... shredder can be used upstream, in order to break up the chips to an extractable quality. Site of operation: - As a shut-off valve in the chip suction pipe system Weight: - ca. 20 kg Dimensions L x W x H: - 790 x 230 ...
DN: 2 mm - 17.5 mm
Pressure: 1,400 bar
Temperature: 10 °C - 80 °C
... aforesaid valves allow not only to fill, but also to carry out the delivery under pressure with nominal diameters being double compared with the valves that are normally on the market for the pressure ...
POMTAVA valve is a pneumatic needle valve, closed at normal state and opened with pressurized air. The closing is done with a spring. Version VPT1-04S is designed with a bellows sealing ...
POMTAVA valve is a pneumatic needle valve, closed at normal state and opened with pressurized air. The closing is done with a spring. Made in stainless steel, o'ring in FFKM. Version ...
DN: 0.25, 0.5, 0.75 in
Pressure: 0 bar - 5.5 bar
Temperature: 0 °C - 95 °C
Furon Q-Valve Pneumatic Valves from Saint-Gobain are cost-effective, high-performance products used for semiconductor processing. They are compatible with most common installations, and ...
Temperature: 500, 1,000 °F
... firing systems. Stock Knife Gate Valves (KGV) are specially constructed valves designed for extreme service. This ability to isolate portions of the burner line allows routine maintenance to be performed ...
Schenck Process Holding GmbH
DN: 1.5 mm - 382 mm
Pressure: 0 bar - 16 bar
Temperature: 0 °C - 140 °C
The Alfa Laval Sanitary Ball Valve (SBV) is a hygienic ball valve designed with a bore diameter the same size as the pipeline diameter. The full-bore design with zero flow restriction and minimum pressure ...
Alfa Laval
PNEUMATIC ISO G01 5/3 CENTER CLOSED DISTRIBUTOR FOR V2I Applications On/ Off V2i
... sampling valve is designed according to the latest construction standards and recognized safety rules. Advantages • A sample can be taken during the process to ensure that the output meets specifications before further ...
DN: 0.375 in - 0.5 in
Pressure: 145 psi
Temperature: 32 °C - 140 °C
... soft start valves protect your pneumatic system and give you peace of mind whenever installation or repair occurs. The valves raise incoming pressure, supplying air at ...
... VULKULAN™ sealing to minimise dust leakage. The actuator on the shutter type SKT can be manually, motorised and pneumatically operated and is guarded and secured according to the Ell machine directive. The shutters ...
DN: 65 mm - 350 mm
All gas fittings of the latest generation are characterized by a free cross-section corresponding to the nominal size and are “TA-Luft” certified. The adjustable lubricating gap allows an optimal lubricant application and particularly ...
DN: 0.5 in - 2 in
Pressure: 10 bar
Temperature: -40 °C - 150 °C
... injectioin) , ultra-high purity chemicals, etc. No only CSE standard diaphragm valves, we can also provide aseptic sampling diaphragm valves and Multi-port block diaphragm valves for ...
DN: 0.125 in
Pressure: 150 psi
HV operating valves are three position manually operated pneumatic valves that direct air flow to open and close MicroCentric air chucks and LDZ Air ...
Pipes in the flow line of Feed and Flour Factories are used to transmit the same products flowing from different locations to a single line. AREAS OF USE: IN PRODUCT FLOW PIPING SYSTEMS Flour, Bulgur, Paddy (rice), Pasta, Lentils, ...
... pharmaceutical materials Split butterfly valve (Alpha Beta valve), is made up of an active and a passive valve. It is produced by Geevo Co, which has own patent and brand. This ...
DN: 50 mm - 550 mm
Pressure: 600 bar
Temperature: 650 °C
... steam systems. Design: High-pressure weld-end gate valve with pressure-seal bonnet, forged body from carbon steel, non-rotation stem, wedge-type. Actuators: Hand wheel, electric, pneumatic, ...
Temperature: 300 °C
... industrial valves/flaps/dampers. MECHANICAL, PNEUMATIC OR ELECTRIC VALVE CONTROL In the case of smaller nominal widths, the valve blade is normally controlled ...
DN: 65 mm - 150 mm
This model is designed for installation in a flight conveyor line. Materials: Our samplers are made of austenitic stainless steel Standard materials (according to AISI): 316Ti and 321
DN: 50 mm - 1,200 mm
Pressure: 600,000 Pa - 1,600,000 Pa
Temperature: -40 °C - 600 °C
Knife Gate Valve Z673H series slip type pneumatic knife gate valve is a kind of important control valve in the plant production process. Switch controlling can be ...
Hunan Along New Energy Technologies Co., Ltd.
Diverter valves Sacchi can offer a complete range of diverter valves for pneumatic conveying. Every product and every pneumatic conveying technique requires ad ...
NetterVibration supplies different kinds of pneumatic valves to drive your vibrator at the optimal working sequence, improving your performance and reducing noise in your facilities. • The series MVI ...
DN: 8 mm - 18 mm
Pressure: 29 psi - 140 psi
Temperature: 130 °C
Air Valves reliably break the vacuum created when molding deep draw parts, such as containers and buckets. Specifications:• Pressure Required: 29-140 psi• Maximum Mold Temperature: 265 ̊F (130 ̊ C
Pressure: 14 bar
Temperature: 49 °C
Flow rate: 5 ft³/min - 35 ft³/min
With the Hankison By-Pass Valve you can service your system components and still use the system. The By-Pass Valve eliminates the expensive installation costs and space limitations of conventional three ...
Please specify:
Help us improve:
remaining