Weir water valves

DN: 20 mm - 800 mm
Pressure: 2.5, 1, 1.6 MPa
Temperature: 80 °C

Float Control Valve Shell test pressure: 1.5, 2.4, 3.75MPa Sealed test pressure : 1.1, 1.76, 2.75MPa Suitable medium: water, Sewage Materials: Serial No. - Part - Material 1 - Seat - Cast ...

... Pneumatic Actuators for Remote Valve Operation Types Normally Closed – Air is required to open the valve Normally Open – Air is required to close the valve Double Action ...

DN: 25 mm - 200 mm
Temperature: -200 °C - 600 °C

Neles series X modular ball valve, incorporates robust stem to ball connection in seat supported models. Application based seat selection assures valves are capable of delivering long lasting tightness. ...

DN: 50 mm - 250 mm
Pressure: 16 bar
Temperature: 0 °C - 80 °C

The float valve is direct action device, the float or buoy is acting by the thrust of the fluid that finally is transmitted to the valve arm and closing seat. Valves are available in ...

DN: 65 mm - 200 mm
Pressure: 20.7 bar - 41.4 bar
Temperature: 120 °C

... +120°C. • Factory installed UL listed double tamper switch for indoor and outdoor use. • Universal wafer type butterfly valve for connection to ANSI B16 Class 125, ISO 2084/Din 2501 PN16& BSEN 1092 PN 16.

DN: 300 mm - 1,400 mm
Pressure: 6, 10, 16, 25 bar

Middle and low pressure valves The standard line of VAPTECH Butterfly valves cover a diameter range from 300 to 1400 mm and pressure ratings pf 6, 10, 16 and 25 bar. The standard valve ...

Pressure: 25 bar

Forged Brass Chrome Plated Brass Bail Valves Specification • - Fields of applications : Water, Oil, Air, Fire fighting • - Maximum working pressure : PN 25 • - Female thread connection comply with ...

Low-load start-up control valves supply the boiler with the required quantity of feedwater during start-up (30–50% of the water required for full-load operation), regulated by volume, at higher pressure ...

DN: 10 mm
Pressure: 350 bar

The Water spray valves contains a 2/2-way valve cartridge . Connection DN10

DN: 15 mm - 300 mm
Pressure: 16 bar
Temperature: -10 °C - 300 °C

Angle globe valve in PN16 with stainless steel trim.

Temperature: -40 °C - 120 °C

... prevent Pressure lock Schrader valve options: 1/4” or 5/16” schrader valves available Integral schrader access fitting on brass body Full flow port design on valves 3/8” ...

DN: 65, 80, 100, 150 mm
Pressure: 20 psi - 250 psi

The TYCO Model DPV-1 Dry Pipe Valves are differential valves used to automatically control the flow of water into dry pipe fire protection sprinkler systems upon operation of one or more ...

DN: 32 mm - 1,000 mm
Pressure: 20 bar
Temperature: -35 °C - 110 °C

The VTB200 series Butterfly valve is different because of its price and quality. The Butterfly valves can be used for many different applications and media. The body is made from cast iron with an ...

DN: 40 mm - 50 mm

Body Material:PVC Size: DN40(1-1/2")-DN50(2")

Control valve F&A 2353 can be used on any waste water treatment plant with a stable continuous recirculation flow rate. Manually adjusting a ‘telescopic head’ requires many adjustments particularly when ...

... included in the valve. The hydraulic actuator is controled by an hydraulic power unit and an electrical panel. Accesories: Welded constrution to change from square to round section. USE Installation in water ...

DN: 40 mm - 900 mm

MODULATING ALTITUDE VALVE- Single acting. Same construction as Model C000/CF000. Level control with modulation for final filling of storage tanks. CONSULT FACTORY for control valve price list for specific options.

DN: 0.125, 0.25, 0.5, 0.75 in
Pressure: 0 psi - 125 psi
Temperature: -20 °F - 225 °F

Humphrey offers you a variety of air piloted valves within the unique construction of the classic Diaphragm-Poppet Series. Choose diaphragm-poppet valves for your difficult, critical applications when ...

DN: 6 mm - 80 mm
Pressure: 40 bar - 100 bar
Temperature: -20 °C - 130 °C

... tough and is used where special performance is required, for example in the installations of gas and water distribution, industrial and civil heating, water plants at medium and high pressure, hydraulics ...

DN: 0.5 in - 6 in
Pressure: 15 psi - 50 psi
Temperature: -20 °F - 250 °F

Clark Globe Valves 1/2"through 2"are bronze body, NPT screw sort, and are appraised for ANSI Class 250 working pressures. The working temperature ranges from 20° to 250°f. The valve stems are stainless ...

DN: 0.5 in - 4 in
Pressure: 1,000 psi
Temperature: -50 °F - 475 °F

... sales team to actuate your valve package - save time and money with Valtorc International. The series 140 ball valve is the valve used in our most popular 3 piece ball valve ...

DN: 15 mm - 350 mm
Pressure: 1.6 bar - 26 bar
Temperature: -196 °C - 650 °C

P4/J4 series caged globe valve adopted unbalanced trim design, special valve trim and cage top guide structure, offering good dynamic stability. The cage also plays anti-erosion and cavitation roles. ...

Sanitary Stainless Steel SS304 Air Pressure Relief Valve with manometer for fermentation tank Available Standard: ISO,DIN,3A,SMS Valve Type :Safety Valve Seal: Silicon/EPDM/PTFE Application: ...

DN: 50 mm - 1,500 mm
Pressure: 16, 40, 64 bar
Temperature: -30 °C - 250 °C

High performance Double-eccentric wafer Butterfly Valve Name - High performance Double-eccentric wafer Butterfly Valve Characters - Light torque,Bi- direction seal with zéro leakage,one million times1 ...

DN: 10 mm - 200 mm

Tapping valve bridge with lateral outflow and integrated stainless steel drill milling cutter Model 762 (for plastic pipes (PE oder PVC) Tapping valve bridge with stop valve and for ...