Weir Power & Industrial valves

DN: 15 mm - 100 mm
Pressure: 63, 50 bar
Temperature: -20 °C - 160 °C

Shut-off valve is made of three stainless steel parts with floating precision ball. The valve is operated pneumatically (double- and single-acting) and is characterized by a long service life and high ...

DN: 15 mm - 65 mm
Pressure: 2 bar - 16 bar
Temperature: -10 °C - 180 °C

... Repeatability: < 1.0% FS Failsafe: valve closes (NC) in the event of voltage failure, optionally outlet fail freeze feature Control_valve_body: bronze, optionally SST 316L Cone_seal: PTFE Proportional_valve_body: ...

DN: 15 mm - 500 mm
Temperature: -29 °C - 500 °C

Metaltite® metal seated ball valves have excellent sealing characteristics suitable for various fluids services with a wide range of operating temperatures Clean fluids, dirty fluids, high viscosity, scaling fluids, ...

DN: 50, 25, 40, 16 mm
Pressure: 5 bar - 7 bar
Temperature: 200, 50, 250, 80 °C

The compact mini UHV gate valve featuring a modular actuator concept is well suited for industrial and R&D applications. It is often used in pipings of semiconductor process systems.

DN: 0.5 in - 0.75 in
Pressure: 172 bar - 207 bar

... Adjustable flow control valve. AFD series Applications Dependably adjust and maintain a constant flow downstream from the valve with Cross flow control valves. Using the lever and ...

... such as downstream valves and controllers, upstream valves and controllers, vacuum isolation valves and integrated solutions. MKS manufactures downstream pressure control subsystems ...

DN: 1.8 mm
Pressure: 1 bar - 8 bar
Temperature: 5 °C - 180 °C

Features ・This solenoid diaphragm valve employs a unique mechanism to absorb the dimensional changes of the plastic body caused by temperature changes. No leakage with high temperature fluids. ・Most suitable for the ...

DN: 40 mm - 300 mm
Pressure: 10 bar - 16 bar

DN 40 - 300 PN 10 - 16 Body: EN-JS1050 Coating: Epoxy Resilient-seated gate valves according to European standard EN 1171 with straight, smooth and non-constricted passage. Internally enamel, externally EKB. For water, ...

DN: 10 mm - 300 mm
Pressure: 40 bar
Temperature: -271 °C - -30 °C

... desert or cold conditions) Essential product features: - Available as globe, control or check valve and filter with stem extension - Cryogenic valve suitable for medium temperatures ranging from ...

DN: 3 in - 5 in

... area series of butterfly air intake shutoff valves are ATEX approved for Zone 1, Gas Group IIB, T4 or Zone 21 hazardous area applications. The 12 and 24VDC valves are designed with “fail safe” actuation. ...

DN: 15 mm - 250 mm
Pressure: 16 bar - 40 bar
Temperature: -5 °C - 200 °C

The new KLINGER ball valve Monoball KHO is fully welded and generally used in the sector district heating, heating- and air conditioning and plant construction. The product is durable, functional, maintenance-free and ...

DN: 0.375 in - 0.75 in

... Lever Manual Valves 31 Series are hand controlled poppet valves, for the control of single or double-acting air cylinders. These valves are offered with horizontal or vertical hand lever, ...

DN: 5 mm - 16 mm
Pressure: 0.5 bar - 10 bar
Temperature: -10 °C - 70 °C

... seals: NBR Valves in accordance with 2014/34/EU (ATEX) available. (Chapter 13) A quick exhaust valve is used to increase the speed of a pneumatic cylinder. The flow from the control valve ...

DN: 0.5 in - 2 in

Lead Free Bronze RS Gate Valve with Press Connections, 200 CWP, Sizes: 1/2" to 2"

The actuator pilots of the OS Series are especially designed for pressure control in regulators and shutoff valves, they can operate on maximum and minimum pressure, on maximum only, on minimum only.

DN: 0.5 in - 3 in

Series CSM-61 Flow Measurement Valves monitor system flow in low to medium flow rate HVAC units providing a highly accurate flow measurement. It consists of bronze body construction with bi-directional, positive shutoff ...

DN: 0.5 in - 2 in
Temperature: -10 °C - 180 °C

Media: water, oil, air, aggressive media and steam(1) Media temperature: -10°C … +180°C Ambient temperature: -10°C … +60°C Pilot media: air, inert gases, water Body material: bronze (CC491K EN 1982 : 2000) Bonnet material: brass (CW617N ...

Temperature: 425, 325, 530, 200 °C

•Z40H—150Lb Temp.：≤425℃ Supply for ：Steam, water ,oil etc non corrosion medium •Z41H 1.6C-16 Temp.：≤325℃ Supply for ：Steam, water ,oil etc non corrosion medium Z41Y •Z41Y1.61-161 Temp.：≤530℃ Supply for ：Steam, water ,oil ...

Pressure: 50 bar - 1,200 bar
Flow rate: 50 l/min - 600 l/min

... Dimensions: 321x110x110 mm •Weight: 17.8 kg SPECIFIC FEATURES •Bypass valve •Consumer shut-off valve

DN: 8 mm - 80 mm
Pressure: 64 bar

Investment casting, hexagon, reduced bore, with lever. Parallel BSP thread to DIN/ISO 228 Housing and ball made of 1.4408. Sealing material PTFE, for screw pin to DIN 3852 Part 2 Form A. We reserve the right to alter dimensions.

DN: 10 mm - 100 mm
Pressure: 16, 10 bar

• Threaded seal-carrier for upstream maintenance without emptying the system. • Handle built-in tool for easy adjustment of the threaded seal-carrier (and ball torque). • “Antiblock” system that avoids ball blockage. • 100% factory ...

Special valve that lets the first delivered compressed air escape so that the compressor will start more easily. Is mounted on the non-return valve.

DN: 0.125, 0.25, 0.18 in
Pressure: 10, 160, 300 bar
Temperature: -20 °C - 80 °C

The PVB Divider Valve is designed for small-size series progressive lubrication systems. It is a cost efficient solution for supplying multiple lubrication points with relatively small volumes of oil and grease. For ...

DN: 25 mm

... and closes when the coil is de-energized. A vent in the valve body relieves trapped gas when the valve closes. A pop-out indicator button informs you when the valve is open or closed. The ...