electric cylinder The compact electric cylinders of the component 010 are especially designed for demanding situations. They are equipped with high-quality, non-ferrous motors, withstand extreme ...

Stroke : 25 mm - 360 mm
Pressure: 700 bar
Force: 45 kN - 929 kN

... additional attachments. Single acting cylinders with spring return hydraulic cylinder in high pressure. Pushing force from 5 to 100 tons with a stroke range from 25 mm to 360 mm. Extremely versatile ...

Stroke : 50 mm
Force: 111.3 kN - 929.1 kN

... splined and removable head. • Custom made Hydraulic cylinders high pressure can be manufactured on customer request. Compact hydraulic cylinders - Low Height Cylinders Compact hydraulic ...

Stroke : 6, 10, 14, 15 mm
Force: 43.1 kN - 1,496.8 kN

... eccentric load absorption. • Custom made Hydraulic cylinders high pressure can be manufactured on customer request. Extra flat cylinders - Low height hydraulic cylinder Extra Flat ...

Force: 0 kN - 30 kN
Speed: 0 mm/min - 30,000 mm/min

Electromechanical Servo Testing Actuators Industries • - Universal • - Components Test load • - 1 kN - 100 kN Type of test • - Tensile • - Compression • - Components • - Fatigue Applications • - Flexible range of application • ...

Stroke : 10 mm - 100 mm
Pressure: 350 bar
Force: 3 kN - 130 kN

Single or double acting, the linear cylinder is mainly used for holding a workpiece against its isostatic references before sarting the clamping process. This range can also be used for internal movements in plastic injection ...

Pressure: 500, 600 bar

... enable cylinder drain. •Flat or tilt (optional) saddle. •Wiper seal to prevent from external pollution •M18x1.5 oil port. Different types of cylinders available : •SLS cylinders ...

Pressure: 700 bar

... Different types of cylinders available : •QSR cylinders : single acting, spring return •QER cylinders : single acting, with lock nut, spring return •QCR cylinders ...

Stroke : max 4000.0 mm
Pressure: max 200.0 bar
Speed: max 0.5 m/s

• Piston Ø 40-100 mm • Modern seals and guide elements • Simple replacement of wear parts through rugged screw system • Subsequent retrofitting and revaluation possible through unit construction system • Rod screw thread, non-toleranced ...

Stroke : 600 mm
Force: 500 N - 15,500 N
Max acceleration: 12 m/s²

... in ISO1552 pneumatic Cylinder dimensions as standard, and many different stepper or Servo motors can be connected according to the desired speed and force. Fasteners used in pneumatic cylinders can ...

Stroke : 600 mm
Force: 1,000 N - 40,000 N
Max acceleration: 12 m/s²

... in ISO1552 pneumatic Cylinder dimensions as standard, and many different stepper or Servo motors can be connected according to the desired speed and force. Fasteners used in pneumatic cylinders can ...

Stroke : 1,000 mm
Force: 2,750 N - 17,000 N
Max acceleration: 10 m/s²

... in ISO1552 pneumatic Cylinder dimensions as standard, and many different stepper or Servo motors can be connected according to the desired speed and force. Fasteners used in pneumatic cylinders can ...

Stroke : 10 mm - 3,000 mm
Force: 1,347, 4,642, 361, 722 kN
Torque: 97.44, 2,436, 4,872 Nm

... The lead of Planetary Roller Electric Cylinder can be designed to be smaller than that of Ball Screw Electric Cylinder. The lead of planetary roller electric cylinder (the length of ...

Stroke : 10 mm - 3,000 mm
Force: 651, 180.5, 361 kN
Torque: 1,218, 2,436, 48.72 Nm

... roller screw Electric Cylinder the maximum rated speed reaches 17.5-35 mm/s even more, effective stroke 10-3000mm, maximum rated thrust 180.5-361KN even more, parallel type. Features Application The Planetary Roller ...

Stroke : 10 mm - 3,000 mm
Force: 72, 144, 241 kN
Torque: 19.48, 487, 974 Nm

... roller screw Electric Cylinder the maximum rated speed reaches 17.5-35 mm/s even more, effective stroke 10-3000mm, maximum rated thrust 72-144KN even more,parallel type. Features Application The Planetary Roller ...

Stroke : 50 mm - 200 mm
Pressure: 250 bar
Force: 12 kN

Cylinder tube: ST52,3 DIN 2393 ISO H9 Cylinder rod: UNI C45 SAE1045 – Cromo 25 Micron +/- 5. For production of the cylinders raw materials and components are exclusively from the ...

Stroke : 50 mm
Pressure: 250 bar
Force: max 20.0 kN

• - Cylinder tube: ST52,3 DIN 2393 ISO H9 • - Cylinder rod: UNI C45 SAE1045 – Cromo 25 Micron +/- 5. For production of the cylinders raw materials and components are exclusively from ...

Stroke : 50 mm - 500 mm
Pressure: 250 bar
Force: 20 kN

• - Cylinder tube: ST52,3 DIN 2393 ISO H9 • - Cylinder rod: UNI C45 SAE1045 – Cromo 25 Micron +/- 5. For production of the cylinders raw materials and components are exclusively from ...

Stroke : 26 mm - 361 mm

• All our cylinders are designed for a maximum hydraulic pressure of 700 bar (70 MPa). • The cylinders are fitted with coupling (female part) designed for high flows. All cylinders can ...

Stroke : 26 mm - 361 mm

... piston guide which makes the cylinders stable and durable. • Hard chromed piston rod and cylinder tube coated with ”nitrokarb”. • The interior of the cylinder roller polished to provide ...

Stroke : 38 mm - 62 mm

• Capacity from 10-100 ton. • Compact universal cylinders with return spring.

Stroke : 75 mm - 185 mm
Bore: 65, 42, 45, 55, 55.5 mm
Pressure: 0 bar - 100 bar

The lifting cylinders of the T Series are designed for the agricultural and construction vehicles Among the hydraulic actuators of our production range there is the T Series of plunger lifting cylinders, ...

Stroke : 0 mm - 300 mm
Bore: 40 mm - 75 mm
Pressure: 120 bar

... range of fork steering cylinders for agricultural vehicles, earth moving vehicles and forklifts. The hydraulic actuators automate the entire driving process, by minimizing the human interaction with the machine. The ...

Stroke : 0 mm - 140 mm
Bore: 60, 80, 50 mm
Pressure: 200 bar

... hydraulic lifting cylinders with front hitch. Ideal for agricultural vehicles, earthmoving and forklifts. The hydraulic actuators automate the entire driving process, by minimizing the human interaction with the machine. ...

Stroke : 5 mm - 80 mm
Bore: 16 mm - 100 mm

CU series short stroke cylinders. According to project U.N.I.T.O.P. - RUP/7 Bores from 16 to 100mm, with magnetic piston single and double acting with end stroke elastic cushions.

Stroke : 10 mm - 300 mm
Bore: 12, 16, 20, 25 mm

CK Series (Norma ISO 6432) Miniature cylinders single and double acting Available in standard and magnetic versions.Pneumatic end of stroke cushions for the bores 20 and 25.

Stroke : 10 mm - 300 mm
Bore: 12, 16, 20, 25 mm

CKP Series Miniature cylinders double ended piston rod. Available in standard and magnetic versions. Pneumatic end of stroke cushions for the gores 20 and 25.