... industry’s first multiprotocol I/O device for PROFINET, EtherNet/IP and EtherCAT protocols Connect more field devices in a daisy-chain with the industry’s only I/O module powerful ...
HIRSCHMANN
... points are short-circuit proof and completely isolated from the CANbus. P317 modules may be mixed on the same bus, with other types in the Trio CAN I/O range. The Trio CANbus I/O expansion ...
Trio Motion Technology
... -specific diagnostics Individually readable state of the outputs Inexpensive digital outputs ASi-5 self-configuring I/O module, in IP67, with 8 x M12 sockets, up to 16 digital inputs, up to 16 digital ...
Bihl+Wiedemann GmbH
GF 30% Polyamid 8(12)-32 VDC 1S Li-on Battery -40C +80C 1x IMU Sensor Up to 1 Frequency Input Up to 4 Current Inputs Up to 4 Resistive Inputs Up to 4 High-Side Outputs Up to 4 Low-Side Outputs Up to 1 Analog Output Up to 2 ...
Makersan
GF 30% Polyamid 8(12)-32 VDC 1S Li-on Battery -40C +80C 1x IMU Sensor Up to 1 Frequency Input Up to 4 Current Inputs Up to 4 Resistive Inputs Up to 4 High-Side Outputs Up to 4 Low-Side Outputs Up to 1 Analog Output Up to 2 ...
Makersan
GF 30% Polyamid 5(9)-12 VDC -40C +80C 1S Li-on Battery Up to 1 Frequency Input Up to 4 Current Inputs Up to 4 Resistive Inputs Up to 4 High-Side Outputs Up to 4 Low-Side Outputs Up to 1 Analog Output Up to 2 Solid State Relays
Makersan
Port: 1 RJ45/2 RJ45 Interface: PCIe x1 Form Factor: M.2 B-M key 22mm x 42mm (0.87" x 1.65")
DFI
Port: 1 RJ45/2 RJ45 Interface: PCIe x1 Form Factor: M.2 B-M key 22mm x 42mm (0.87" x 1.65")
DFI
Mini PCIe to M.2 Modules Port: 1 M.2 2242 M key/ 1 M.2 2230 E key Interface: PCIe, SATA, USB (based on motherboards input) Form Factor: Mini PCIe for both full and half sizes
DFI
... and status LED. Module for din-rail mounting (4 modules wide)
... contact 4 digital analog outputs Module for din-rail mounting (9 modules wide)
Input/output module with 4 digital inputs and one LED output Specifications Power in: 12-24Vdc Main Network: RS485 4 digital inputs 1 LED output series resistor of 56 Ω towards mass Wire Section for Power and ...
Digital mix modules (inputs and outputs) for the modular fieldbus IO system TB20. The scope of delivery already includes the appropriate front connector for the cabling and a base module. ...
Helmholz GmbH & Co. KG
The QE-8DI is a slave module with n°8 digital inputs. Thanks to the presence of the RS485 serial port it can perform advanced functions such as I/O module with Modbus RTU protocol. The ...
qeed
... and/or contacting hazardous voltages. Each SCM5B392 module set is made up of two modules: a voltage input/current output module and a current input/voltage output module. The ...
... channels have user configurable default output states which are set up on power up or module reset. In addition to performing standard discrete I/O, the channels can be configured to perform seven special ...
... Discrete output channels have user configurable default output states which are set up on power up or module reset. In addition to performing standard discrete I/O, the channels can be configured to perform ...
8 Digital Inputs, 8 Digital Outputs and an RS485 Gateway Port Control any input or output from TTL to high voltage high current industrial devices Factory floor process control and automation, Integrated DIN rail mount Supports simple ...
Brainboxes
Grayhill offers I/O modules in the industry standard sizes of mini, standard and G5. Grayhill also offers its unique Open-Line style I/O module that offers two input/output ...
The MB-DIO4/2-IP 24 V module in IP65 housing with 4 digital inputs, as well as 2 relay outputs, is suitable for the inclusion of decentralized signal contacts and the control of decentralized switching tasks. As signal ...
METZ CONNECT
The MB-DIO2/1-IP 24 V module in IP65 housing with 2 digital inputs, as well as 1 relay output, is suitable for the inclusion of decentralized signal contacts and the control of decentralized switching tasks. As signal ...
METZ CONNECT
The BACnet module BMT-Multi I/0 is a compact and rapidly to install solution to connect digital and analog signals from the actor and sensor level directly to a control unit in building automation via BACnet MS/TP protocol. ...
METZ CONNECT
The xtremeBLOCK CANopen module combines many different I/O signal configurations. It offers a total of 12 inputs, eight of which can be parameterized as analog. The remaining four digital inputs can also ...
The xtremeDB -1 (pronounced: "dash one") CANopen module combines many different I/O signal configurations. It offers a total of eight inputs, up to four of which can be parameterized in analog mode. Two ...
