Flow rate: 500 us gal/min
... piping, and the headache of maintaining a liquid filled line, ScrubSeal acts as a check valve to allow drainage of scrubber sump liquid through the overflow valve while maintaining required vessel vacuum ...
DN: 400 mm - 2,000 mm
It mainly serves to adjust or stop the waste water level inside the channel. Turning the handwheel placed on the upper part of the penstock to the right or to the left, the shield of the penstock rises or lowers, changing in this way ...
DN: 50 mm - 2,000 mm
Wafer style, uni-directional knife gate valve. One piece integral cast body with guides to support the gate and seating wedges. High flow rates with low pressure drops. USE This knife gate valve is ...
C.M.O.
DN: 0.25 in - 4 in
Pressure: 10,000 psi
Temperature: -54 °C - 538 °C
... of lightweight Monoflange isolation valves that are ideally suited to a wide range of instrumentation applications via standard flanged pressure take-off points. The compact design incorporates the Isolation valve ...
Budenberg
DN: 2.5 in - 16 in
... operating nut or optional hand wheel. The non-rising stem flange x flange gate valves are available in 2 ½” – 16” and the non-rising stem push–on and mechanical joint gate valves ...
DN: 6 mm - 80 mm
Pressure: 40 bar - 100 bar
Temperature: -20 °C - 130 °C
... T-handle, square cap, underground adaptor, lockable sealing cap from 3/4”. Available colours: black, red, yellow. All the valves comply with the regulation 97/23/CE and are tested 100% on pneumatic seal with electronic control.
EFFEBI
DN: 0.5 in - 3 in
Pressure: 125 psi
Temperature: -40 °F - 275 °F
The Series 22 Dia-Cam Pinch Valve is a high flow capacity pinch valve with a flow-thru design to handle fluids like slurries. It only has one wet part, the PTFE-lined Diaphragm Spool.The valve ...
DN: 0.25 in - 4 in
Pressure: 1,000 psi
Temperature: -50 °F - 450 °F
... 304 stainless steel handle and nuts with a high quality carbon steel body. *Not for direct mount actuation. Manual Carbon Steel Ball Valve •1/4" - 4" (inches) sizes available •Steam rating: 150 ...
Valtorc
Pressure: 0 Pa - 2,000 Pa
Temperature: 0 °C - 1,000 °C
As for industrial round valves, square valves are also designed taking into account the pressures and temperatures of use. The industrial square valves do not have a standard dimension, ...
Rimor
DN: 50 mm - 500 mm
Pressure: 1.6 bar - 26 bar
Temperature: -196 °C - 650 °C
Bottom angle control valve Type Bottom Angle Control Valve Size DN50x25~DN500x450 / 2"x1"~20"x18" Pressure rating Temperature range Body material WCB, CF8, CF8M, Ti, C-276 Leakage class ANSIIV, ...
Wuxi Smart Auto-control Engineering Co., Ltd.
DN: 10 mm - 300 mm
Stainless Steel 304 316L Tri Clamp Manual Sanitary Butterfly Valve Size: 1/2" to 10",DN10 to DN300 Material: SS304, SS316L Connection: Clamped/Threaded/Union/Welded/flanged Standard: 3A,DIN.SMS.ISO.RJT,DS,IDF Operation: ...
Wenzhou Ace Machinery Co., Ltd.
Jufan Industrial Co., Ltd.
Pressure: 2,000,000 Pa - 30,000,000 Pa
Temperature: 0 °C - 70 °C
The stop valve is operated by a manual operation lever. disconnected closed hydraulic circuit holds pressure at the secondary side. Multiple work pieces can be loaded and loaded by preventing the work ...
DN: 50 mm - 1,500 mm
Pressure: 16, 40, 64 bar
Temperature: -30 °C - 250 °C
High performance Double-eccentric wafer Butterfly Valve Name - High performance Double-eccentric wafer Butterfly Valve Characters - Light torque,Bi- direction seal with zéro leakage,one million times1 ...
