Pico transformers

Electric power: 30 W - 1,600 W
Secondary voltage: 30 V - 900 V

... ) or when the load is of inductive kind (inductive voltage transformers). The system duty cycle can be freely chosen and is insured by adding radiators or forced oil-cooling to the transformers. These ...

Electric power: 3,600, 7,000, 2,000 W
Primary voltage: 115, 230 V
Secondary voltage: 115, 230 V

Indispensable in professional marine energy systems. It prevents electrolytic corrosion and above all serves as a device to guarantee a safe electric system. Toroidal wound technology for quietness and high efficiency. Soft start circuitry ...

Electric power: 150 W
Primary voltage: 1,500, 2,500, 4,000, 4,500 V

Characteristics Power over Ethernet up to 150 Watts and speeds up to 1 Gbit/s Available in SMT Compliant with standards: IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at and upcoming IEEE 802.3bt Applications Suitable for industrial ...

Primary voltage: 240, 120 V
Secondary voltage: 18 V - 24 V

... Class 2 Signaling Transformers are easy to install, low voltage power sources for residential, commercial, and industrial uses. Mounts in a standard 1/2" (13mm) knockout or surface mounts using the provided foot mounts. ...

Primary current: 5 A - 450 A

Current transformer with built-in transducers ø 35mm Primary current field-selectable 9 programmable ranges Output 0..,20mA - 4..,20mA - 0...10V d.c. 4-wire technology, a.c. auxiliary supply

Primary voltage: 10, 20, 35 kV

Overview SC (B) 10/11 epoxy cast dry-type transformer is a dry-type transformer with strong mechanical strength, electrical strength, and good heat-resistance performance. It is made of F class epoxy ...

... II is implemented, a power transformer with reinforced insulation can be used for energy storage in accordance with DIN EN 61 558-2-16. If no secure insulation is required, a cost-effective design for the power transformer ...

Output power kVA: 0.06 kVA
Primary voltage: 230 V
Secondary current: 0 A - 12 A

Transformer with 230V primary Secondary 0-12V AC/60 VA for intermittent use. The transformer is fitted with PTC internal protection. Dimensions: 71.7 x 90 x 62 mm (4 DIN modules).

The head type IOSK oil paper insulated current transformers follows the current IEC and IEEE/ANSI standards. It is outstanding in controlling insulation stress using fine graded bushing. The advantages of using fine graded ...

Split-Core Current Transformers Split-Core Current Transformers (CTs) are designed for applications where it is difficult or uneconomical to open the primary conductor to install a solid-core-type current ...

Electric power: 30,000 kVA - 1,000,000 kVA

The generator step up transformer, manufactured by Avantha, is suitable for producing distribution transformer that ranges from 30 mVA up to 1000 mVa ranges with a maximum 765 KV for both voltage sides ...

Electric power: 2,500 kVA - 1,200,000 kVA
Primary voltage: 345 kV

Recognized as one of the largest manufacturers of power transformers in the United States, SPX Waukesha designs, manufactures and tests its transformers at the companys modern operating facilities in ...

Electric power: 0.01 kVA - 31.5 kVA

The TR 21 CONTROL Transformers is a control and safety or seclude single-phase transformers. This device employs the principle of mutual induction to proselytize variations of current in a primary circuit ...

Electric power: 3,060, 2,570, 490 kVA
Primary voltage: 25,000 V
Secondary voltage: 2,570 V

EMU Type ATM9 Main Transformer Type：ATM9 Usage: Type CRH2 EMU with speed of 200KM/h and above Main technical features Mode: Single-phase， shell-type， non-pressure sealed type; Mode of rectification: Input ...

Primary current: 0.06 A - 85 A
Frequency: 0.1 Hz - 85 Hz

... to 25 kA, the LILCO® series of PMK’s current transformers enables precision high bandwidth AC current measurements, which are required for a broad range of measurement applications. The current transformers ...

Secondary voltage: 1, 5 V
Primary current: 1, 5 A

... outdoor waterproof current transformers are applicable for AC power system 35kV and measurement of current of power supply equipment below 10KV also can be used for microcomputer protection. This type of current transformer ...

Primary current: 5 A - 1,000 A

- Donut and Terminal Style that Reduce High AC Current Signals to 5 AC Amperes - Model 186 Reduces High AC Current Signals to 10 AC Volts

Primary current: 5 A

Model :CMCT102 Rated Input Current :5A Rated Output Current :2.5mA Turns Ratio :2000:1 Phase Angle Error :≤20＇（Input 1A，sampling resistor 100Ω） Linear Range :0~20A（sampling resistor 100Ω） Mounting :Ø5.0mm

Primary current: 160 A

Characteristics:Hand hold type, leading wire output, audio plug connector(or customized), transient voltage suppressor built in. Application: used for the current measuring, monitoring and protecting of AC motor, lighting equipment ...

This linear current transformer series, allow to obtain an AC or DC voltage on output without other transducer. This solution reduce the cost and space of the installation. Mechanical dimension and primary current ...

Primary current: 5 A

- nominal secondary current 5 A - rated burden 5 VA - working range 1 … 200 % of nominal current - uncertainty of ratio ± 0.001 % - uncertainty of phase ± 0.05 Min. - overload protection with indication

Primary voltage: 230 V
Secondary voltage: 4 V - 12 V

Bell transformer ZTR-15-12Designated for general use – e.g. as home bells supply, door locks supplyDESCRIPTION Short-circuit-proof, doubled output terminalsTECHNICAL PARAMETERS Input voltage: AC 230 V Output ...

Output power kVA: 0.16 kVA - 16 kVA
Frequency: 50 Hz - 60 Hz

... manufacture JSG series three phase transformer with voltage between 160VA and 16KVA.The figure and installation size have be standardized and can be used together with 4AP series of Siemenfs. JSG series transformer ...

Secondary voltage: 65 V - 230 V
Primary current: 6.3, 3.15 A

The SEA Series is a type of transformer in the Mf-net program manufactured by Vostermans Ventilation. The SEA series includes the SEA 3.15 and SEA 6.3. These transformers can be controlled manually, in ...

Output power kVA: 0.063 kVA - 20 kVA
Primary voltage: 230 V
Secondary voltage: 24 V