Parker Stratoflex hoses

Temperature: -62 °C - 260 °C
Delivered length: 25'00", 100'00", 50'00"

Sani-Tech® STHT®-C is an ultra-pure biopharmaceutical-grade tubing. This platinum-cured silicone tubing resists extreme temperatures, ozone, radiation, moisture, compression sets and chemical attack. Sani-Tech® STHT®-C silicone tubing ...

Inner diameter: 15 mm - 4,000 mm
Pressure: 0 bar - 64 bar

We manufacture GRP/FRP Pipes, Fittings, Ducts for Chemical, Power Plants, Desalination, Water and Oil and Gas Plants. Design standards that we follow are: - DIN 16965 / 16966 AWWA C950 ASTM 2310 / 2992 / 2996 BS 7159 ...

Inner diameter: 2.5, 4, 5, 6.5, 8 mm
Outer diameter: 4, 6, 8, 10, 12 mm
Pressure: -100,000, 0.8 Pa

... suitable for piping of vacuum equipment. •Shear marks are provided every 500mm. It is convenient for cutting reference. •The UB tube is color-rich. It can be assembled according to the purpose , or use the same color ...

Inner diameter: 70, 45, 25 mm
Pressure: 17, 20, 30 bar
Delivered length: 60 m

... polyethylene. CHARACTERISTICS Its design and weight make it an easy hose to roll, transport and unfold. Its good flexibility, even at low temperatures, avoids problems of flow loss and hose management. Its ...

Inner diameter: 25 mm - 800 mm
Pressure: 0.01 bar - 0.6 bar
Temperature: -40 °C - 100 °C

Light weight and very flexible Polyurethane ducting, flame retardant Material: Polyether-Polyurethane, clear Single Length: 10 and 15 m Temperature Resistance: – 40° up to + 100° C Applications: Suction ...

Inner diameter: 5.4 mm - 22.2 mm
Outer diameter: 11.2 mm - 30.5 mm
Pressure: 52, 69 bar

... vehicles where abrasive protection is required. This hose is sold by the metre. Fluid applications - Oil, Coolant & Water Compatible fittings 236, 336, 2776 & 936 hose finishers.

Inner diameter: 20 mm
Outer diameter: 27 mm
Pressure: 14 bar

Hose 1 1⁄4"-LP-20-01500 14 BAR is one of the Hyva Hoses with the highest safety standards. This hose has a Maximum Working Pressure of 14 bar, with an inner diameter of 1 1⁄4 and a length ...

Borg & Beck is an established world-wide supplier of premium quality automotive components to the vehicle aftermarket, with over 100 years history of engineering excellence and OE pedigree. Some of the most important products on a commercial ...

Outer diameter: 110 mm - 710 mm
Temperature: -50 °C - 110 °C
Delivered length: 34 m - 2,000 m

... extreme operating conditions of temperature, corrosion and wear). Light weight and flexible pipe with good natural bend radius. Easy to install (Pex pipe can be laid uphill ...

With tubes for medical application ElringKlinger Engineered Plastics is a development partner to many international leading medical equipment manufacturers. We offer sophisticated and efficient solutions for medical, laboratory, pharmaceutical ...

Descripcion: Manguera específica para el trasvase de AdBlue.

Inner diameter: 19, 6.3, 12.5, 25, 10 mm
Pressure: 0 bar - 15 bar
Temperature: -20 °C - 60 °C

... rubber hose. Benefits Made of oil resistant rubber Temperature range -20⁰C - +60⁰C Made of oil resistant SBR&NBR rubber with a synthetic reinforcement, comes in coil of 50 m. working pressure 1.5 Mpa or up ...

Inner diameter: 6.3 mm - 25 mm
Outer diameter: 13 mm - 34.5 mm
Pressure: 24, 21, 28, 20 bar

This Disca-made apparatus possesses an operating temperature range of -40 to 100 degrees Celsius. Its internal tube has been manufactured out of specialized NBR rubber materials tolerant to hydraulic oils, while its external ...

Inner diameter: 0.3 mm - 700 mm
Outer diameter: 0.6 mm - 950 mm

PTFE Hose/Pipe Dechengwang PTFE tubes are in extruded and molded type, and are available in virgin PTFE, modified PTFE and PTFE Compounds with the widest range of metric size. Up to diameter 260 mm we can supply standard ...

Pressure: 16, 25, 40 bar

PTFE (virgin or conductive) Different lining thicknesses and flange designs on request. Flange design: fix-fix fix-loose loose-loose Other pressure rates: PN 16 PN 25 PN 40 Material: carbon steel and stainless ...

Inner diameter: 0.25 in
Pressure: 50, 110 psi
Temperature: 0 °F - 170 °F

Material: Acetal Copolymer Colors: Blue, Orange, Black, White, Grey Compatibility: Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No: Chlorine, Acids, Ammonium ...

Inner diameter: 9.3 mm - 52 mm
Outer diameter: 19.5 mm - 68.1 mm
Pressure: 21 MPa - 112 MPa

This section covers hose for use with petroleum base hydraulic fluids within a temperature range of -40°C-+121°C(-40°F+250°F). This hose shall consist of an inner tube of oil resistant ...

Inner diameter: 400, 315, 250 mm
Outer diameter: 315, 400 mm

Inner diameter: 15 mm
Pressure: 20 bar
Temperature: -40 °C - 90 °C

High quality anti-static hose made from two rubber coats: red and black one. Exterior red coat ensures resistance to abrasion, contamination and extreme operating conditions. Internal black coat is reinforced and ensures ...

Inner diameter: 5 mm - 102 mm
Outer diameter: 11.2 mm - 115 mm
Pressure: 30 bar - 400 bar

... hydraulic hoses consists of many layers. The types and functions of these layers are as follows; 1. Inner Rubber Layer It is produced by pulling synthetic rubber paste. It ensures that the fluid passing through ...

If permanent and, above all, rigid connections are to be realized in hydraulics, piping is used. In our Product of the Month September, we show you the optimization of a customer-specific pipeline. The starting point was a curved pipeline ...

Inner diameter: 6 mm - 51 mm
Outer diameter: 13.4 mm - 67.3 mm
Pressure: 580 psi - 3,270 psi

The application of the hydraulic hose: hydraulic hose The high pressure hose is mainly used for Mine hydraulic support ,oilfield exploitation ,object construction ,lifting transport ,metallurgic ...

Temperature: -190 °C - 260 °C

In some critical applications, like X-ray and printing, colour identification is required. Polyfluor Plastics can supply PTFE tubing or marked PTFE tubing in a wide variety of colours by adding a dry pigment to the natural PTFE tubing. ...

Inner diameter: 3.5 mm - 25.6 mm
Outer diameter: 8.5 mm - 33.6 mm
Pressure: 70 bar - 250 bar

... environments having high humidity and saline levels. Applications: Hoses of the OL7 Marine Series have been created for high pressure hydraulic applications in MARINE environments; this type of hose ...

Inner diameter: 15 mm - 150 mm

... Construction smooth PTFE tube with stainless steel braid SS 304 Technical data Vacuum: not suitable Flexible PTFE hose low convoluted, with Stainless Steel helix and high ...