Handa Valve Co., Ltd.
Zhejiang Jiangxin Copper Pipeline Co., Ltd.
DN: 2, 1.5, 1.25, 1 in
BEULCO gate valves enable safe shut-off of parts of the pipeline network or a system. The slides are designed so that spindle overruns and spindle breaks are not possible. The gate valve is equipped ...
BEULCO GmbH & Co. KG
DN: 15 mm - 20 mm
Threaded valves with 500 N actuator Valves from DN15 to DN20 -Heating, ventilation and air conditioning -Optional mechanical manual override -Self-calibrating proportional model
DN: 25 mm - 50 mm
Threaded valves with 1000 N actuator Valves from DN25 to DN50 -Heating, ventilation and air conditioning -Standard mechanical manual override -Stroke from 7 to 25 ...
DN: 0.5 in - 2 in
Pressure: 209 bar - 690 bar
Temperature: -54 °C - 538 °C
... mounting of bonnets not wetted to avoid seizure and leaks Smooth valve actuation, even under high pressure, leads to fault-free operation and long service life Metal valve seat with leak-tested ...
WIKA Alexander Wiegand SE & Co. KG
... using an arrangement of ball valves and/or needle valves in the same valve body. For applications with liquid or dirty media, ball valves are recommended due to easy ...
WIKA Alexander Wiegand SE & Co. KG
DN: 5, 10 mm
Pressure: 138 bar - 690 bar
... integrates two shut-off valves to separate the process from the instrument side. The modular monoblock design allows using an arrangement of ball valves and/or needle valves. Injection ...
WIKA Alexander Wiegand SE & Co. KG
DN: 8 mm - 14 mm
... Ball Valves Provide manual dispense control to a paint station or dispense point. Eliminating the nagging “dirt in paint” problems starts with having the paint drops comprised of Hosco smooth-bore, cavity-free, ...
Pressure: 2.5 bar - 15 bar
... the valve • 100% abrasive shut off - reducing wastage • Replace the elcoTOUGH™ rubber valve liner with just 2 bolts Ideal for metering heavy or aggressive abrasive materials, such as shot, grit or ...
Elcometer
DN: 15 mm
Pressure: 2.5 bar - 15 bar
... disconnecting the valve • 100% abrasive shut off - reducing wastage • Replace the elcoTOUGH™ rubber valve liner with just 2 bolts • Can be upgraded to an Elcometer AGV using an upgrade kit Suitable ...
Elcometer
Pressure: 15 bar
... quickly replaced without disconnecting the valve • 100% abrasive shut off - reducing wastage • Replace the elcoTOUGH™ rubber valve liner with just 2 bolts Suitable for all media types, the design ...
Elcometer
Pressure: 0.5 bar
Maintaining pressure Pressure loss, inlet / outlet 0.5 bar Valve switching time: 15 ms IP rating 67
Knife gate valves [SRP] in EN-GJL-250 cast iron with bronze blade seat for perfectly smooth travel even after long periods out of use. Flanges meet the UNI standards for perfect interchangeability with the pipelines of ...
DN: 0 mm - 0 mm
Pressure: 0 bar - 64 bar
Drain valve has been developed for manual discharging of condensate or any other non-aggressive fluid from compressed air(1) system. In order to prevent condensate from becoming re-entrained in the airstream ...
DN: 0 mm - 0 mm
Pressure: 0 bar - 420 bar
Temperature: -20 °C - 200 °C
Drain valve has been developed for manual discharging of condensate or any other non-aggressive fluid from compressed air(1) system. In order to prevent condensate from becoming re-entrained in the airstream ...
DN: 50 mm - 150 mm
Pressure: 0 bar - 25 bar
Temperature: 0 °C - 230 °C
Cleanvalve is a bottom flush valve designed for use on glass-lined, Stainless Steel or Nickel Alloy reactors / Tanks. This easy-to-operate, easy-to-clean, self-draining valve allows for a variety of ...
Please specify:
Help us improve:
remaining