... factors such as the flow conductance and leak-tightness of valves are of great importance. The valves of Leybold are optimized with regard to these demands. For every flange system there are a lot of ...
DN: 12.7 mm - 152.4 mm
Pressure: 50 bar
... guidelines). Up to 15° from the vertical axis for the 6” bonnet (not BS6364 compliant). Flow direction indicators (for valves with preferred flow direction) Highly visible arrows on body and bonnet top. “T” mark ...
HABONIM
DN: 8 mm - 100 mm
Pressure: 6 bar - 8 bar
Temperature: -20 °C - 80 °C
3 PIECES F/F BALL VALVE (58183) WITH ALUMINIUM PNEUMATIC ACTUATOR (50800)
DN: 8 mm - 80 mm
Pressure: 6 bar - 8 bar
Temperature: -20 °C - 85 °C
3 PIECES BW BALL VALVE (58192) WITH STAINLESS STEEL PNEUMATIC ACTUATOR (50802)
DN: 25 mm - 104 mm
PNEUMATIC SEAT VALVE, 2 WAYS (L SHAPE) - STAINLESS STEEL 316L
DN: 0.25 in
Pressure: 0 bar - 400 bar
Flow rate: 8, 4, 2 l/min
Valve is controlled by compressed air acting on piston in the cylinder. Valve is kept open by the spring force. When pilot pressure is applied the valve ...
DN: 25 mm - 200 mm
Pressure: 10 bar - 40 bar
Temperature: -60 °C - 400 °C
Ball segment valve with precise sealing function due to the eccentric technology reliable tightness in the closure due to permanent pressure in the seat (valve closes without stop), opening of the full ...
GEFA Processtechnik
DN: 6 mm - 200 mm
Pressure: 16 bar
Temperature: -20 °C - 160 °C
SISTO-C ● Soft-seated shut-off valve ● Unique design with enclosed diaphragm ● Diaphragm with spiral support starting with size MD65 ● With manual or pneumatic actuator ● Shut-off and sealing to ...
SISTO Armaturen S.A.
Pressure: 0 bar - 20 bar
Temperature: -20 °C - 160 °C
SISTO-CY ● Soft-seated shut-off valve ● Unique design with enclosed diaphragm ● Diaphragm with spiral support starting with size MD65 ● With manual or pneumatic actuator ● Shut-off and sealing to ...
SISTO Armaturen S.A.
DN: 6 mm - 100 mm
Pressure: 0 bar - 20 bar
Temperature: -20 °C - 160 °C
SISTO-CM1200 ● Multi-port valve ● Unique design with enclosed diaphragm ● Diaphragm with spiral support starting with size MD65 ● With manual or pneumatic actuator ● Shut-off and sealing to atmosphere ...
SISTO Armaturen S.A.
... juice production, with TORK hygienic actuators human helath is under control. Technical Features Max. Air Pressure: 700 kPa (7bar) Min. Air Pressure: 400 kPa (4bar) Temperature Range: -25C, +90C Body ...
SMS-TORK
Pressure: 16 Pa
Temperature: -10 °C - 180 °C
... Type - : Pneumatic Actuated Angle Seat, Piston Valve Connection - :Screwed G (BSP) , 1/2"...2" Function - : Normally Closed Working Temperature - :-10 … +180°C Max. Operating Pressure: 16 bar Recommended ...
SMS-TORK
Pressure: 16 bar
Temperature: -10 °C - 180 °C
3/2 Way pneumatic piston valves . Connection : 1/2"-2"
SMS-TORK
DN: 0.125 in - 1 in
Pressure: 0 bar - 15 bar
Temperature: -10 °C - 50 °C
Wall clamping screws FRL1 M4x14 FRL2 M5x18 FRL3 M6x20 Fluid Compressed air. Assembling position Vertical
DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 220 °C
Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. Applications - Air for aeration in wastewater ...
DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 180 °C
Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. For : Air for aeration in wastewater treatment ...
DN: 0.5 in - 2 in
Pressure: 0.8 bar - 10 bar
Temperature: -10 °C - 180 °C
... Operator Port Connections. More Number Of Gland Packings At Valve End & Operator End For Longer Life. Operator With Threaded / Namur Ports. Lubricated Pilot Air Not Necessary. Applications: Air ...
