TOTAL LUBRIFIANTS compressor lubricants

Pour point: -24 °C
Flash point: 284, 272, 248, 238, 244 °C

... The use of DACNIS allows real cuts in the operating costs of the compressed air production facility by optimising the compressor efficiency. Extending the service life of the separating filter elements. The DACNIS ...

Pour point: -33 °C
Flash point: 238 °C

The formulation of the DACNIS LD endows them with the following properties : - remarkable thermal and oxidation stability and hence a drain interval of 4000h under standard conditions of use, - reduction in the formation of carbonaceous ...

Flash point: 278, 280 °C

... thermal stability of the lubricant under high temperature conditions. Low foaming tendency for turbocompressor applications. Low volatility. Low vanish and carbon deposits. Protection against rust and corrosion. Compressor ...

Pour point: -57 °C
Flash point: 268, 262, 246 °C

... facility by: • Optimising the compressor efficiency Extending the drain intervals. The possible achieved drain intervals can be: - from 4000 to 6000 hours for fixed compressors in standard use - up ...

Flash point: 275 °C

... without deposit formation Robust anti-wear, anti-corrosion and anti-rust properties to ensure safe operation of gas compressors. Low pour point to avoid any oil freezing inside a refrigerant evaporator

Pour point: -39, -36 °C
Flash point: 238, 230, 224 °C

... efficiency, - increasing the drain intervals:  1000 h for field compressors  from 2000 to 3000 h for fixed compressors in standard use, and up to 4000 h with lubricant analysis ...

Pour point: -18 °C
Flash point: 260 °C

-Very high oxidation stability -Better control of deposit formation on the valve -Emulsion formulated between DACNIS P 220 CD and condensated water is not corrosive and can maintain the oil film -Good anticorrosion performance

Pour point: -45 °C
Flash point: 275 °C

... without deposit formation. Robust anti-wear, anti-corrosion and anti-rust properties to ensure safe operation of gas compressors. Low pour point to avoid any oil freezing inside a refrigerant evaporator

Pour point: -30 °C
Flash point: 220, 205, 200, 185 °C

... refrigerants. Absence of copper plating. Very good miscibility behaviour with refrigerants allowing a good oil return to the compressor (evaporator temperature higher than - 15 °C).

Flash point: 256, 246 °C

... the formation of black sludges (reaction between oil and ammonia). Low pour point, eliminating the risk of any residual lubricant freezing in the evaporator, there by providing excellent heat exchange. Very high ...