RITTAL coolers

Keep the engine in a proper temperature range under all operating conditions. The cooling system should not only prevent the engine from overheating, but also prevent the engine from undercooling in winter.

Power: 12.5 W

... now achieved a breakthrough in terms of increasing the performance of magnetocaloric cooling systems. Magnetocaloric cooling systems do not require environmentally harmful or explosive refrigerants such as CFCs (chlorofluorocarbons) ...

Steam cooler for pipeline installation. Sizes: DN 25 to DN 350 Materials: Our steam coolers are made of austenitic stainless steel Standard materials (according to AISI): 316Ti and 321 Superheated ...

Cooling machine is used to be connected between the frying machine and the instant freezing machine, it blows air to the surface of the products, reduce the temperature of the surface products in order to deduct the load of the freezing ...

Power: 2.6 kW - 4.7 kW
Maximum temperature: 3 °C - 5 °C

... temperature is about 60-80 centigrade, after cooler, the temperature is not higher than room temperature +3 to 5 ℃ Cooler adopts counter flow theory, cold air goes to cooler from bottom ...

Power: 22 kW - 60 kW

Grate cooler machine of CHAENG, adopts the new efficient grid plate structure which with very few leakage occurring, less abrasion and longer service life. Thermal efficiency :≥72% Feeding Material temperature :1370 ...

Power: 37 kW
Maximum temperature: 30 °C
Flow rate: 13 m³/s

... the sprinkling and the condensation water from the airflow Skids in longitudinal direction for setting up and moving the evaporator on a stage or on the tunnel bottom

Flow rate: 10 l/min - 300 l/min

Air /oil coolers with blower or suction vent; air flow from 140 to 6,000 cm/H; oil flow 10-300 l/min; heat dissipable power from 1,000 to 30,000 Kcal/H; electric supply 12-24 VDC or 230-400 VAC at 50/60 Hz; optional termostat, ...

Final product cooling systems Cooling systems designed for end-of-line in plastic materials extrusion processes. We can offer two versions: Hydraulic cooling system for the ...

Power: 15 kW - 185 kW
Maximum temperature: 1,000 °C - 1,300 °C

... the entire system. According to its structure, cooler can be divided into monocular cooler, grate cooller and compound fertilizer drum cooler. The Working Process of Monocular Cooler: When ...

Flow rate: 15 m³/h - 120 m³/h

This series equipment is a continual cooler, after the loose old sand enters the fluid machine, in the high-pressed air blowing force blowing wind situation, it assumes the ebullition condition and starts the snake-shaped ...

... up to 65% smaller than Fin Tube designs. Typically supplied with fan/motor but can be supplied without. All aluminum cooler core. Maximum performance with non-louvered fin design that prevents clogging. Low ...

Flow rate: 400, 600, 900 l/min

... Cased Industrial Chiller Features: -Compressor is used "COPELAND" brand which made in the USA.The inside safety protection can guarantee the long lasting of the chiller well.The pump is used made ...

Power: 230 W
Flow rate: 6,800 m³/h

Air volume: 6800 m³/hour Air out size: 605 x 635 Water consumption: 6 – 11,5 l./H. Tension: 230 V. / 50 Hz. Consumption: 0,23 Kw. 3 speeds Water capacity: 120 l. Dimensions: 890 x 500 x 1380 mm. Noise: 56 dB. Net weight: 37 kg.

Maximum temperature: 30 °C - 32 °C

With €coenergy System for the cooling of the oil circuit of the presses DEGA has eliminated completely and all-year-round the use of a Chiller, saving up to 90% cost when compared with consumption of the chillers. The system consists ...

The Power Chiller, water cooling unit, monitors and controls the temperature of your device, ensuring the quality, reliability and lifespan of your equipment. The cooling method provides more thermal stability (± 0.1°C) and does not ...

Maximum temperature: 580, 650 °C
Pressure: 250 bar

Steam Equipments Pvt Ltd.’s sample cooler is a compact unit, specially designed as per ASME SECVIII, Div-1 & ASME PTC-19.11 recommendations, to handle high pressure & high temperature applications. These coolers ...

Industrial Chillers ETC-Series air-cooled water chillers designed for industrial application of various industries. Built to operate in stringent ambient conditions with continuous duty applications. •Eco-friendly ...

Power: 8.7 kW
Maximum temperature: 5 °C - 35 °C
Flow rate: 88 l/min

Water chiller is a device used to lower the temperature of water. Water chiller use water as a refrigerant instead of toxic chemicals. This makes them safer for people who have contact with them. Water ...

Power: 145 BTU/h
Flow rate: 57 l/min

... of our competitors all of the our Cabinet Cooler ™ Cabinet Panel Coolers are stainless steel, not just the vortex tube for longer life and flexible use.™ Cabinet Cooler are compact and ...

At the outlet of the oven a Take-off conveyor transfer the product from wire-mesh or band of the oven towards the Cooling conveyor. For an effective cooling this is long one time and a half or two times the length of the oven, in ambient ...

... Through low-temperature treatment, it can prevent loss of dry substance, and damage caused by insects and mildew. Our grain chiller is suitable for cooling of wheat, barley, rapeseed, maize, rice, paddy, soybean, sunflower ...

Power: 800 W - 5,500 W
Flow rate: 60 l/h - 500 l/h

FRIO instant water chillers exploit a system with solid storage eliminates any possibility to contaminate cooled water with Freon and lubricating oil leaking from breaking in the refrigerating circuit, and so conformed ...

... Continuous Rotary Cooler from Hughes Equipment will stop the heating process in foods that have been blanched or cooked as part of a food processing flow. This unit works well for pasta, rice and vegetables. The Continuous ...

The hydro-cooler consists of a stainless steel water tank, a cooling tank and a chain conveyor belt with specially perforated carriers. On the product infeed side, a water buffer with pump is mounted. On the product ...