DN: 0.5 in - 3 in
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 180 °C
Pressure Range(Bar): Normally Close -Above P lug : 0-25 | Below plug : 0-25Normally Open : 0-25Universal - Above plug : 0-25 | Below plug : 0-16 Orifice Size (mm): 12 Port Connection: 1/2" MOC: CF8 (SS304 Cast) | CF3M (SS316L Cast) ...
DN: 0.25 in - 1 in
Pressure: 0 psi - 5,000 psi
Temperature: 70 °F - 1,200 °F
... other exotics with various trim sizes for every valve measure and incorporate an exact precise control. It is available in globe, angle, 3-way, sanitary, and cryogenic designs. This valve comes with pneumatic ...
DN: 8, 6, 4, 10 mm
Pressure: 0.2 MPa - 1 MPa
Temperature: 0 °C - 60 °C
Industry's First! It enables same control as the cylinder with shock absorber. (Patent no. 5578502) Shock absorber is not required. Two-stage exhaust flow rate adjustment is realized. By using 2nd stage exhaust speed to be as cushion ...
NIHON PISCO CO., Ltd.
DN: 3 mm - 12 mm
Pressure: 0.1 MPa - 1 MPa
Temperature: 0 °C - 60 °C
Flow rate can be set with indicator. Reducing the task of initial flow settings or their maintenance / replacement. The scales are on the side (upper / lower) and the top. Flow rate is proportional to the knob turns. 2 types with ...
NIHON PISCO CO., Ltd.
DN: 12, 10, 8, 6 mm
Pressure: 0.1 MPa - 0.7 MPa
Temperature: 0 °C - 60 °C
Large-flow type Speed Controller for driving device. Best suitable for high-speed operation cylinder. Large-Flow type with same size as Speed Controller series. For price options, please contact our distributor near your office. ...
NIHON PISCO CO., Ltd.
DN: 15, 20, 25 mm
Pressure: 42 bar
Temperature: 400 °C
... vent valves are designed to drain (blowdown) or vent (depressurize) pipework, steam traps, valves and others. BDV – Blowdown valves – Manual discharge of strainer screen contents and ...
VALSTEAM ADCA Engineering S.A.
DN: 0.5 in - 4 in
Pressure: 43.9, 50, 36.9 bar
Temperature: -10 °C - 350 °C
... series of single seated, two-way globe control valves designed for simple process engineering and industrial applications with non-critical operating conditions. These valves can be assembled with pneumatic, ...
VALSTEAM ADCA Engineering S.A.
DN: 15 mm - 200 mm
Pressure: 40, 16 bar
Temperature: -10 °C - 400 °C
... series of single-seated, two-way globe valves designed for process engineering and industrial applications, where events such as erosion, cavitation or flashing may occur. These valves can be assembled ...
VALSTEAM ADCA Engineering S.A.
DN: 0.125 in - 1 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C
Series of quick exhaust valves in nickel-plated brass and in stainless steel
DN: 15 mm - 65 mm
Pressure: 0 bar - 10.2 bar
Temperature: 0 °C - 180 °C
Description Compact positioner with analogue control. Compressed air for remote control necessary. The stroke is made proportional to the flow through the paraboüc contour of the piston. The valve shuts ...
Pressure: 0 bar - 40 bar
Temperature: 95 °C
Externally controlled valve for the hydrogen sector Valves for hydrogen and oxygen in electrolyser operation Pneumatically operated 2/2-way valve - Direct pressure ...
DN: 0.375 in - 2 in
Pressure: 10 bar
Temperature: -20 °C - 150 °C
... Coil: The solenoid valve has an electromagnetic coil wrapped around a ferromagnetic core. When an electrical voltage is applied to the coil, it generates a magnetic field around the core. Armature or piston: Inside the ...
DN: 0.375 in - 2 in
Pressure: 10 bar
Temperature: -20 °C - 150 °C
... monitor and adjust the valve position as needed. Fluid Flow: When the engine opens the valve, fluid can flow through the valve opening. The size of the opening can be adjusted continuously ...
DN: 25.4 mm - 101.6 mm
Pressure: 0 bar - 0 bar
Temperature: 20 °C
Pneumatic butterfly valve Size:1"-4" Clamp-type pneumatic butterfly valve criteria: DIN, SMS, ISO, 3A, IDF, RJT Clamp-type pneumatic butterfly ...
