PLYMOVENT extraction fans

Bathroom Wall Exhaust Suction Fan 品牌: kanasi FOB Price: $4.49-6.04 MOQ: 2

Air flow: 950 m³/h - 6,200 m³/h

... portable radial fans are meant for use in air-supply- or extraction ventilation systems of rooms and workplaces. They can be applied, both for general ventilation and local exhausts (technological extraction). ...

Air flow: 7,800 m³/h - 22,000 m³/h

... stainless or galvanised steel sheet is available on request. The fan is not provided with any flanges; P-905 connector and K-905 flange can be used to install the fan into an air duct. The RBH fans ...

Air flow: 8 m³/min - 250 m³/min

... Admitted fluid: Very dusty air and materials Maximum working temperature: +80°C (+150°C *) For suction of very dusty air with various suspended materials. The fans included in this series are largely ...

High performance, powerful suction High performance, powerful suction fans work behind the filter and provide with up to 84% efficiency for optimal suction performance ...

Air flow: 0 m³/h - 170,000 m³/h

ROOF EXTRACT UNIT Type THE (Extraction) and THS (Blowing) Explosive atmospheres - Industrial ventilation - Tertiary ventilation Axial fan with base and weather cowl. Version TH-EX for ATEX. Diameter ...

Air flow: 1,140 ft³/min

... impeller wheel are made out of aluminum casting. The rigid fan housing and trolley are finished in powder coat paint. A variety of different suction and pressure hoses are available. The exhaust fan ...

... exhaust fan for air suction at temperatures up to 100/110°C. The high temperature roof exhaust fan was created to satisfy the need of manufacturers to install a fan ...

Air flow: 0 m³/h - 840 m³/h
Rotational speed: 2,550 rpm - 3,300 rpm
Noise level: 69, 52, 60, 70, 73 dB

... • Mounting and filter change without tools • Same mounting cut-outs like filter fans LV • Low depth inside the cabinet • Combination possibilities with all filter fans types LV 400 – 800 • Housings ...

Air flow: 1,325 m³/h - 100,000 m³/h

VENCO Axial Smoke Exhaust Fans are fire resistant fans used in car park and subway ventilation projects. The best matching fan is supplied in the wide range by selecting several blade- ...

Air flow: 150 m³/h - 13,500 m³/h
Diameter: 125 mm - 400 mm

The Colasit CMVeco radial fan has been produced since 2009 and is a proven and absolutely reliable plastic fan. The CMVeco is available in various materials and drive concepts, and can be supplied for ...

Diameter: 60 in

... 60″ Exhaust Fans are our largest exhaust fan, exhausting a large volume of air. The 60″ fan is 3 HP only, 3 phase motor only, Direct Drive, rated for 40000 CFM. Measurements: 60″ blade ...

Air flow: 14 m³/h - 4,199 m³/h
Rotational speed: 970 rpm - 2,980 rpm

... -PRESSURE FAN. HIGH EFFICIENCY IMPELLER WITH SPECIAL PROFILE BLADES. BELT DRIVE. Use: the centrifugal fans of this high efficiency series are suitable for drying plants tyres, transportation systems, ...

Air flow: 7,445 m³/h - 45,000 m³/h
Rotational speed: 1,440, 960 rpm

... frequency converter 20-50 Hz. • The temperature in the fan motor is monitored by PTC thermistors. The PTC thermistors must be connected to a release system, that permanently disconnects the fan from ...

Air flow: 1,000 m³/h - 220,000 m³/h

... air can be within the scope of the flow channel width of uniform distribution. • No2.8~6 fan is A transmission; No8~12 fan is C and D type transmission No16~20 fan adopts B type transmission. • ...

Air flow: 1,200 m³/h - 22,800 m³/h

SERIES AXIAL EXHAUST FAN FA/FTA series single/three phase axial-flow exhaust fans are suitable for dehydration drying of the edible fungi, woods, medical materials, tobacco, seafood etc. In the factory, ...

Air flow: 2,600 m³/h - 41,000 m³/h

The U/ET series axial fans are designed to extract stale air, fumes and vapours at temperatures of up to a maximum 50°C. They are used in all industrial plants where large volumes of air are to be removed without using ...

Air flow: 1,300 m³/h - 1,950 m³/h
Rotational speed: 3,000 rpm

... VR-108 fan outlet must be connected to exhaust ducting. - OPTION: When used with ECO:D wall-mounted filter unit, VR-108 fan can return the filtered-air back into the hall. - One VR-108 exhaust fan ...

Air flow: 6,400 m³/h - 37,000 m³/h

... capacity Mobile Axial fans are designed for short time period ventilation needings within the bigger volume areas It is easily movable from a workplace to another one by means of its wheeled transporter. The Units are ...

... where it’s needed – to cool employees, clear smoke and fumes or keep pesky insects away. Thoroughly tested in the world’s only fan research and development laboratory, Sweat Bee will stand up to the most rigorous of industrial ...

Air flow: 8,000 m³/h

Exhaust Fan Roof exhaust fan, is provide to control of efficient air for healty storage in flat or pitched roofs. It is used to unload humidty air from silo. It should be run together with aeration ...

Air flow: 195 m³/h - 250 m³/h

- Different filter mats for dust collection - LV series offers low shape and quick mounting - EMC versions are available - Further colors available on request

Air flow: 0 ft³/min - 29,000 ft³/min

The TDF-VP Velocity Plume Power Venter is an innovative plume dilution fan that delivers a powerful vertical plume but also dilutes the flue gas exhaust 100% or more. That means dilution of exhaust condensate, less visible ...

Air flow: 28,050 m³/h

... CHARACTERISTICS MULTI-APPLICATION BATFAN 2 is the most versatile battery-powered fan on the market. It can be used for PPV (offensive, defensive, combined), blowing, extraction and it can be transformed ...

Air flow: 50 m³/h - 2,500 m³/h