LENGTH OF INSTALLATION ACCORDING TO DIN 3202 F1 column. material specifications Shaped pieces: St 35 seconds DIN 1629 Part 3 (1.0308) Flange: R-St 37-2 according to DIN 17100 (1.0112) Coating: PTFE according to ASTM D 1457-78 ...
DN: 2 in - 48 in
Temperature: -267 °C - 537 °C
... (Wafer Style Check Valve) Our industrial grade 304/316 stainless steel swing check valve is designed for a flanged piping system, between two flanges. The valves ...
Pressure: 6 bar
... plastic components, introduces SCV Series check valves for medical devices. These new check valves come in multiple medical grade materials and sizes to meet a diverse ...
Value Plastics
sanitary check valve
DN: 25 mm - 100 mm
Pressure: 10 bar
Temperature: 120 °C
Food Grade Non Return Valve Stainless Steel SS304 Check Valve A check valve is a valve that prevents the fluid from ...
To avoid the backflow of materials up to category 4 into the drinking water installation, the backflow preventer BA (acc. to DIN EN 1717 a “backflow preventer with a controllable middle pression area”) is used as an approved safety device.
DN: 6 mm - 10 mm
Pressure: 1.5, 12.5 bar
Use : welding and cutting Fluid : oxygen, acetylene Quick coupling : function
DN: 0.125 in - 0.5 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 130 °C
Ease of use : Easy to install Construction : Brass and nickel-plated brass Safety : for ringmains Construction Brass body Highlight Network safety
DN: 10 mm - 80 mm
Pressure: 40 bar
Temperature: -30 °C - 200 °C
Robust spring-loaded check valve type 4000 from Schubert & Salzer in seat cone design made of stainless steel with high flow rate for aggressive media and high operating temperatures. Size: ...
DN: 0.5 in
Pressure: 0 bar - 400 bar
Temperature: -10 °C - 120 °C
... pressure gauge valves per DIN 16271, the test pivot is sealed by a lens-type sealing ring and a screw cap placed on top; with valves per DIN 16272, the test pivot is separately isolated by an additional ...
... release of the manipulated object is required • Prevents suction through the blow-off lines • Reduced feed pressure for full valve opening
DN: 16 mm - 63 mm
Pressure: 420 bar
... Cartridges Valves Series CSE are passive slip-in cartridge valves similar to our CEE series, but here we have cartridge valve and cover in one valve unit. They are equipped ...
DN: 0.25 in
Pressure: 0 bar - 30 bar
This valve can be set from 0 till 30 BAR. It is used on the lubrication point. Key features: - Pressure: from 0 to 30 bar (adjustable) - Material: galvanized steel - Diameter port. 5 mm Elastomeric-plastic seal ...
M/F oil or grease check valve available with different threads.
BALL CHECK VALVES Ball check valves VAP, with EN 12050-4 certification, are designed for use even with soiled liquids to provide full guarantees of operation in heavy-duty ...
BALL CHECK VALVES VAP ball check valves prevent backflow during plant maintenance or stoppages. They are designed for use even with soiled wastewaters to provide full ...
They can be installed horizontal or vertical and do not require any maintenance. All Zenit ball check valves hold certification under the EN 12050-4 standard, appendix ZA.
... lifting check valve, swing check valve and butterfly check valve three kinds: 1. Lifting check valves ...
Clack automatic valves, the best technology of its kind available on the market. The introduction of the first Clack valve to the market at the beginning of this century revolutionized the concept of ...
Retaining valve with embossed directional arrow or printed in black. With conical nozzles. Various uses.
DN: 1.6 mm - 25 mm
Pressure: 0.5 bar - 6,300 bar
Temperature: 0 °C - 200 °C
... aforesaid valves allow not only to fill, but also to carry out the delivery under pressure with nominal diameters being double compared with the valves that are normally on the market for the pressure ...
DN: 0.125, 0.25 in
Pressure: 0.2, 0.4, 0.7 bar
... applications to prevent line from emptying during wash cycles. - The Ball Check Valve Assembly is for use with standard 1/8” and 1/4” NPT Male threaded nozzles. - The Ball Check Nozzle ...
DN: 0.25, 0.125 in
Pressure: 0.4, 0.7 bar
... applications to prevent line from emptying during wash cycles. - The Ball Check Valve Assembly is for use with standard 1/8” and 1/4” NPT Male threaded nozzles. - The Ball Check Nozzle ...
... prevent the explosion propagating through the pipes that connect the equipment in question to the rest of the plant. The block valve is studied, designed and tested especially to safely partition the production rooms ...
DN: 15 mm - 350 mm
Pressure: 16 bar
Temperature: -10 °C - 350 °C
Lift check valve to DIN/EN with flanged ends, spring-loaded valve disc, maintenance-free. Benefits Check disc and closing springs made of stainless steel for ...
DN: 0.25 in - 1.25 in
Pressure: 0 psi - 5,000 psi
Temperature: -40 °F - 250 °F
Parker check valves are unidirectional flow control devices used primarily in hydraulic systems to eliminate potential damage caused by fluid back pressure. DT Series Check Valves ...
Parker Quick Coupling Division
DN: 0.25 in - 4 in
Pressure: 400, 125, 175 psi
Temperature: -12 °C - 178 °C
The Series BICV Brass Inline Check Valves are ideal for use with a broad array of service mediums including compatible oils, gases, fuels and hydrocarbons. They incorporate a soft seat for a bubble-tight ...
DN: 5.5, 8 mm
Pressure: 0 bar - 1 bar
... liquids and gases. The Flex Check® Zero Leak has integrated an additional plastic sealing element while maintaining exactly the same dimensions and is completely leak-free. Flex Check® high performance ...
Please specify:
Help us improve:
remaining