The xtremeDB -1 (pronounced: "dash one") SAE J1939 module combines many different I/O signal configurations. It offers a total of eight inputs, up to four of which can be parameterized in analog. Two ...
As a communication interface independent of the field bus, the sensors, actuators and I/O supporting the IO-Link protocol are IO-Link slave devices, which greatly improves the reliability ...
Sentinel Electronics
PROFINET is an open industrial Ethernet communication protocol, designed to collect and transmit data in industrial systems, and can realize real-time data transmission and reception. It is a real-time industrial Ethernet. Since profinet ...
Sentinel Electronics
PROFINET is an open industrial Ethernet communication protocol, designed to collect and transmit data in industrial systems, and can realize real-time data transmission and reception. It is a real-time industrial Ethernet. Since profinet ...
Sentinel Electronics
To expand the I/O capability of certain RTCU products an MODBUS compatible I/O module can be connected to the product and configured using the I/O Expansion configuration ...
LOGICIO
The Ethernet system with 16 digital I/O MSX-E1516 has 16 digital inputs/outputs with status LEDs, 24 V, and 1 digital 24 V trigger input. The inputs and outputs can be parameterised as paris of inputs our outputs and ...
ADDI-DATA
... programmable Rresistor module NXI-5100 supports LAN bus control. Its optional range of resistance is 0Ω~11.11MΩ. Resistance accuracy can be up to 0.1%. For different applications, the flexible design architecture supports ...
The SPC-SDIO-S0808SPK Intelligent Distributed IO is an affordable smart IO device developed by SonnePower. It features 1 CAN bus, 8 IO resources, and supports high-level voltage signal ...
Hunan SonnePower International Co., Ltd.
SPM-SDIO-MD1 high-power IO module is equipped with 1 CAN bus, 1 DIH, 2 PWM outputs, and 3 H-bridge outputs. Additionally, this product features high protection level, high integration, and high response ...
Hunan SonnePower International Co., Ltd.
... ports have open circuit detection function for easy fault diagnosis Input and Output Module Applications SonnePower Industrial Automation: Utilize the module for precise control and monitoring in ...
Hunan SonnePower International Co., Ltd.
... , and thermo-sensor modules. • Specifically designed for use with IMO i3 and XGB PLC • Analogue and digital I/O modules • Up to 16-bit resolution • Configurable inputs inc. DC Voltage, ...
... , and thermo-sensor modules. • Specifically designed for use with IMO i3 and XGB PLC • Analogue and digital I/O modules • Up to 16-bit resolution • Configurable inputs inc. DC Voltage, ...
... thermo-sensor modules. • Specifically designed for use with IMO i3 and XGB PLC • Analogue and digital I/O modules • Up to 16-bit resolution • Configurable inputs inc. DC Voltage, ...
... the modules in parallel, to provide a more efficient and flexible installation. ■ Main features: - Modules expanding limit up to 31 units. - Multi-module power supply: when several ...
... the modules in parallel, to provide a more efficient and flexible installation. ■ Main features: - Modules expanding limit up to 31 units. - Multi-module power supply: when several ...
... the modules in parallel, to provide a more efficient and flexible installation. ■ Main features: - Modules expanding limit up to 31 units. - Multi-module power supply: when several ...
... Full population of discrete cards yields 64 I/O in 2 RU (rack units); full population of analog input cards yields 32 analog inputs. See Figure 1 below for front indications and rear connections on Orion I/O. 16-point ...
... to 76,800 bit/s. The I/O modules are optimally designed for interaction with the BACnet router UBR-01 | Mk II. By using the router, the modules can then be connected to IT networks. Technical ...
... to 76,800 bit/s. The I/O modules are optimally designed for interaction with the BACnet router UBR-01 | Mk II. By using the router, the modules can then be connected to IT networks. Technical ...
The slide-in module for analogue input is designed to record voltages of -10 to +10 V and current signals of 0/4 to 20 mA. Laboratory apparatus, such as thermostats, mixers or measuring sensors, can be connected to the ...
HiTec Zang GmbH
This slide-in module controls laboratory apparatus with analogue voltage or current inputs for control and regulation purposes. The module uses four 6-pin Tuchel sockets according to NAMUR standard ...
HiTec Zang GmbH
This module enables up to 4 Pt100 temperature sensors to be connected. Due to the four-wire technology the length of the wire has no effect on the accuracy of measurement. The resolution is greater than 0.01 °C. The ...
HiTec Zang GmbH
... As an IIoT I/O module, ATOP’s IO5202 Series is a compact solution for connecting digital and analog devices and sensors, enabling you to monitor, acquire and process data from remote ...
... other devices. PD 802 is used with the BM 103 base module that provides the power supply connection and connection for all the communication interfaces. The device can be fixed to the base module ...
PROCES-DATA A/S
Please specify:
Help us improve:
remaining