Sandvik Coromant drill bits

Diameter : 0.2 mm - 32 mm

The wide range of high-performance drilling tools supplied by NACHI, with diameters of 0.2 to 32mm, offers solutions for every application. High-speed steel or solid carbide drills can ...

... workpiece, ranging from general purpose drills suitable for a wide range of materials, to application drills designed with a specific material in mind. Drilling products include: A002 ...

Diameter : 0.3 mm - 20 mm
Length: 40 mm - 250 mm

Solid carbide flat drills for spot facing The MultiDrill MDF Type can be used for various purposes including high-efficiency spot facing and drilling in inclined and curved surfaces thanks to its point ...

Diameter : 20 mm - 54 mm
Length: 40 mm - 216 mm

TungSixDrill is the fi rst indexable drill in the world to adapt double-sided inserts with 6-cutting edges. The 6-cutting edges reduce the number of inserts consumed.

Diameter : 5 mm - 11.5 mm
Length: 70.5 mm - 120.5 mm

... includes tools for bore diameters from 5.0 mm to 11.5 mm. They are available in versions with a drilling depth of 1xd or 2xd. The corresponding drill insert bits are available in 0.1 ...

Diameter : 16 mm - 38 mm
Length: 50, 56, 60, 70 mm

... Highly engineered pocket seat design for high stability even in critical operations Uses and application Drilling Drilling: Cross-Hole Drilling Drilling: Inclined Entry Drilling: Inclined Exit Drilling: ...

Diameter : 0.2 mm - 1.49 mm
Length: 25 mm

With WhizDrill we have put together a range of micro drills that start at 0,1 mm and go up to 3 mm. These can be ordered to any geometry and shank sizes in stock are 1,00 mm, 1,50 mm, 2,00 mm, 2,50 mm, 3,00 mm, 1/8’ and ...

Diameter : 0.5 mm - 10 mm
Length: 38 mm - 118 mm

Self-centering twist drills with reinforced shank, 6.5xD1 cutting length. High-performance tools developed for the drilling of short chip materials.. TiAlN coating improves tool life in ferrous materials.

Diameter : 10 mm
Length: 21.4 mm

Aludrill Ø 9.0 mm with flat finish for M10 cold forming tap PART SPECIFICATION THREAD SIZE - M10 FINISHING - Plane surface SHAFT DIAMETER - 14.0 mm MATERIAL/MACHINE PARAMETERS MIN. MATERIAL THICKNESS - 1.0 mm MAX. MATERIAL ...

Diameter : 3 mm - 16 mm
Length: 46 mm - 115 mm

• facet point grind • main cutting edge form straight • optimised cutting edge geometry structural and case hardened steels • free-cutting steels, heat-treatable steels • alloyed steels up to 1200 N/mm² • cast materials • bronze, brass ...

Diameter : 4 mm - 12 mm
Length: 12 mm - 96 mm

... with polished flutes New 3 Flutes Solid Carbide Drill for Increased Productivity As part of TaeguTec’s new SFEED-TEC series of technologically advanced cutting tools, the SOLID-3-DRILL line increases ...

Diameter : 0 mm - 6.4 mm
Length: 0 mm - 144 mm

... action Shorter than the top competitor's bit for better access to tight spaces between studs and joists Perfect for drilling 2 IN and 4 IN joists Augers have self-feeding screw point that ...

This AMECA hand-operated installation tool drilling bit is the ideal unit to use with applications that require a commercially-available standard drill bit. All AMECA ...

Diameter : 12 mm - 40 mm
Length: 320 mm - 570 mm

For fitting in SDS-max chucks For rapid drilling in concrete, masonry and natural stone Advantages Four-cutting-edge drill bit for good centring in the drill hole Good ...

Diameter : 0.5 mm - 20 mm
Length: 50 mm - 150 mm

DRILLING AND THREADING FOR THERMOPLASTICS, CURABLE PLASTICS AND ELASTOMERS The requirements for synthetic compo- nents rise continuously. The quality of drills is especially concerned. In the series ...

Diameter : 3 mm - 10 mm
Length: 16 mm - 38 mm

Drill bits for wood HSS-G with 1/4" Hexagon Drive

Diameter : 10 mm

Milling cutter bodies Multi-purpose cutter with indexable inserts With POKOLM's insert cutter system, tools and rotating inserts are perfectly matched to form a comprehensive range of products capable of dealing with almost any condition. Thanks ...

... PCD step drill from MAPAL ensures optimum chip transport so that extreme reductions in machining time for drilling and boring processes in aluminium parts are possible. Where previously three tools were ...

Diameter : 3, 4, 5, 6 mm
Length: 60, 75, 85, 90 mm

HSS DRILL BIT + MANDREL FOR WOOD Centring point, 2 lay-out markers. 90° mandrel with 5 cuts.

Diameter : 0.01 mm - 0.05 mm
Length: 40 mm

... times longer than its diameter, and is finished with a Mugen micro coating. It also has a special thin film coating for Micro Drill operations on steel materials including stainless steel items. The cutting edge also ...

... wide range of carbide drills for processing diverse materials. With drill diameters in increments of 0.1 mm (up to diameters of 20 mm) and with drill bit lengths of 3xD ...

Diameter : 2.5 mm - 3.7 mm
Length: 12, 17 mm

Insert drills, Pilots. Counterbores, Countersinks and Toolholders Part No. - eg. 3.2 : 01B-3.2

Diameter : 0 mm - 13 mm

Diameter : 1 mm - 10.9 mm
Length: 40 mm - 95 mm

... 90 and 140-degree point angle, the tool's performance is maximized. • Implements stable drilling with a flute groove design considering chip evacuation and drill rigidity.

Diameter : 12 mm - 19.99 mm

The QUICKDRILL is a drill with a new locking mechanism designed to withstand unstable machining environments. It performs well in unstable applications such as interrupted cuts and asymmetrical holes. Additionally, ...