Pressure: 0 bar - 16 bar
Temperature: -20 °C - 80 °C
Flow rate: 23 l/min
Assists in complying with safety regulations Tamper proof Compact and safe design Low pressure drop Automatically resets after failure correction High corrosion resistance High air pressure rating Medium: ...
DN: 3, 6, 8 mm
... metering valve is tested for bubble tight shut-off at 100 psig (6.8 bar) differential pressure. MBV-F senes metering valve handle dead stop ts set at 4 to 10 std cm3/mm ...
DN: 0.125 in - 1 in
Pressure: 0 bar - 15 bar
Temperature: -10 °C - 50 °C
... main air supply. It is a three-way valve that relieves the downstream system in the closed position. This makes it useful for maintenance operations or when the air supply to a machine or piece of equipment needs to be ...
METAL WORK
DN: 0.25 in - 2 in
Pressure: 0 bar - 15 bar
Temperature: -10 °C - 50 °C
The job of this valve is to make the circuit independent from the air supply. It is basically a three-way valve. In the closed position, it cuts off the air supply and discharges the downstream circuit ...
METAL WORK
DN: 6, 8 mm
Pressure: 0 bar - 10 bar
Temperature: -20 °C - 60 °C
... a two-way unidirectional valve, while V3V is a three-way valve with free discharge in the area around the control knob. The locked version is probably the smallest available on the market. A lock is provided ...
METAL WORK
DN: 15 mm - 50 mm
Pressure: 16 bar
Temperature: 2 °C - 170 °C
V5013R Series linear control valves are 3-way mixing control valves suitable to regulate hot and chilled water flow across a wide range of KVS requirements. V5013R valves are used ...
DN: 0.375 in - 2.5 in
Pressure: 16 bar
Temperature: 180 °C
Parker's shut-off valves are designed for the safe handling of air, gases and liquids for many hydraulic, pneumatic, instrumentation, refrigeration and aerospace applications. Our valves ...
DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C
DIALOCK® diaphragm valve with stroke limiter and male ends for solvent welding, metric series. The DK DIALOCK® diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty ...
FIP - Formatura Iniezione Polimeri
DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C
Pneumatically actuated diaphragm valve with male ends, metric series. Normally Closed function. The DK diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. ...
FIP - Formatura Iniezione Polimeri
DN: 15 mm - 65 mm
Pressure: 10 bar
High visibility graduated optical position indicator protected by a transparent cap with a seal O-Ring. Compact and light piston in PP-GR, ideal for heavy-duty applications in chemically aggressive environments with a diaphragm ...
FIP - Formatura Iniezione Polimeri
DN: 0.5 in - 2 in
Habonim’s DC47 Diverter Cryogenic line is extremely flexible and space saving valves. It’s enable the piping and machine designer to save valves, space, flow elements, while enhancing safety and simplicity. Special ...
HABONIM
Pressure: 400 bar
Cylinder body made of steel, phosphatized. Remaining parts made of tempering steel. Valve seat and piston are hardened and ground. This valve is leak free. The stop valve ...
DN: 6 mm
The hand valve provides bubble tight shut-off time after use. The valve is directly attached into the plate with O-ring seal.
DN: 1 mm - 1.1 mm
Pressure: 0 bar - 13.8 bar
The MSV series slide sleeve valve provides an efficient in-line three-way valve. When the sleeve is moved to the “ON” position, fluid is allowed to pass through the valve. When the sleeve ...
Beswick Engineering Co, Inc.
DN: 1.78 mm
Pressure: 500 psi
Beswick’s miniature ball valve is an excellent choice for applications requiring a compact on/off valve. This design offers small size, light weight, and non-restricted flow. Approximate Weight: About ...
Beswick Engineering Co, Inc.
DN: 1.78 mm
Pressure: 500 psi
... selector ball valve this is manufactured using stainless steel materials. It is an excellent choice for application requiring a port selection valve. The MBVT-1414 allows bi-directional flow between ...
Beswick Engineering Co, Inc.
DN: 1.5 in - 6 in
Pressure: 5 bar
Temperature: 135, 140 °C
The next generation of mixproof valve technology is the result of continued development from both APV and Waukesha Cherry-Burrell process technologies. Used for the reliable separation of dissimilar fluids, the D4 Series ...
DN: 38 mm - 152 mm
Pressure: 7, 10.3, 10 bar
Mixproof valves provide safe separation of dissimilar products within the same valve body. Specifications For general purpose mixproof applications, we offer the W71 Series for standard shutoff ...
DN: 25 mm - 152 mm
Pressure: 5 bar - 84 bar
Temperature: 21 °C - 138 °C
W60 series single seat valves are used to shut-off or divert flow in a process system. These valves are pneumatically or manually operated, and offered in a wide variety of configurations. ...
DN: 6 mm - 80 mm
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 180 °C
Globe valve - 507 The GEMÜ 507 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel and is manually operated. The valve spindle is sealed by a self-adjusting ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 15 mm - 100 mm
Pressure: 0 bar - 40 bar
Temperature: -10 °C - 60 °C
... 539 2/2-way globe valve has a hollow shaft actuator and is electrically operated. The eSyDrive hollow shaft actuator can be operated as an OPEN/CLOSE actuator or as an actuator with integrated positioner or process controller. ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 4 mm - 25 mm
Pressure: 0 bar - 5 bar
Temperature: -10 °C - 100 °C
The GEMÜ 660 2/2-way diaphragm valve has a stainless steel piston actuator and is pneumatically operated. The valve was designed for dosing and filling a wide range of products. All metallic actuator ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
Pressure: 3 bar - 5 bar
Temperature: -20 °C - 100 °C
These valves are similar to "SHUT OFF" valves for SMX metering element. The difference is that are not connected to metering elements but mounted directly on the feed to create different ...
