... multi-purpose operation : Humidity meter, Light meter, Anemometer, Type K/J thermometer. * Can show and record mult-probe's input measuring data on the same LCD display at same time. * Humidity : 0 to 95 %RH, 0 to ...
Lutron
... in one frame. OPTIM-2.0 is an ultrasonic measuring device designed for precise measurements of the speed of sound in gases. The measurement of the speed of sound is performed using the method of measuring ...
The most economical measuring instrument with the genuine LogPer antenna for detecting and measuring exposure to EMR / RF (HF). Frequency range: 800 MHz - 2.7 GHz Description Proven ...
GIGAHERTZ SOLUTIONS
The BAP 160 is housed in a sturdy, weatherproof stainless-steel metal case; it is equipped with an LCD screen for reading parameters that are simultaneously stored in the internal memory of the BAP 160 for PC processing. It is a measurement, ...
JEAN LUTZ SA
• Application :Street Lighting,turrimel lighting,etc. • Luminous intensity(cd)=Lux x Distance2 • Dual Display, 4-digit LCD reading. • Spectral Sensitivity close to CIE photopic Curve. • Measu ring Levels Ranging 0.01 to 200.0 KIux, ...
TES Electrical Electronic Corp.
• Auto Alarm(High/ Low Setting). • Triple LCD displays Barometnc pressure, • Temperature, and Relative humidity. • Dew point and Wet bulb temperature reading. • Absolute humidity, Mixing ratio and Enthalpy reading. • Water vapor ...
TES Electrical Electronic Corp.
• Datalogging area thermal environment monitor. • Quick WBGT measurement for assessing environmental heat stress. • Air velocity measurement. • Maximum / Minimum recording reading. • Auto datalogging. • Manual Data Memory Capacity. • ...
TES Electrical Electronic Corp.
... has a complete frontal panel but can have information that are been supplied. They also have inputs such as EMM with the measuring inputs of three currents and voltages that are adapted to use in one-phase networks. ...
Contrel elettronica
... measures. It has measuring inputs for three currents and three voltages in order to be adapted for their use in one-phase networks, on three-phase networks in devices with 4 and 3 wires without neutral or neutral not ...
Contrel elettronica
... 0,05 ÷ 5A rms for measure in 3 single phase line or bidirectional Measured parameters: Voltages, Currents, Frequency Measuring accuracy: Voltage: < 0.5% - Current: < 0.5% Frequency measure: 40 ÷ 100 Hz Digital ...
Contrel elettronica
... measurement specimens by eliminating oxide films and dirt between the probes and specimens. By addressing faulty contact, the instrument facilitates stable measurement and reduces the contact error rate, boosting productivity.
HIOKI EUROPE GmbH
... effects through an extra-large measuring surface - Perforated plates: optimal thermal flow between ground and sensor and melt water run-off - Stable, durable aluminium construction - No preparation of the ...
The tension meter DTX with its 12 measuring ranges up to max. 60 daN is suitable for use in the textile and wire industry. The models can be equipped with ball-bearing V-grooved guide rollers for material speeds up to ...
Hans Schmidt & Co
The mechanical tension meter DXE with small measuring head for applications where access space is limited or where filaments run close together are mostly used in textile industry or in wire industry for thin wires. The ...
Hans Schmidt & Co
The mechanical tension meter DX2-EDM with rugged aluminium housing is usable for measurements at all current wire EDM machines with wire diameter up to approx. 0.25 mm. The hand-held unit is available in 3 tension ranges from 50 - ...
Hans Schmidt & Co
The Wilma is a wire laser alignment device from Microplan that is primarily used for straightness testing. It is placed in machine tools with a wire fixed with two supports at the extremities. It displays the eventual error though its ...
TEN-SIT® is an electronic gauge, used for the correct tensioning of all types of belt drives. Its operating principle is based on the relationship between belt tension and the vibration frequency of the belt itself. TEN-SIT® is able to ...
... MAM sensors are orientation independent so the only thing you need to do is to place it in the X-ray beam and turn on the instrument. The rest is automatic – no menus, no selections. Full range measurements Ease-of-use ...
RaySafe
The H 35 is an electronic wood moisture meter based on the electric resistance measurement principle. It is designed for precise measurement of sawn timber (up to 180 mm thick), particleboards and veneers. The device is ideal for both ...
First tablet-inspired, multifunction optical loss test set (OLTS) delivering insertion loss, optical return loss and fiber length measurements at two wavelengths in five seconds via fully automated bidirectional FasTesT™ analysis. An ...
EXFO
... measurements, sounding, profiling, 2D, roll-along, 3D and 4D monitoring surveys, etc.). For imaging measurements, Iris Instruments proposes different standard heavy-duty multi-core cables (5 traces – 10m, 10 traces – ...
Iris Instruments
Epstein standardised measuring frame for controlling the magnetic sheets in compliance with IEC 404-2 / -3 that Vettiner created fifty years ago. Full description Vettiner is interested in measures of magnetic ...
Control of the impedance of inductive power circuits,identification of the degree of aging of the welds inside circuits
Very quick on site check of cos phi corretion capacitance mounted in battery without disassembly or disconnection
OhmCorr™ has two probes spaced 1.97" (5cm) apart which are placed in holes drilled to a depth of 3/8th" (8mm) and filled with conductive gel. The direct digital read-out of resistivity is displayed on the LCD when the control switch is ...
Apparent density The instrument is used to determine the apparent density of granules and powders. It is suitable for quality control of raw materials. It is available in different models according to different ...
... the correct dosage has been used? Lösung With the Spark M-30, you can easily check every DMDC dosage by measuring the methanol content! Our measuring method: Accurate - detection limit 1 ppm ...
Soluble Salt Tester for measuring the concentration of soluble salts on metal surfaces Measures the concentration of soluble salts (salt contamination) on metal surfaces in accordance with ISO 8502-6, 8502-9. • ...
The Teletector 6112AD is a new development which combines the proven devices 6150AD and 6150AD-t into one device. The operation is the same as with the 6150AD but the Teletector is now operated with 2 buttons. The “Light” function key ...
... simply storing the current dose rate, an average dose rate value is stored for each measuring point. The user can choose how long the average is to be taken for each measuring point. This allows better ...
... Operation is similarly simple as with the 6112B. The large rotary switch offers the five positions Off / Battery Test / Three Measuring Ranges. The range must therefore be set manually. The small switch for the time constant ...
... practically unlimited data storage. • Serial bidirectional data port and IR remote control for PC data transfer and wireless instrument control.
EMC Test Design, LLC
Sentience Measurement Device Robust design of cover and components: Optimised for outdoor air quality measurements Airflow path ensures unbiased measurements Quality-proven sensor components from well-established manufacturers ...
... Charging (DC), represents the main technology available for this type of check. NP 01 is the first TEXA tool of a new instrument generation developed and designed in order to measure particulate number concentration ...
Texa
The SICAM Q100 multifunctional measuring device is used for acquisition, visualization, evaluation and transmission of electrical measured variables such as alternating current, alternating voltage, frequency, ...
Please specify:
Help us improve:
remaining