DN: 15 mm - 200 mm
Pressure: 16 bar
Temperature: -10 °C - 300 °C
Hight quality bellow sealed globe valve, with double titanium bellows.
Dansk Ventil Center A/S
Temperature: -40 °C - 120 °C
... installation Extended copper tails Indicator on stem shows valve position – open or closed Fully opened or closed with a quarter turn of the valve stem Positive stem stop ...
Henry Technologies
Pressure: 80 psi
... : ST100 Digital valve controller PV107-02 Valve Stand with purge cup Dispensing can extend across numerous industries and applications that require dosing in an accurate and controlled manner. ...
DN: 0.125 in
Pressure: 0 bar - 400 bar
... pressure: 400 bar Medium: Air / Nitrogen Ordering code: T1700 T1700 Mini Needle Valve Low cost Durable Low torque Soft seated Tight shut-off Metering valve Adjustable gland packing
DN: 65 mm - 200 mm
Pressure: 10 bar - 160 bar
Temperature: 550 °C
Version Straight bonnet Cast steel body and bonnet Shut-off disc, Fig.No. 200 AE Throttle disc, Fig.No. 200 BE Outside screw and yoke Position indicator if required Turning and rising stem Pressure and temperature ...
Stahl-Armaturen PERSTA
... micro liter. An internal spring return makes the valves fully adaptable for use with Techcon Systems controllers. A short opening stroke provides an extremely fast and positive shut-off. The seal-less ...
DN: 50 mm - 2,000 mm
Wafer style, uni-directional knife gate valve. One piece integral cast body with guides to support the gate and seating wedges. High flow rates with low pressure drops. USE This knife gate valve is ...
C.M.O.
DN: 0.25 in - 4 in
Pressure: 10,000 psi
Temperature: -54 °C - 538 °C
... of lightweight Monoflange isolation valves that are ideally suited to a wide range of instrumentation applications via standard flanged pressure take-off points. The compact design incorporates the Isolation valve ...
Budenberg
DN: 2.5 in - 16 in
... Corporation has introduced their new AWWA C515 Gate Valves. These new gate valves feature three different connection types such as push-on, flange x flange, and mechanical joint. The ...
DN: 0.125, 0.25, 0.5, 0.75 in
Pressure: 0 psi - 125 psi
Temperature: -20 °F - 225 °F
Humphrey offers you a variety of air piloted valves within the unique construction of the classic Diaphragm-Poppet Series. Choose diaphragm-poppet valves for your difficult, critical applications when ...
Humphrey Products
DN: 0.375 in - 2 in
Pressure: 150 psi
Temperature: 70 °F
All model 83 open/close electrically actuated ball valves sizes 3/8″ thru 2″ have direct mounted unidirectional 90º turn actuators (115 Vac & 220 Vac, 12/24 AC & DC are reversing). The actuators are weatherproof (NEMA ...
Feeding and metering slide gate series is specifically designed for gravity-flow applications. The variable slide gate actuation setting enables fractional material flow and full-open or closed formats. It is constructed with carbon steel-infused ...
DN: 0.25 in - 4 in
... ball valve (Series KV20) available in sizes from 1/4" to 4" with a stainless steel body and quarter turn on/off design. High quality ball valves sold exclusively by Valtorc. Series KSV20 (3PC Stainless ...
Valtorc
DN: 2.5 mm
Smooth operating spindle made of PTFE, valve bore: 0-2,5 mm, with retaining device to avoid complete unscrewing, screw cap and retaining device made of PP, operating temperature: -20 to +150 °C, made of DURAN® tubing, ...
DN: 25 mm - 500 mm
Pressure: 1.6 bar - 16 bar
Temperature: -46 °C - 650 °C
... eccentric rotary valve, features wide range of applicability, good shut-off capability, high efficiency, large capacity and regulating ratio. Typical application: gas, steam, liquid and slurry service. The ...
Wuxi Smart Auto-control Engineering Co., Ltd.
DN: 25 mm - 100 mm
Temperature: -10 °C - 120 °C
SS304 / SS316L Sanitary Stainless Steel Pneumatic Stop Reversing Valve Sanitary flow diversion Seat valves are used to change the flow direction of pipeline.There are lots of different ...
... experience into creating a variety of actuators and on/off valve options for the toughest of applications. See what our technology can do for your operations. Proven Performance Our On/Off valves ...
Pressure: 2,000,000 Pa - 30,000,000 Pa
Temperature: 0 °C - 70 °C
The stop valve is operated by a manual operation lever. disconnected closed hydraulic circuit holds pressure at the secondary side. Multiple work pieces can be loaded and loaded by preventing the work ...
Pressure: 500 bar
Flow rate: 15 l/min
... 51 519). The check valves without pilot control feature a ball as a valve element. The valve version with pilot control contains a spherical grinded valve piston with ...
HYDROKOMP
DN: 2, 1.5, 1.25, 1 in
BEULCO gate valves enable safe shut-off of parts of the pipeline network or a system. The slides are designed so that spindle overruns and spindle breaks are not possible. The gate valve ...
BEULCO GmbH & Co. KG
CPS013 CPVC STOP VALVE TYPE II FACTORY PIPE-WORKSHOP FITTING WORKSHOP MOULDS WAREHOUSE MATERIAL PREPARE MATERIAL TESTING PRESSURE TESTING FOR VALVES PACKING LINE WAREHOUSE LOGISTICS SAMPLE ...
Yonggao Co., Ltd.
DN: 0.5 in - 2 in
Pressure: 209 bar - 690 bar
Temperature: -54 °C - 538 °C
... mounting of bonnets not wetted to avoid seizure and leaks Smooth valve actuation, even under high pressure, leads to fault-free operation and long service life Metal valve seat with leak-tested ...
WIKA Alexander Wiegand SE & Co. KG
DN: 5, 10 mm
Pressure: 138 bar - 690 bar
... integrates two shut-off valves to separate the process from the instrument side. The modular monoblock design allows using an arrangement of ball valves and/or needle valves. ...
WIKA Alexander Wiegand SE & Co. KG
DN: 0.5 in - 2 in
... or two shut-off valves to separate the process from the instrument side and a vent valve. The modular monoblock design allows using an arrangement of ball valves and/or ...
WIKA Alexander Wiegand SE & Co. KG
DN: 20 mm - 200 mm
Pressure: 50, 20 bar
Temperature: -50 °C - 427 °C
... actuator stability, shutoff capabilities, and superior valve positioning offers optimum control performance. The 21000 Series is also available in various materials, pressure ratings, and end connections ...
DN: 0.5 mm - 2 mm
Pressure: 30, 40, 65 bar
The RKE electric ball valve automatically opens or closes the compressed air tank via the control unit or connects and closes areas of the network from the compressed air supply as required. This prevents e.g. an unnecessary ...
Temperature: -80 °C - 400 °C
... BLOCKING VALVES AND NON-RETURN VALVES For medium flow regulation Robust, durable version Delivery complete with DILO connecting parts Temperature range of non-return valves -20 °C ...
Please specify:
Help us improve:
remaining