- Hydraulics - Pneumatics >
- Valve >
- Valve >
- Weir Power & Industrial
Weir Power & Industrial valves
DN: 40 mm - 500 mm
Pressure: 25 bar
Temperature: -50 °C - 150 °C
GEA butterfly Valves are suitable for installation in the refrigerant cycles of industrial refrigeration systems. The closing device is a disc that opens and closes the pipe by horizontal rotation in relation to the flow ...
Grasso International
DN: 6 mm - 300 mm
Pressure: 0 bar - 27.6 bar
Temperature: -50 °C - 204 °C
... style valves in the Tee body configuration and in angle style bodies. Valves are available with either hand wheel or seal cap. These caps are exclusive to this series of valves and should ...
Parker Refrigerating Specialties Division
Pressure: 0 bar - 350 bar
Temperature: -20 °C - 50 °C
Flow rate: 320 l/min - 1,900 l/min
... DFplus pilot valve and a main stage with poppet and LVDT. With the DFplus pilot valve the TDP achieves extremely fast response times: from 10.5 ms (NG25) up to 28 ms (NG100) with an accuracy of <0.1 ...
DN: 32, 40, 50 mm
Pressure: 16 bar
Temperature: -10 °C - 180 °C
... durability in steam and aggressive applications • Valves meeting Pressure Equipment Directive 97/23/EC • Mountable in any position • Tight shut-off and Long Service Life • Parker Angle Seat Valves ...
Parker Fluid and climate Controls Europe
DN: 15 mm - 250 mm
Pressure: 23.8 bar - 40 bar
Temperature: -10 °C - 400 °C
... control, flanged connections according to EN1092-1 PN 40 with prominence. Streamlined flow valves, Streamlined flow valves bellows type, Streamlined flow valves bellows type on carbon ...
Mival
DN: 100, 150, 125, 200, 160 mm
Description Valve for exhaust air. Designed for wall or ceiling mounting. Bayonet holders connect to socket VRGU, VRGL, or VRGM.
LINDAB
Pressure: 95, 90, 85 psi
Flow rate: 7 ft³/min - 15 ft³/min
Extreme temperatures, hot or cold, can contribute to extreme fatigue. Clemco air-flow/air-comfort devices help operators stay focused and comfortable in their Apollo 600 or 20 HP Respirators while working in extremely hot or cold temperatures, ...
DN: 8 mm - 300 mm
Pressure: 63 bar
Temperature: -10 °C - 200 °C
Ball valve to ANSI/ASME with threaded ends (NPT), butt weld or socket weld ends, three-piece body, full bore, floating ball. Plastomer sealing (also in fire-safe design). Main Applications General industry ...
KSB
Pressure: 3.5, 1.5 bar
Temperature: -20 °C - 100 °C
• Made of stainless steel with large free cross section and sealed gate blade • For installation between two flanges in gravity pipes at up to 1.5 barg (FUS) and 3.5 barg (FUH) • Low construction height - Application Suitable ...
DN: 15 mm - 350 mm
Pressure: 25 bar
Temperature: -10 °C - 350 °C
Bellows-type globe valve to DIN/EN with flanged ends, with on/off disc or throttling plug, standard position indicator with colour coding for identification of valve design, replaceable valve ...
KSB S.A.S. - France
DN: 0.5 in - 2.125 in
Pressure: 680, 700 psi
Temperature: -40 °F - 240 °F
Parker-Sporlan’s CDS valves are stepper motor actuated electric valves intended for use in direct expansion refrigeration and air conditioning applications. CDS valves are suited for ...
Parker Sporlan Division
DN: 0.5 in - 3.15 in
Pressure: 700 bar
Temperature: -40 °C - 150 °C
Parker's Isolation Ball Valves are designed for use on Air Conditioning and Refrigeration units. They ensure positive shut off refrigerant flow in either flow direction, even during system evacuation. The Sporlan Ball ...
Parker Refrigeration & Air Conditioning
DN: 3.35, 4 in
Pressure: 0 bar - 517.1 bar
Temperature: 0 °F - 250 °F
Rotary Systems’ timing valve is designed for applications that require automatic clamping and unclamping. This timing valve eliminates the need for a control valve or solenoid valve. ...
DN: 0.125 in - 0.75 in
Pressure: 414, 1,035, 690 bar
Temperature: -40 °C - 121 °C
... ®, CTFE Valve Stem 17-4 Stainless Steel Remaining Parts -316 Stainless Steel, Brass Flow CapacityVA Series -Valve: Cv = 0.75 -VG Series Valve: CV = 2.0 Weight (approximate) -VA ...
Emerson Automation Solutions - TESCOM
DN: 19, 30 mm
Pressure: 30 mbar - 5,500 mbar
Temperature: -20, -30, 66 °C
The Type VS100 slam shut is constructed in such a way that it shuts off the gas flow to the downstream system when the outlet pressure goes above or declines below the predefined levels. Type VS100 slam shut has a ductile iron and ...
FISHER REGULATORS
DN: 0.125 in - 0.5 in
Pressure: 35 psi - 130 psi
Temperature: 0 °F - 160 °F
Soft-start valves allow pneumatic components to be pressurized slowly for safety and control. MGV series soft-start valves are available with port sizes from 1/8" NPT to 1/2" NPT and either 24 VDC or ...
Bimba
Pressure: 0 bar - 8 bar
Flow rate: 1,600, 350 l/min
... bar (vacuum version available) High pressure control stability The piezo-controlled proportional valves of the Tecno series are 3-way pressure valves and have an integrated electronic pressure control ...
HOERBIGER Automatisierungstechnik GmbH
DN: 0.25 in
Pressure: 3 bar - 10 bar
Temperature: -10 °C - 50 °C
... the adjustment needle valve. The piston opens the main valve when the downstream side of the valve reaches approximately 60% of the supply pressure. The ramp up time to reach the switch-over ...
Parker Pneumatic Division Europe
DN: 2, 3, 1 in
Pressure: 15,000 psi
... premium quality plug valves offering for a wide range of well drilling production&well-servicing applications. Available the range in size1”ro 3”&pressure rating upto 15000psi. Other valve products, such ...
Haimo Technologies Group Corp.
DN: 15 mm - 50 mm
Pressure: 25 bar
Temperature: -15 °C - 200 °C
Special features • - Consisting of single-seated globe valve and actuator • - Flanges or male thread connection and welding or threaded ends or female thread connection Accessories • - Type 2 NI Strainer Options ...
SAMSON
Pressure: 400 bar
Temperature: -20 °C - 90 °C
Flow rate: 250, 180, 400 l/min
The KLSV is a series of flow-sharing, load-sensing main control valves for multifunction construction machinery. Their low hysteresis and excellent pressure drop characteristics provide superior performance and efficiency. > ...
Kawasaki Precision Machinery
DN: 6 mm - 16 mm
Ventilation elements Air valve, pneumatically activated Air Valve
Pressure: 15,000, 10,000 psi
Temperature: -18 °C - 204 °C
... style ball and stem that eliminates the possibility of ,,stem-turnout,, common with other valves designed for similar service. In addition, these specialty ball valves have re-torqueable seat glands that ...
Watts Fluid Air
Pressure: 4 bar - 6 bar
Jet Edge’s patented Dual Pressure Valve is a remotely mounted valve that allows waterjet operators to control water pressure independently of the intensifier pump. This enables operators to run a number ...
Temperature: 5 °C - 150 °C
Series XLA-2 are high vacuum angle valves for use in industrial applications employing high vacuum and process gases. Common industries that may use these angle valves include semiconductor, solar and ...
SMC Corporation of America
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining