Richter manual valves

DN: 34, 25, 50.5 mm
Pressure: 12 bar
Temperature: 150 °C

Characteristics: Side pipe sanitary sampling valves are designed for sampling of liquids on pharmaceutical, chemical, F&B and cosmetics products. O-Ring closing system. Documentation: Laser marking for traceability ...

Model : MSC100 / 200 / 300 / 500 / 600, Medium : Air, Operating pressure range: 0~1 MPa, Proof pressure: 1.5 MPa.

DN: 0.125 in - 1.25 in

... Ross E104 is an array of valves that can handle heavy-duty applications. Their frameworks are constructed with heavy cast aluminum offered in 2/2, 3/2, 4/2, or 4/3 configurations with port sizes from G 1/8 up to G 1-1/4. ...

DN: 65 mm - 200 mm
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 60 °C

... performance butterfly valve for closing or flow regulating applications. Greater flow rates and reduced pressure drop across the valve, along with fine control, integral seal and ease of actuation means ...

DN: 10 mm - 150 mm
Pressure: 10 bar - 63 bar
Temperature: -196 °C - 200 °C

... – adjustment for actuator, flange according to ISO 5211 – seal elements change possible – in the case of manual lever control the ball valve can be retrofitted by locking the open-closed positions ...

DN: 50 mm - 1,500 mm
Temperature: -196 °C - 593 °C

Non-rising Flat Gate Valve Product type On/off Valve Valve Type Non-Rising Stem Flat gate valve Model Z47H(F) Size NPS 2～NPS 60/DN50～DN1500 Design ...

DN: 40 mm - 300 mm
Pressure: 10, 16 bar
Temperature: -35 °C - 200 °C

The KTN 266ITT is our butterfly valve with a wafer type connection, seat and ptfe disc . The ptfe seat and disc give the valve great resistance to corrosion . The range is from DN 40 to DN 300 , replacing ...

DN: 50 mm - 200 mm
Pressure: 10 bar

BUTTERFLY VALVES AISI 316 BODY, DISC AND SHAFT,FLANGES PN10 AND ANSI 150 Butterfly valves type Wafer : - AISI316 body, disc and shaft - PTFE body seat over EPDM backseat - Assembly between flanges ...

DN: 80, 100 mm

Fully welded ball valve, standard model, regularly available in the sizes up to DN 80 (3”) full bore or to DN 100 (4”x3”) reduced bore (bigger diameters on request), PN 10÷50 or ANSI 150-300, in carbon steel with floating ...

Pressure: 10 bar
Temperature: 135 °C

Aseptomag® single-seat sampling valves are used for the safe sampling in UltraClean and Aseptic processing plants. When not actuated, the internal assembly seals the valve seat in a leakage-free manner ...

DN: 1 in - 2.5 in

TECVAL Boiler Blowdown Valves blow down sludge formed in steam boilers. Devices in grey iron or steel, sizes range from 1" to 21/2", threaded or flanged, with a quick, slow, or automatic opening mechanism.

DN: 24 in - 36 in

DeZURIK’s stocks 24-36” Cast Iron PEC Eccentric Plug Valves with Mechanical Joint (MJ) end connections and NBR plugs. Manual actuators are configurable with handwheel or 2” nut. The interiors and exteriors ...

DN: 100 mm
Temperature: 80 °C

... closure. Whether upstream, downstream or main process: A comparison with classic methods shows that this split butterfly valve technology can make your process safer. because AVAX is made entirely of pharmaceutical-compliant ...

DN: 1 in - 4 in

... Flush Bottom Tank Valves are used for discharging of material from reactor vessels and tanks. Our Ball type Flush Bottom Tank Valves are available in full bore, reduced bore, manual & ...

DN: 50 mm - 300 mm
Pressure: 10 bar

Replaceable top packing gland enables sealing replacement without disassembly of the valve The valve is self-cleaning when opening the valve, an additional scraper is available for extra ...

DN: 0.5 in - 6 in
Pressure: 16 bar
Temperature: -46 °C - 400 °C

... series is a line of ball valves manufactured by Penta. It offers an efficient solution for high-temperature fluid handling with reliability and capability. The ball valves are also produced with quality, ...

DN: 20, 15 mm
Pressure: 16 bar
Temperature: -20 °C - 90 °C

Built-in valve, F/F threaded, with stop cock, with protection cover.

... performance butterfly valves are widely used in many industries including heating, ventilating and air conditioning, power generation, hydrocarbon processing, water and waste water treatment, marine and commercial shipbuilding. Valves ...

DN: 15 mm - 80 mm
Pressure: 10 bar - 400 bar
Flow rate: 0.1 m³/h - 6.3 m³/h

... limited by the design of the valve. The valve seat and plug are made of ceramic or solid stellite materials, the mechanical performance of which assures high durability of the product. We can adjust ...

DN: 1.25 in - 24 in
Temperature: -10 °C - 110 °C

... steel disc version)Available in the following versions: ● with lever (lockable in both open and close position) ● with manual gear ● with CUTTER (DN≤200) or CUTTER-XL (above) electric actuator ● with HOVERCRAFT ...

DN: 15 mm - 125 mm

... from bar (A 105 or AISI 316) Thread ball body-cover Flanges drilled acc.to ANSI Possibility of equipment with handlever, manual gear, pneumatic or electric actuator (on request) Control equipment connection according ...

DN: 25 mm - 200 mm
Pressure: 10, 16 bar

... OPENING SYSTEM BREAKS THE SEDIMENT OR CRYSTALLIZED LAYER ON THE BOTTOM OF THE TANK BOTTOM DRAIN VALVE • Rising opening. • This model can be made, with manual action by handwheel, or by double or ...

DN: 50 mm - 500 mm
Pressure: 6 bar - 10 bar
Temperature: 200, 70 °C

Intermediate flange butterfly valve for shutting off dusty and powdery bulk materials. MATERIAL HOUSING :Aluminum cast MATERIAL SEALING DISC :Structural steel, stainless steelMATERIAL SEALING RING :PUR, VMQTIGHTNESS ...

DN: 0.5 in - 30 in

Wcb API600 Class 600lb Cast Steel Gate Valve , Manual Actuator 4 Inch Gate Valve Product Details: Place of Origin: - Wenzhou China Brand Name: - JIEYU Certification: - ...

DN: 0.25, 0.125 in
Pressure: 0 bar - 8 bar
Temperature: -20 °C - 80 °C

2/2-way toggle lever valve, both sides, Push-in connector hose 4, G 1/8, Manually operated toggle valves, 2/2 and 3/2-way types. For all applications where compressed air must be switched ...