Temperature: -20 °C - 40 °C
Vacuum Valves, 3 Channels, AG Series . Connection on the vacuum network . Electric control . Voltage: 12 VDC / 24 VDC ou 24 VAC / 110 VAC / 220 VAC . NO or NC for the vacuum or compressed air supplied servo Characteristics . ...
DN: 20, 15, 25 mm
Pressure: 16 bar
Temperature: 5 °C - 160 °C
ON-OFF functioning, with 1 extra free micro switch on opening 2 points control actuator with relay Fast push connection
Comparato Nello S.r.l.
DN: 15, 20, 25 mm
Pressure: 16 bar
Temperature: 5 °C - 160 °C
ON-OFF functioning, with 1 extra free micro switch on opening 2 points control actuator with relay Operating time: 45 sec for 90° rotation – 8Nm Fast push connection
Comparato Nello S.r.l.
DN: 15, 20, 25 mm
Pressure: 16 bar
Temperature: 5 °C - 160 °C
SINTESI motorised valve – BY-PASS BRASS ON-OFF functioning, with 1 extra free micro switch on opening 2 points control actuator with relay Operating time: 45 sec for 90° rotation – 8Nm BY-PASS BRASS ball valve ...
Comparato Nello S.r.l.
DN: 50 mm - 150 mm
Whether it is silos, mills or extraction systems, our slide valves enable a safe isolation, and are also available for demanding CIP, dust or gas applications. The REDEX® slide valve is suitable for the ...
DN: 50 mm - 500 mm
Whether it is silos, mills or extraction systems, our slide valves enable a safe isolation, and are also available for demanding CIP, dust or gas applications. The RSV slide valve is suitable for the ...
Hydraulically operated valve for blocking and unblocking of flows.
WEH GmbH Verbindungstechnik
Pressure: 4,200 bar
Manual valves for manual blocking of fluids. Available as straight or angled design.
WEH GmbH Verbindungstechnik
Pneumatic Valve for blocking and opening. Usable as normally open and normally closed.
WEH GmbH Verbindungstechnik
DN: 25 mm - 200 mm
Pressure: 10 bar - 40 bar
Temperature: -40 °C - 450 °C
... Neles® series E ball control valves are designed to meet the most severe erosive service requirements of wide range of industrial applications in pulp & paper, petro-chemical, refining and related industries. E series ...
Metso Automation
Pressure: 0 bar - 10.3 bar
Temperature: 200 °F
... available in both mild steel and stainless steel construction. Knife gates come complete with air operator and solenoid valve. All standard valves are pressure rated to 150 psig and temperature rated ...
DN: 15 mm - 200 mm
Pressure: 16 bar - 40 bar
Temperature: 0 °C - 400 °C
Nominal diameter DN 15 .200 Nominal pressure PN 16,25,40 Body made of sph. cast iron EN -GJS-400-18-LT, EN-GP-240-GH Bellows seal (TA-Luft') with safety stuffing box High Kvs-values (favorable Zeta-values) High seat tightness External ...
DN: 12, 6 mm
Pressure: 0 bar - 500 bar
Temperature: -20 °C - 60 °C
C2.940 High-pressure shut-off valves C2.940 High-pressure shut-off valves max. operating pressure 500 bar nominal diameter: ND 6 and 12 temperature range: 40º ... ...
DN: 15 mm - 200 mm
Pressure: 4 bar - 16 bar
Temperature: 140, 110, 90 °C
Butterfly valves/Leakage butterfly valves KIESELMANN butterfly valves are a space-saving solution for hygienic process plants. They are preferably applied for panels, for tank shut-off ...
Kieselmann GmbH
DN: 0.11 in - 0.56 in
Pressure: 1,550 bar
Temperature: -50 °C - 230 °C
... thus a high reliability of the valve. MAXIMATOR valves of the 21V series have a cold-machined stainless steel body. Valve bodies are available in six different designs and can be equipped ...
DN: 25 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 60 °C
... pneumatic rotary actuator. Gas ball valves are mainly used to shut off the gas flow in gas trains or gas installations before and after other equipment like gas pressure regulators, gas meters etc. These ...
DN: 0.375, 0.5, 0.125, 0.25 mm
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C
The stop valve is a pneumatic device that locks the cylinder’s stroke in case of pressure loss in the system. The valves are mounted directly on the cylinder’s supplying ports and do ...
DN: 0.25, 0.375, 0.5, 0.75, 1 in
Pressure: 15 bar
Temperature: -10 °C - 50 °C
The product has a maximum pressure of 15 bar, with a minimum temperature of -10 /and goes up to +50° C. This valve uses air as a fluid medium. To continue, 6bar flow rate with ∆p 1bar, in which 1 is 1850 Nl/min, 2 ...
DN: 1, 2 mm
Pressure: 0 bar - 88 bar
Temperature: -20 °C - 50 °C
... turning counterclockwise, the valve will close the air in the entrance (A) and the air at the lower end of the valve (B) will be released by means of the outlet (E). When the control element (C) is push ...
DN: 8, 12, 10, 6 mm
Pressure: 4, 10 bar
... via an integrated 1/4 turn isolation valve John Guest push-fit polypropylene Speedfit to Speedfit push-fit shut off valve isolates supply to a fixture or appliance. Fast and simple ...
Please specify:
Help us improve:
remaining