Wenzhou Lihong Machinery TECHNOLOGY Co., LTD
DN: 15 mm - 50 mm
Pressure: 0.4 MPa - 0.7 MPa
Temperature: 0 °C - 135 °C
Sanitray Stainless Steel Pneumatic Diaphragm Valve Tank bottom diaphragm valve standard: flange, clamped, threaded, welded Tank diaphragm valve material: SS304, SS316L Size: ...
Wenzhou Lihong Machinery TECHNOLOGY Co., LTD
DN: 25 mm - 100 mm
Standard: DIN, SMS, ISO, 3A, BPE, BS Material: AISI304, 316 or AISI316L Application: Dairy, Food, Beer, Beverage, Pharmaceutical and other industrial fields Other: Inner and external surface machinery polishing, RA = 0.4-0.8um
Wenzhou Lihong Machinery TECHNOLOGY Co., LTD
Pressure: 1.2 bar - 10 bar
Flow rate: 0 l/min - 300 l/min
AWF
Pressure: 13 bar - 50 bar
Temperature: -29 °C - 204 °C
AWF
Pressure: 3 bar - 35 bar
AWF
DN: 4, 6 mm
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 150 °C
... Venturi effect with adjustable spout by means of a knurled ring nut Activation Pneumatic: the aspiration of the liquid happens at flowing of the air throughout the valve Materials ...
At ARIS, you receive high-quality electrical and pneumatic actuators and robust industrial fittings. We supply individual products for self-assembly or replacement drives and accessories. Of course, ...
DN: 15 mm - 150 mm
Pressure: 2 bar - 40 bar
Temperature: 250 °C
GESTRA control valves V 701 with electric or pneumatic drive For the open and closed-loop control of gas, steam and liquid up to 250 °C. The directly mounted positioner used with the pneumatic ...
DN: 0.125 in - 0.75 in
Pressure: 2 bar - 10 bar
Temperature: -20 °C - 80 °C
Quick Exhaust Valve This valve can easily vent the circuit in case of an air supply failure. If assembled on the cylinder port, it increases the cylinder speed. DATASHEET Recommended ...
DN: 0.125, 0.25 in
Pressure: 0 bar - 8 bar
Temperature: 0 °C - 70 °C
... installée! in a pneumatic circuit, the pressure control sets the working pressure of ail the connected components. The pressure adjustment will be thereby kept steatfy for a long time. h can also be used as an economuer ...
DN: 0.125 in - 0.5 in
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 70 °C
The valve is used to section a pneumatic installation. Sliding the sleeve on the rod. both ON and OFF positions can be achieved. When the sleeve is against the rod hexagon. the flcw goes in the arrcw ...
DN: 20 mm - 63 mm
Pressure: 10 bar
• Materials -PVC-U, PP • Together EPDM, FPM • PN10 • Step of the ball in T or L • Hand lever or with pneumatic actuator or with electric motor 230V / 24V • Gluing, soldering or socket connections, with DIN / ANSI ...
DIVATEC,SL
DN: 15 mm - 50 mm
... with fluids with small solids without dead spaces in the ball • PVC-U, PP-GF • Possibility of pneumatic actuator DA, NC or electric motor 230V / 24V Ball valve completely injected in one piece, very ...
DIVATEC,SL
DN: 65 mm - 150 mm
Pressure: 16, 10 bar
... aggressive liquid or gaseous media if the valve components that contact the media are resistant to the service temperature according to the Divatec resistance list. This model can also be automated with electric or ...
DIVATEC,SL
SMBA PNEUMATIC MODEL based on SMB The gear transmission mechanism inside of unit is based on that of the SMB model. Air motor is driven and operated by a supply of air, and SMBA is ideal for use in ...
DN: 63 mm - 110 mm
BASIC HYDRAULIC VALVE Hydraulically or Pneumatic operated. TYPICAL APPLICATIONS Irrigation, water treatment, animal feeding plants.
DN: 63 mm - 110 mm
HYDRAULIC MANUAL VALVE Hydraulically or Pneumatic operated. TYPICAL APPLICATIONS Irrigation, water treatment, animal feeding plants.
Please specify:
Help us improve:
remaining