PNR welding system nozzles

Orifice diameter: 0.375 in - 0.75 in
Flow: 0.78 l/min - 223 l/min
Pressure: 0.5 bar - 10 bar

... flat fan nozzle tips are usually mounted onto a pipe by means of a welding nipple and secured in place with a retaining nut. Therefore, they can be easily replaced and their dovetail ...

Orifice diameter: 0.7 mm - 5.2 mm
Flow: 4.5 l/min - 268 l/min
Pressure: 80 bar - 400 bar

The modern design of these nozzle offers the same advantage as the full size HW nozzles. In addition it makes possible to use a smaller pitch between the nozzles allowing for a higher ...

Orifice diameter: 0.7 mm - 5.2 mm
Flow: 4.5 l/min - 268 l/min
Pressure: 80 bar - 400 bar

... path of the nozzle orifice has been redesigned completely to reduce energy losses caused as a result of turbulence, the elimination of all sharp cross section changes has resulted in a significant increase in water velocity ...

Orifice diameter: 0.7 mm - 5.2 mm
Flow: 4.5 l/min - 268 l/min
Pressure: 80 bar - 400 bar

The modern design of these nozzle offers the convenience of a more rational alignment system, with a copper seal used between nipple and nozzle tip. The nozzle efficiency ...

Orifice diameter: 0.7 mm - 5.2 mm
Flow: 4.5 l/min - 268 l/min
Pressure: 80 bar - 400 bar

... path leading to the nozzle orifice has been completely redesigned to reduce energy losses caused by turbulence, all sharp cross section changes have been eliminated resulting in a significant increase in water velocity ...

Orifice diameter: 0.7 mm - 2.5 mm
Flow: 4.5 l/min - 55.9 l/min
Pressure: 80 bar - 400 bar

... among descaling nozzles can be very narrow. In these cases the use of micro-descaling tips avoids the installation of nipples and nozzles or rings onto the spray manifold, which would ...