DN: 0.5 mm - 2 mm
Pressure: 30, 40, 65 bar
The RKE electric ball valve automatically opens or closes the compressed air tank via the control unit or connects and closes areas of the network from the compressed air supply as required. This prevents e.g. an unnecessary ...
Pressure: 0.5 bar
Maintaining pressure Pressure loss, inlet / outlet 0.5 bar Valve switching time: 15 ms IP rating 67
DN: 0.75 in - 1.5 in
Pressure: 0.3 bar - 8.6 bar
Temperature: -20 °C - 85 °C
... Diaphragm Valve BRD and BDV series are dust collector valves used specifically in dust collector and baghouse systems. The two chambers of the dust collector valves are connected together ...
... speed. Besides the proportional control valves we also offer standard control valves. You can choose between a hand control valve (HCV) or a remote control valve (RCV). ...
FLUSHING VALVE Flushing valve FLX constructed in cast iron, to be installed directly on the pump casing by means of a threaded coupling. This type of valve operates on the "Venturi" principle ...
Knife gate valves [SRP] in EN-GJL-250 cast iron with bronze blade seat for perfectly smooth travel even after long periods out of use. Flanges meet the UNI standards for perfect interchangeability with the pipelines of ...
Pressure: 100, 500, 1,000 bar
High-pressure valve In addition to the technical challenges in pressure generation, applications in high-pressure technology often require special high-pressure valves with the desired properties which ...
Pressure: 6, 10 bar
... provides you with an extremely compact and safe conveying device from a single source. On request, the Volkmann rotary valve is also available in a pressure shock-resistant version up to 10 bar and a pressure-resistant ...
DN: 0 mm - 0 mm
Pressure: 0 bar - 64 bar
Drain valve has been developed for manual discharging of condensate or any other non-aggressive fluid from compressed air(1) system. In order to prevent condensate from becoming re-entrained in the airstream we recommend ...
DN: 0 mm - 0 mm
Pressure: 0 bar - 420 bar
Temperature: -20 °C - 200 °C
Drain valve has been developed for manual discharging of condensate or any other non-aggressive fluid from compressed air(1) system. In order to prevent condensate from becoming re-entrained in the airstream we recommend ...
Pressure: 100, 63 bar
The ideal and reliable high-flow CO2 pressure reducing valve for use with CO2 gas or liquide.
Ball Valves & Check Valves for CNG refuelling - Ball Valves - Tank Head Valves - Air Torque Actuated Ball Valves - Sandwich Valves - ...
The Model 472A Spray Valve is an air-open/spring-closed spray valve available in brass or stainless steel. The valve features metering adjustment of output volume and a choice of air-cap ...
... 500S valve is solenoid operated for precise glue patterns at high machine speeds. the valve is used to atomize adhesive. The valve features a zero-cavity plunger/seat design to prevent ...
DN: 4 in
Details: Valve only 4” slide valve - aluminium body Dimensions: External Diameter - 4" - Information: Used with - X312 Material - Aluminium Weight (kg) - N/A
The Flow Block® allows the interception of steel pipes, ductile iron, cast iron and stainless steel from DN 3/4” up to DN 2" with interruption of service, the system is used in the following industries: > Gas > Water > District Heating > ...
DN: 0.25 in
Pressure: 350, 300 bar
Temperature: -20 °C - 80 °C
... additional valve block. Flow divider valve kit: main features Complete kit Additional block for flow divider valve Flow divider valve VDRF101 Oil port G1/4 15µm ...
DN: 40 mm - 300 mm
Pressure: 15, 11, 24, 17.6 bar
... parts of the gate valve are called the gate plate. The gate plate moves up and down and is perpendicular to the direction of fluid. The gate valve can only be fully opened and closed, not used for regulating ...
Tengxuan
DN: 15 mm - 250 mm
... Another important feature of the valve is that it is easy to adapt to the multi-channel structure, so that a valve can obtain two, three, or even four different flow channels.This simplifies piping design, ...
Tengxuan
Ball valve is evolved from the plug valve, its opening and closing pieces as a ball, using the ball around the axis of the stem rotation 90 degrees to achieve the purpose of opening and closing. The ...
Tengxuan
... Sample Valve (5157A Model): Ideal for general sampling, the standard sample valve can be quickly installed on the pipe line or container. The valve clamps into position. This enables ...
DN: 50 mm
Temperature: -26 °C - 240 °C
... 2” access fitting. The valves have a bleed valve located on the non-process side of the ball. This bleed valve may be used to drain the retrieval tool, sample process, or be used ...
... control abrasive valve uses ultra-wear-resistant composite materials, long life, easy flow adjustment, can spray steel shot, steel sand and other large materials. During sandblasting operation, a control signal is sent ...
Pressure: 16 bar
Temperature: -20 °C - 40 °C
Outlet valve for gas cartridges • Adjuster for metallic gas cartridges • according to DIN EN 417:2012 • outside thread M 10 x 1 • CE-0085CQ0255
Pro-Fill Valve is a standard valve designed for golf cart battery watering applications or any other battery watering applications in enclosed spaces.
DN: 0.5, 0.25, 0.75 in
Temperature: -20 °C - 50 °C
Opening / closing system: The most frequent application of these valves is in installations where the flow is interrupted regularly. Valve design: Needle valve Maximum nominal pressure: ...
DN: 19 mm - 24.5 mm
Pressure: 25 bar
Temperature: -20 °C - 50 °C
Opening/closing system: The most frequent application of this valve is in installations where the flow is interrupted regularly. Valves for pressure gauges
... shredder can be used upstream, in order to break up the chips to an extractable quality. Site of operation: - As a shut-off valve in the chip suction pipe system Weight: - ca. 20 kg Dimensions L x W x H: - 790 x 230 ...
The vacuum suction unit conducts the shredded chips via a worm conveyor to an intake port connected to the suction system. The vacuum suction unit is normally mounted downstream of the discharge conveyor of a machine tool. As an option, ...
DN: 20 mm
... accessory for valves manufactured by Aplisens. It is constructed using 316 stainless steel. This needle valve operates with a medium temperature. Order codes for VM-1 are 1/M, 1/G, 1/graphite and 1/oxygen. ...
DN: 12, 14 mm
One kind of fitting accessories is a needle valve VM-1-R7R with 316ss materials used. This product can operate in medium temperature and it works on pressures. It has no vent port and is packed by graphite. It can be ...
Pressure: 100 bar
Temperature: 80 °C
The ball valve is manufactured from H17N14M2 grade material, which is equivalent to 316 stainless steel. Maximum temperatures of the medium should not be more than 80 degrees Celsius. The maximum working pressure is 100 ...
... expensive and complicated split butterfly valves or the old-fashioned Cone Valve technology with their expensive proprietary IBCs. SoliValve® is much more than another Cone Valve system. ...
Valves play an important role throughout the pharmaceutical, food, chemical and allied industries. Valves play an important role throughout the pharmaceutical, food, chemical and allied industries. ...
Please specify:
Help us improve:
remaining