Richter manual valves

DN: 0.5 in - 2 in
Pressure: 25 bar
Temperature: -10 °C - 180 °C

Media: water, oil, air, aggressive media and steam(1) Media temperature: -10°C … +180°C Ambient temperature: -10°C … +60°C Body material: (CC491K EN 1982: 2000) Bonnet material: (CW617N EN 12165: 1999) Seal material: PTFE

Temperature: 425, 325, 530, 200 °C

•Z40H—150Lb Temp.：≤425℃ Supply for ：Steam, water ,oil etc non corrosion medium •Z41H 1.6C-16 Temp.：≤325℃ Supply for ：Steam, water ,oil etc non corrosion medium Z41Y •Z41Y1.61-161 Temp.：≤530℃ Supply for ：Steam, water ,oil ...

Pressure: 0 bar - 1,000 bar
Flow rate: 0 l/min - 75 l/min

... pass through the valve without pressure (manual bypass function). Application range for operating pressures of up to 1,000 bar. TECHNICAL SPECIFICATION Dimensions: 479xØ125 mm Weight: 7.3-8.2 kg SPECIFIC ...

These AWH butterfly valves are synonymous with quality, reliability and high hygiene standards. Supplemented with a comprehensive range of accessories, these valves therefore offer the ideal solution ...

DN: 8 mm - 80 mm
Pressure: 64 bar

Investment casting, hexagon, reduced bore, with lever. Parallel BSP thread to DIN/ISO 228 Housing and ball made of 1.4408. Sealing material PTFE, for screw pin to DIN 3852 Part 2 Form A. We reserve the right to alter dimensions.

DN: 25 mm

... and closes when the coil is de-energized. A vent in the valve body relieves trapped gas when the valve closes. A pop-out indicator button informs you when the valve is open or closed. The ...

DN: 0.25 in - 0.75 in
Pressure: 8 bar - 100 bar
Flow rate: 5 l/min - 800 l/min

Description HX are manually operated down valves, adjustable in their down speed. They close automatically upon release. They can be used for emergency manual lowering or in combination ...

DN: 0.25 in
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 50 °C

Shut - off valves series "UZVL" are produced with connection G1/4" and they are fit to be locked in the exhaust position by means of a standard padlock.

DN: 4 mm - 38 mm
Pressure: 350, 400, 500 bar
Temperature: -20 °C - 80 °C

Connection 1 + 2 BSP cylindrical internal threads Sealing form 1 + 2 for screw-in pins with shapes A, B and if necessary E Note Bitte die Bedienungsanleitung für Kugelhähne beachten. Bitte die zul. Druckangaben ...

DN: 0.75, 0.5 in
Pressure: 150, 300 psi
Temperature: 358, 550 °F

... Control Four-V Port Globe Valves are equipped with a micrometer dial and pointer which enables the valve to set within 1/100th of a turn of the handwheel. This allows you to fine-tune the blowdown flow ...

DN: 40 mm - 125 mm
Pressure: 6, 16 bar
Temperature: -20 °C - 80 °C

The asa butterfly valve with SAE and DIN flange connections allows the combination with an elastic element (rubber compensator expansion joint) to make a short compensating and economical connection with the pump port. ...

DN: 0.5 in - 6 in
Flow rate: 0 us gal/min - 880 us gal/min

... calculations when selecting control valves Always maintains 100% authority, ensuring excellent control Combination valve reduces cost and more accurate flow control lowers lifecycle costs ...

Pressure: 28,000,000 Pa
Temperature: -20 °C - 100 °C
Flow rate: 0 l/min - 120 l/min

... swing motor LS control + constant horsepower control Good for straight traveling of wheel motors Various kinds of attached valves

DN: 80 mm
Pressure: 10 bar
Temperature: -40 °C - 180 °C

Features •Increased safety •Superior corrosion resistance •Extended lifetime •Lower operating costs Specifications •Design - ISO/DIN •Nominal Pressure - 10 bar •Lining - PFA •Housing Material - EN-JS 1049 •Face-to-Face ...

Pressure: 250 bar
Flow rate: 120 l/min

... connect valves in series using a HPCO coupling. If a HPCO (fitted to T1) is installed for the use of downstream valves, a second pressure relief valve is required to control the pressure ...

DN: 0.125 in - 0.375 in
Pressure: 16 bar
Temperature: 60 °C

This vented 2-Way Ball Valve provides quick and easy manual isolating and venting of either pressure gauges or any other pressurized control loop components.

DN: 8 mm - 50 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C

industry, high temperature, high pressure PRESSURE PFA/PS in bar BODY : CF8M BALL : Stainless steel 316

DN: 50 mm - 600 mm
Pressure: 1, 1.6 MPa
Temperature: 425, 80 °C

Syrup, Pulp, Sewage, Coal SIurry Ash Slag Water Mixture Material of Major Parts and Components Body and cover -Stainless Steel, -carbon steel Flashboard -Stainless steel, -carbon steel Stem -Stainless steel - - Sealing ...

DN: 0.375 in

Ball valve • Very suitable for quick shut-off valve (open-close) • Can be operated under maximum pressure • Connection: 3/8" NPT female (2x)

DN: 4 mm
Pressure: 500 bar

... SAE J 514 (UN/UNF), ISO 8434-3 (ORFS), DIN 2353/ISO 8434-1 (24° taper, light and heavy series) Ball Valve Mild Steel, zinc/iron-plated 3-way Ball Valves 24° 06L

DN: 12 mm

This is the LBS-PN 64 series of ball valves from FG Inox. It is engineered from an AISI 316 stainless steel and is made with a female threading type on both ends. The series comes in 8 variants that have diameters ranging ...

DN: 0.25 in
Pressure: 5,000 psi

Multiple-turn flow restrictor valves Features Hytec’s Needle Valves are multiple-turn flow restrictor valves which provide finely adjustable flow control for components or circuits ...

DN: 25 mm - 150 mm

The "Monopok" valve is a 1/4 turn ball valve shutoff, with full waterway, made of an aluminium alloy section heat-treated. The whole is machined on a computerised and automated machine tool, which guarantees ...

DN: 1 in - 10 in

Both steam pressure reduction and temperature reduction (Desuperheating) are done in a single valve making it an extremely efficient, cost effective and compact solution. Features - Compact Design - High turndown ...