Pico encapsulated transformers

This linear current transformer series, allow to obtain an AC or DC voltage on output without other transducer. This solution reduce the cost and space of the installation. Mechanical dimension and primary current ...

Primary voltage: 230 V
Secondary voltage: 4 V - 12 V

Bell transformer ZTR-15-12Designated for general use – e.g. as home bells supply, door locks supplyDESCRIPTION Short-circuit-proof, doubled output terminalsTECHNICAL PARAMETERS Input voltage: AC 230 V Output ...

Primary voltage: 230 V

Execution in accordance to VDE 0570 / EN 61558 Prepared for units to protective class II Protective type IP 00 Thermal class E Nominal ambient temperature ta 40°C Input voltage: 230V Output voltage: up to 42V Frequency: 50/60Hz Impregnation Test ...

Output power kVA: 0.025 kVA - 5 kVA
Primary voltage: 100 V - 600 V
Secondary voltage: 12 V - 600 V

... additional accredited bodies. Our transformers offer good access to the four-hole fixing, touch-proof terminals and full varnish impregnation to protect against humidity. • Control Transformer : ...

Electric power: 0.005 kVA - 0.03 kVA
Primary voltage: 5 V - 3,200 V

The LV current transformer series manufactured by ENTES, is a set of models that are specially made to transform primary currents by a ratio to its secondary side with 0 degree phase difference. The network's HV side ...

SES Current Transformers (CT) are used to ensure that electrical systems do not overload and for monitoring large loads by the using a metering instrument. Selection of accurate and reliable CTs are very crucial. It has ...

Transformers of models EI and EE are applied in a wide range and offer ahigh working frequency and wide range of working voltages plus strong output power and good ability in thermal stability。They have been widely used ...

Primary current: 15, 20, 5, 10 A
Secondary current: 2 mA - 20 mA
Frequency: 50, 60 Hz

CURRENT TRANSFORMERS FOR ELECTRONIC ENERGY METERS FEATURES: -Adopted high permeability core, high accuracy, excellent linear performance; -Anti-combustion plastics case; -Encapsulated with epoxy resin ...

Electric power: 0.0005 kVA - 0.06 kVA
Primary voltage: 230, 115 V
Secondary voltage: 6 V - 48 V

... wide range of encapsulated transformers. Due to their construction and for being vacuum encapsulated with self-extinguish epoxy resin, they have an additional insulation that improves ...

Electric power: 0.144, 0.096, 0.06, 0.12 kVA
Secondary voltage: 1.2, 0.8, 0.5 V
Primary current: 120, 0.6 A

... high allowable load impedance and high accuracy enable the CTS transformer to be rigidly integrated with a meter testing system. Once integrated, it can handle both self-contained and transformer connected ...

Primary voltage: 1,200, 720 V
Primary current: 40 A - 7,500 A
Secondary current: 1, 5 A

... current transformer range, these measuring transformers convert high current into lower nominal current value, thus making it possible to use instruments and relays with standardised values of rated current. Part ...

Electric power: 0.04 W - 5 W
Primary voltage: 230, 400 V
Secondary voltage: 24 V - 230 V

... isolating / isolation transformers, which are protected against direct contact. Products in the LH-series are designed with maximum versatility in every transformer’s functions and technical features. ...

Output power kVA: 0.03 kVA - 2.5 kVA
Primary voltage: 230 V - 400 V
Secondary voltage: 24 V - 230 V

... SINGLE PHASE ISOLATING TRANSFORMERS IP00 Modern and economical make of general purpose isolating and/or safety transformers for building into installations and industrial or power engineering devices. ...

Electric power: 7.5 kVA - 440 kVA
Primary voltage: 460 V - 575 V
Secondary voltage: 133 V - 460 V

... SCR (Silicon Control Rectifier) variable speed motor drive applications, a transformer is needed to magnetically isolate the incoming line from the motor drive. The transformer must also provide a voltage ...

Primary voltage: 110 V - 240 V
Secondary voltage: 24, 48, 110, 220 V
Secondary current: 10 A - 10,000 A

Internal isolation transformer at input, Full controlled conventional rectifier, Smart control and high reliability with DSP (Digital Signal Processor)... GENERAL SPECIFICATIONS Internal isolation transformer ...

Primary current: 400 A - 5,000 A
Secondary current: 5 A

... Multiplexer Toroidal Current Transformers are mostly used in cases where all measuring conductors cannot be passed through a toroidal current transformer. CT-1S provides a vectorial sum by using X/5 ...

... case current transformers are used if high currents are to be recorded and further processed. The line to be measured (conductor rail or wire) is fed through the window opening and forms the primary circuit for the plug-on ...

Economical Low leakage inductance and interwinding capacitance Fast rise time: 3nSec typical Low profile 16-pin DIP (14-pin available) Surface mount design available Choice of turns ratio, 1:1 or 2:1

Electric power: 0.0006 kVA - 0.0032 kVA
Primary voltage: 24 V - 440 V
Secondary voltage: 6 V - 24 V

... minimal sizes availlable test certifications to ENEC 10-, VDE, UL- and CSA-regulations absolutely short-circuit-proof vaccum encapsulated, bobbin with dual chamber windings temperature class ta 40C/F and ta 70C/F hight ...

Secondary voltage: 5 V - 120 V

20 output voltages to choose from (5 - 120VAC R.M.S.) Six VA size models available from - .5 to 24 VA Vertical mount, split bobbin design. 1.2, 4.4, 10, 24 VA models are non-concentric wound. 0.5 and 1 VA are both concentric wound. Low ...

Primary voltage: 275, 500, 200, 550 V
Secondary voltage: 275, 500, 200, 550 V
Primary current: 40,000, 15,000 A

HIGH ATTENUATION ISOLATION TRANSFORMERSWITH OVERVOLTAGE PROTECTION IREM Isolation Transformers of the RS series are characterized by: the high attenuation of common mode disturbances; the attenuation of overvoltages ...

Output power kVA: 10 kVA
Primary voltage: 600 V
Secondary voltage: 600 V

PhaseSingle FrequencyBased on customers' requirement Capacity10KVA Max. Voltage600V Max. Inductance RangeBased on customers' requirement Insulation LevelClass A / B / F

Primary current: 5,000 A

GIS current transformers type JK GIS are used in GIS applications. Features • Single- or three-phase current transformers • Free choice of mounting position • Mounted outside or inside ...

The current transformer is part of the control circuit. It is used to measure the current so that the temperature controller can determine the heatsealing band temperature: PEX-W5 standard version with additional UL ...

Output power kVA: 3,150 kVA
Primary voltage: 36 kV

ELETTROMECCANICA COLOMBO manufactures distribution oil transformers , low voltage/low voltage(LV/LV) medium voltage/low voltage(MV/LV) and medium voltage/medium voltage (MV/MV) up 3,15 MVA and 36 KV. The transformers ...