Weir Power & Industrial valves

DN: 12 mm
Pressure: 0 bar - 40 bar
Temperature: 1 °C - 60 °C

Unblockable motorised ball valve drain The TEC-44 is a powerful timer controlled motorised ball valve, designed to remove condensate from deliquescent dryers, tanks, vessels and refrigerated dryers. The ...

DN: 1.411 mm
Pressure: 50 psi - 25,000 psi

... Pressures. Provide Air Signal. These valves perform a function similar to a pressure switch. The sensing piston or plunger movement is spring or air adjusted. When the sensed pressure is reached, a small, integral air ...

... Pneumatic Actuators for Remote Valve Operation Types Normally Closed – Air is required to open the valve Normally Open – Air is required to close the valve Double Action ...

... Directional Proportional Valve: The solution to pollution issues and the dangers correlated to the use of hydraulic oil. The new hydraulic and ecologic valve, called EXM1, has been developed and patented ...

DN: 15 mm - 350 mm
Pressure: 10 bar - 40 bar
Temperature: -50 °C - 650 °C

HIGH PERFORMANCE METAL SEATED BALL VALVES 1/2"-14" ANSI 150-900 Materials: 1.4408/CF8M, 1.0619/WCB, 1.4404/316L, 1.4308/CF8, 1.4571/316Ti, Duplex, Hastelloy, Monel Live load state of the art sealing system Floating ...

DN: 10 mm - 80 mm
Pressure: 25 bar - 40 bar
Temperature: -10 °C - 120 °C

Full bore FPM shaft “o” ring PTFE ball seats Brass valve BSP threaded Nominal pressure: - 1/4” to 1”1/4 = 40 Bar - 1”1/2 to 4”= 25 Bar Working pressure: see pressure / temperature diagram Temperature = -10°C +120°C

DN: 25 mm - 200 mm
Temperature: -200 °C - 600 °C

Neles series X modular ball valve, incorporates robust stem to ball connection in seat supported models. Application based seat selection assures valves are capable of delivering long lasting tightness. ...

DN: 10 mm - 25 mm

screw connection G 3/8” – G 1” DN10 – DN25 material specifications housing, not in contact with medium: POM plastic (polyoxymethylene), natural white threaded cover: POM plastic (polyoxymethylene), natural white srews: galvanized ...

SPECIFICATION PORT SIZE(PT,NPT): 1/4" ADJ.PRESSURE RANGE(kgf/cm2): 0.5~35 PROOF PRESSURE(kgf/cm2): 40 AMBIENT TEMP: 5-60 C GAUGE PORT(PT, NPT): 1/8"

Pressure: 250 bar
Temperature: -20 °C - 100 °C
Flow rate: 180 l/min

Monoblock and sandwich designs All types of circuit diagrams Integrated relief valves and optional flow regulator Max. flow rate 180 l/min Max. working pressure 250 bar

DN: 50 mm - 250 mm
Pressure: 10 bar
Temperature: 150 °C

The float valve is direct action device, the float or buoy is acting by the thrust of the fluid that finally is transmitted to the valve arm and closing seat. Valves are available in ...

Pressure: 0 bar - 18 bar
Temperature: -30 °C - 65 °C
Flow rate: 5 l/min

... until the setpoint pressure is reached, then the valve closes. The valve opens from P to A when the consumer pressure drops. If the setpoint pressure exceeds, the valve works as a pressure ...

DN: 450 mm - 1,400 mm
Pressure: 16 bar
Temperature: -180 °C - 650 °C

Ball valves are often subjected to extreme conditions, especially when used in pipelines. To withstand even the highest loads, Böhmer ball valves are therefore welded through the entire cross-section. ...

Pressure: 6 bar

The EBL wolf-mouth valve is used at the outlet of storage silos for the extraction of spray dried products.

DN: 65 mm - 200 mm
Pressure: 20.7 bar - 41.4 bar
Temperature: 120 °C

... +120°C. • Factory installed UL listed double tamper switch for indoor and outdoor use. • Universal wafer type butterfly valve for connection to ANSI B16 Class 125, ISO 2084/Din 2501 PN16& BSEN 1092 PN 16.

Pressure: 0 psi - 145 psi
Temperature: -20 °C - 70 °C

1、Exhaust outlet locates over the body, which is convenient to install muffler to decrease noise and pollution; 2、The external force required by direction-change of series of M5B, M5R and M5L is provided by external mechanism, which ...

DN: 30 mm - 1,000 mm
Pressure: 40, 63, 100 bar

Middle and low pressure valves The standard line of VAPTECH Spherical valves is designed for diameter range from 300 to 1000 mm and pressure ratings 40, 63 and 100 bar. The valve ...

DN: 0.125 in
Pressure: 21 bar

The DV-09 valve is an air-operated, adjustable needle valve. It is designed to apply precise, repeatable deposits from a fraction of a microliter up to continuous stripes of low to high viscosity fluids.

DN: 0.25 in
Pressure: 0 bar - 10 bar
Temperature: -60 °C - 80 °C

... product range includes: Filter Regulators Filters Volume booster Lock-up valves Unidirectional and bidirectional flow regulators Quick Exhaust valves Shavo's Lockup Valve retains ...

DN: 15 mm - 150 mm

FEATURES & BENEFITS Class 150 to Class 2500 Size Range ¼” thru 10” (Class Dependent) Full and Reduced Bore Body Wall Thickness ASME B16.34, Forged or Cast Versions End Connections: SW, BW, RF, RTJ, NPT, BSP, Special Fire-Safe Design ...

Product Feature - Excellent Flow Characteristics, High sensitivity and easy to adjust. - Proline flow control regulators with polymer, nickel-plated brass or métal bodies, external or recessed adjustment screws, offer fine adjustment, ...

Low-load start-up control valves supply the boiler with the required quantity of feedwater during start-up (30–50% of the water required for full-load operation), regulated by volume, at higher pressure differences than ...

DN: 0.5 in
Pressure: 0 bar - 16 bar
Flow rate: 0 m³/min - 60 m³/min

Mechanical Float Drain Valve FD work without loss of compressed air. A FD floating trap is the most effective of all solutions to the conclusion of the condensate system. It works without any loss of compressed air, ...

DN: 0.125 in - 1 in
Pressure: 400 bar
Temperature: 0 °C - 240 °C

PCI NNV4, NRPV, NGSV needle valve has high pressure line shut off feature. They feature instrument isolation, gauge isolation and drain valve. They can provide liquid and vapor service. All three ...

DN: 10 mm
Pressure: 320 bar
Flow rate: 400 l/min

3/2-way valve cartridge for electric, direct and pilot controls applicable. Connection: DN10