Weir Power & Industrial valves

... position seats are protected from the medium robust and simple design zero leakage valve top entry design (work on a valve can be done with valve still installed) ...

... water valves, micro-valves, magnetic valves, mechanical valves, pneumatic valves. Check valves are available with various connections ...

DN: 50 mm - 1,200 mm

Kolk gate valves are made of ductile iron GJS-400/500 (DIN1693 GGG-40/50). Designed acc. to EN 1074-2 (DIN 3352-4) and EN 1171, flange drilling acc. to EN 1092-2 (ISO 7005-2). Face to face acc. to EN 558-1 (DIN 3202-1 ...

DN: 2 cm - 3.5 cm

• Lower permeability and pressure loss compared to elastomer valves • High system safety and chemical resistance • Maximum residual drainage and reusability due to better gas tightness • Long and position-independent ...

IVEK’s Ceramic Liquid Valves offer a durable high-performance alternative to “plug valves” commonly used in instrumentation Traditional polymer valves have a limited life due to material ...

DN: 65 mm

The water stop valve is used to stop water of fire hose, controlled by ball valve, easy to operate with its strong practicality, light weight. It can block the water flow quicky when the fire hose bursts, ...

DN: 1, 2 in
Pressure: 2,500 psi
Temperature: 260 °C

... service time, thanks to top entry design and easy-to-service-seat Design offers choice of angle and globe valves Standardised 1" and 2" valves with variable trim options Choice of materials for body, ...

Pressure: 140 MPa

... sériés of globe valves are mainly composed of valve body, valve core, adjusting rod, handwheel, etc. The valve body is made of steel forging, with nickel plating on the ...

... Rotolok manufactures a stock range of round and square outlet valves 165, 215, 265, 320, 370 and 420mm, mainly to match Screw Conveyor outlets, a full range of standard and heavy duty valves are made ...

DN: 1 in - 4 in
Pressure: 10,000 psi - 20,000 psi
Temperature: -29 °C - 121 °C

Plug Valve is an important high pressure part for well service to allow and stop flow by plug rotation. Jereh plug valves are made from premium alloy steel, with special coating and heat treating ...

DN: 0.5 in - 8 in
Pressure: 0 bar - 20 bar
Temperature: -50 °C - 250 °C

Split body • Full Bore • Anti blow out stem • Autoadjustable packing • Self-relief seats • Low emission design Standards • Designs: ANSI B16.34 ISO17292 API6D • Face ...

DN: 40 mm - 300 mm
Pressure: 10, 16 bar
Temperature: 60 °C

Dueker gate valves – for water and gas.Reliable, safe and cost-effective. Dueker gate valves are used to great effect all over the world. There is a good reason for this – valves have ...

DC24V Al-Alloy Material on-off electric butterfly Valve, electric actuator with Ce/CSA/RoHS Certificate Features: Name: On-off Electric Butterfly Valve Standard Time/Torque: 20S/50Nm Motor Power: ...

Pressure: 24.5, 245 bar

... Clamptek CSV hydrulic sequence valve is designed to provide reliable and exceedingly efficient performances. The masterful design has been patented and its high quality is endorsed by its loyal and expanding customer ...

PTFE high vacuum valve The properties of high vacuum and PTFE rubber O-rings at the top could arrive at the perfect effect of high vacuum and corrosion resistance. PTFE high vacuum rod with PTFE rubber O-ring YZ0501 ...

DN: 40, 50 mm

... Product name:butterfly valve - Body material:HDPE Connection:HDPE - Type:Normal Close - Certificate:ISO9001 Thread :S60*6,NPS thread can turn into 2”1”1/2”3/4 Butterfly valve No.2 ----Aluminum ...

Depending on the version, the 5A venting valve is suitable for venting harmless gases, for drawing off aggressive media or for special drainage on manifolds. Important for the application: The valve is ...

The Pneumatic Flange Ball Valve is a a single-acting/double-acting valve composed of cast steel, WCB, and stainless steel. The actuator cover is made of aluminum alloy, and it has nominal dimensions of ...

DN: 5 mm - 38 mm
Pressure: 350, 400, 500 bar
Temperature: -20 °C - 100 °C

Body, Connecting Parts, Ball and Stem Stainless Steel, V4a (AISI 316) Each PH ball valve is subject to an inspection for resistance, sealing and special characteristics. Inspection control certificates 3.1 B or 3.1 ...

DN: 10 mm - 100 mm
Pressure: 0 bar - 160 bar
Temperature: -20 °C - 220 °C

Large Flux, low resistance, no water hammer. Y type shape enlarged the flowing section, which could raise the flux by %30 and make flow more smooth. Super long working life, which help the stem adjust and lubricate itself automatically. ...

DN: 0.5 in - 2 in
Pressure: 0 bar - 7 bar
Temperature: -10 °C - 80 °C

Description 2/3-way valve Impulse without differential pressure Body Stainless Steel, Red brass

DN: 6 in - 8 in
Pressure: 300, 750 psi
Temperature: -46 °C - 240 °C

Trunnion ball | Soft seated | Full bore | Bidirectional Fire safe design | Antistatic design Live loaded stem packing Double encapsulated body sealing ISO 5211 top works for automation Anti blowout stem Self relieving seats Optional ...

DN: 25 mm - 600 mm
Pressure: 0 bar - 16 bar
Temperature: -30 °C - 200 °C

... seats of double eccentric high performance valves today,butterfly valves are used from basic water applications to industrial applications and highly corrosive severe service applications    Butterfly ...

DN: 6.35 mm - 25.4 mm
Pressure: 300, 350 bar
Flow rate: 200, 120, 60, 90 l/min

4 ways inverter valve, cast iron painted body. Zinc plated stem. Available in 1/4 – 3/8 – 1/2 – 3/4 – 1G both open and closed center.

DN: 0.25 in - 8 in
Pressure: 150 psi - 4,500 psi
Temperature: -254 °C - 1,038 °C

The HI-100® Control Valve features an in-line Straight-thru, venturi flow design. The control element, a spherical ball, is contained by a cage that positions the ball relative to the downstream seat by means of linear ...